WOELKE Industrieelektronik Mining Gas Analyzers and Sensors
Intrinsically safe I M1 Ex ia I Ma gas monitors, ventilation airflow meters, fine dust analyzers and backup power units by WOELKE Industrieelektronik GmbH for underground coal mines and gas drainage pipelines.
MONIMET (GMM) Stationary Sensors & Monitors
MONIMET (GMM series) stationary sensors and monitors feature a molded metal housing with 20 J impact resistance and IP65 protection for continuous underground CH4, CO, CO2, O2, H2S, H2, NO and NO2 monitoring. Units like GMM 01.04 (NDIR) carry I M1 Ex ia I Ma. Sensor heads and filters swap on site.
- ATEX protection I M1 Ex ia I Ma
- 20 J metal housing, IP65 / sensor IP54
- On-site replaceable sensor head and filters
- Analog or RS-485 output, 2 limit switches
ANNOVEX (GMA) Lightweight Sensors & Monitors
ANNOVEX (GMA 01.01 to 14.05, GMA 30.00) units use an antistatic plastic enclosure (7 J, IP65) with plug-in connectors. They monitor CH4, O2, CO and toxic gases under I M1 Ex ia I Ma approval. Replaceable parts include sensor blocks, VDL 4.20/6.20 cables, KSF 3 filters and PGA 3 adapters.
- I M1 Ex ia I Ma, 7 J antistatic housing
- Plug-in VDL 4.20 / 6.20 cables up to 100 m
- Replaceable sensor head and TAS 3 keypad
- Closed-cover calibration via PGA 3 / BDG 3
METHEX 100 (GMA 03.00) Gas Drainage CH4 Monitor
METHEX 100 (GMA 03.00.5x5) monitors 0.0 to 100.0 vol% CH4 in gas extraction pipes via a thermal-conductivity platinum helix sensor. Integrated compensation handles temperature, humidity and pressure drift. Pipe probe RSM 01.xx, dust filter, sensor block and evaluator swap independently.
- Range 0.0–100.0 vol% CH4, I M1 Ex ia I Ma
- Thermal-conductivity platinum helix sensor
- Pipe probe RSM 01.xx with dust filter
- Pluggable sensor and evaluator modules
WMA 15.07 Airflow & AGA 15.15 Pipe Flow Systems
WMA 15.07 thermal airflow monitors (0.15 to 12.00 m/s) and AGA 15.15 differential-pressure units (0.50 to 50.00 m/s) carry I M1 Ex ia I Ma approval for mine roadways and gas drainage pipes respectively. Individual sensor heads and pluggable cables swap without matched pairing.
- WMA 15.07: 0.15–12.00 m/s, 23 mA draw
- AGA 15.15: 0.50–50.00 m/s, 4 limit relays
- Temperature and differential pressure inputs
- Pluggable, individually replaceable modules
FMA 16.16.5xx Fine Particulate Dust Monitors
The FMA 16.16.5xx monitor (I M1 Ex ia op is I Ma) continuously measures fine dust below 4 µm via scattered light. Selectable ranges cover 0–2, 0–20 or 0–400 mg/m3 with analog or RS485 outputs. Optical purge air protects the chamber, and sensor and evaluator modules swap on site.
- Scattered light sensing for < 4 µm dust
- Ranges 0–2, 0–20 or 0–400 mg/m3
- Purge air protection, I M1 Ex ia op is I Ma
- Analog frequency/current or RS485 output
METHAWO 5.100 (HMG 01.03) & IR Portable Detectors
The METHAWO 5.100 (HMG 01.03) portable detector performs personal CH4 monitoring, spot checks and drainage pipe sampling across 0.00 to 100.0% CH4. It features a built-in microcompressor, flow monitor and alarms. Replacement IR or thermocatalytic sensors, probes, hoses and filters are available.
- Range 0.00–5.00–100.0% CH4 with alarms
- Built-in microcompressor with flow monitor
- Thermocatalytic, thermal or IR sensor options
- Attachable gas adapter, hoses and probe
AVS 3 / AVS 4 Alarms, AGS 1 & WDC-02 / FDC 01
Intrinsically safe alarms AVS 3, AVS 3.1, AVS 4, AVS 4.1 and AGS 1 comply with ATEX (EN 60079-0/-11, EN 50303). Ten bright LEDs and a piezo buzzer pulse at 0.5 Hz or priority 1 Hz tones. WDC-02-8/8M/8F collectors and dual-frequency FDC 01 / FDT 01 modules handle telemetry.
