VIC Venanzetti / Venanzetti Int. Co. Electric & Pneumatic Vibrators
VIC Venanzetti (Venanzetti Int. Co. – FIB srl) covers VV 2-, 4-, and 6-pole electric vibrators up to 13,500 kg centrifugal force, compact single-phase Minivic units, and VVK, VVP, and VVT pneumatic vibrators.
2-Pole VV Electric Vibrators (3000 / 3600 RPM)
Models VV 03/NX 2S through VV 55/NX 2S run at 3000/3600 rpm (50/60 Hz) with 100 to 5000 kg centrifugal force and 180–5000 W rating. High speed with controlled low amplitude suits hoppers, silos, and vibrating tables. Spares: bearings, eccentric weights, covers, terminal blocks.
- Models: VV 03/NX 2S to VV 55/NX 2S (9 sizes, 6–102 kg)
- Ratings: 100–5000 kg force, 10–500 kgmm moment, 230/400 V
- Duty: hoppers, silos, and industrial vibrating tables
- Parts: heavy-duty bearings, weight sets, guards, seals
4-Pole VV Electric Vibrators (1500 / 1800 RPM)
The 4-pole VV 03/BF 2S to VV 70/BF 2S electric vibrators (1500/1800 rpm, 50 to 9000 kgf, 90 to 7000 W) deliver moderate speed and larger amplitude for vibrating screens, feeders, drying screens, and spiral elevators. Spares cover bearings, weights, covers, and stator windings.
- Models: VV 03/BF 2S to VV 70/BF 2S (12 sizes, 6.5–230 kg)
- Ratings: 50–9000 kg force, 20–3260 kgmm moment, 230/400 V
- Duty: vibrating screens, feeders, dryers, spiral elevators
- Parts: shaft bearings, eccentric weight kits, end shields, stators
6-Pole VV Electric Vibrators (1000 / 1200 RPM)
The 6-pole VV 10/BB 2S to VV 120/BB 2S range covers 13 heavy-duty units (11–450 kg weight) delivering 100 to 13,500 kg centrifugal force and 100–9800 W power at 1000/1200 rpm. Wide stroke handles coarse and dense bulk solids. Spares: bearings, weight sets, guards, seals.
- Models: VV 10/BB 2S to VV 120/BB 2S (13 sizes, 11–450 kg)
- Ratings: 100–13,500 kg force, 100–9800 W power, 230/400 V
- Duty: heavy screening machines and dense bulk material handling
- Parts: oversized shaft bearings, balance weights, covers, seals
Minivic Compact Single-Phase Vibrators (VV M1–M3)
Minivic 2-pole units VV M1, VV M2, and VV M3 run on 220 V single-phase power at 3000/3600 rpm, delivering 6 to 45 kg force at 20–45 W and 0.90–2.00 kg weight. Built for gentle dosing in pharma, food, and granule plants. Spares: condensers, power cables, bearings.
- Models: VV M1 (6 kg), VV M2 (24 kg), VV M3 (45 kg force)
- Electrical: 220 V single-phase, 20–45 W, 0.12–0.30 A (230 V)
- Features: power cable on M1; cable plus condenser on M2 and M3
- Parts: motor capacitors, supply cables, ball bearings, housings
VVK Pneumatic Ball Vibrators (VVK-10 to VVK-36)
VVK-10 to VVK-36 units use a high-speed steel ball on a raceway to produce 7300 to 32,000 rpm and 24 to 415 kg force at 2–6 bar (90–675 l/min air). Maintenance-free body has 4 mounting holes for perpendicular or side attachment. Spares: complete units, mufflers, fittings.
- Models: VVK-10, VVK-13, VVK-16, VVK-20, VVK-25, VVK-30, VVK-36
- Performance (2–6 bar): 7300–32,000 rpm, 24–415 kg, 90–675 l/min
- Ports & mass: 1/4" to 3/8" BSP ports, 0.15–1.35 kg housing weight
- Parts: replacement VVK cartridges, air fittings, exhaust silencers
VVP Pneumatic Piston Vibrators (VVP-15 to VVP-50)
VVP-15 to VVP-50 linear piston vibrators deliver 2.5 to 72 kg force at 1700–6100 vpm and 10–200 l/min air consumption (2–6 bar). Instant start requires no external aid