- AVS 3 / AVS 4: 10 LEDs and piezo buzzer
- Two control inputs: 0.5 Hz and 1 Hz tones
- Stationary data collectors WDC-02-8 / 8M / 8F
- Dual-frequency wireless FDC 01 / FDT 01
USV 4 / USV 4.2 Intrinsically Safe UPS & PGS 3 Kit
Power units USV 4, USV 4.2 and USV 4.2d (DMT 01 ATEX E 062, I M1 Ex ia I Ma, IP64, 20 J) accept 42/100/230 V AC (max 240 V) and deliver three Ex ia outputs. Two memory-free lead batteries ensure backup runtime. Test gas kit PGS 3 – CH4 includes two 2 L 150 bar cylinders for mine calibration.
- 42 / 100 / 230 V AC input, 3 Ex ia outputs
- Two lead-fleece backup batteries, IP64 20 J
- Optocoupler output for battery charge status
- PGS 3 kit: two 2 L 150 bar cylinders (2% CH4)
Underground Gas Monitoring and Ventilation Systems
WOELKE Industrieelektronik GmbH engineers intrinsically safe I M1 Ex ia I Ma and M2 instruments for underground coal mines, gas drainage pipelines and hazardous industrial facilities.
Stationary MONIMET (GMM) and ANNOVEX (GMA) lines monitor CH4 (0 to 100 vol%), CO, CO2, O2, H2S, H2, NO, NO2, temperature and differential pressure.
Ventilation monitoring relies on WMA 15.07 thermal anemometers (0.15 to 12.00 m/s) and AGA 15.15 differential-pressure flow systems (0.50 to 50.00 m/s), while FMA 16.16.5xx measures fine dust below 4 µm via scattered light.
Equipment selection is defined by target gas, range, output format (analog or RS485) and enclosure type.
Intrinsically Safe Power, Alarms and Calibration Infrastructure
Complete WOELKE installations integrate USV 4, USV 4.2 and USV 4.2d uninterruptible power units operating from 42, 100 or 230 V AC (max 240 V) with three intrinsically safe outputs and two memory-free lead-fleece backup batteries.
Site signaling uses AVS 3, AVS 4 and AGS 1 audiovisual alarm units with 0.5 Hz and 1 Hz priority signals, while WDC-02-8/8M/8F collectors and dual-frequency FDC 01 / FDT 01 radio modules transmit telemetry. Underground verification uses portable PGS 3 – CH4 test gas kits and PGA 3 adapters.
WOELKE Industrieelektronik and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of WOELKE Industrieelektronik and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Steinel Normalien
- Equipment and parts for Vivoil Oleodinamica Vivolo
- Equipment and parts for VIBCO Vibrators
- Equipment and parts for WMW AG
Documents and sources
- Company profile and R&D capabilities — WOELKE Industrieelektronik German site
- Official manufacturer page in Chinese — WOELKE Industrieelektronik
- ATEX I M1/M2 approvals and quality documentation — WOELKE Industrieelektronik
- Product overview and sensor portfolio — WOELKE official site
- Calibration, adjustment and repair services — WOELKE Service
- MONIMET stationary series — manufacturer product page
- MONIMET GMM 01.04.xxx methane analyzer datasheet (PDF, RU)
- ANNOVEX antistatic housing series — manufacturer product page
- ANNOVEX / MONIMET accessories and spare parts datasheet (PDF, EN)
- METHEX 100 methane monitoring system for gas suction lines (PDF, RU)
- WMA 15.07.5xx ventilation airflow meter datasheet (PDF, RU)
- AGA 15.15.xxx ventilation and pipe flow monitor datasheet (PDF, EN)
- FMA 16.16.5xx fine particulate measuring system datasheet (PDF, EN)
- METHAWO 5.100 (HMG 01.03) portable CH4 detector datasheet (PDF, RU)
- AVS 4 intrinsically safe audiovisual alarm datasheet (PDF, RU)
- WDC-02-8 data collectors and FDC 01 / FDT 01 wireless modules — manufacturer page
- USV 4.2 intrinsically safe backup power supply datasheet (PDF, RU)
- PGS 3 – CH4 underground test gas calibration kit datasheet (PDF, RU)
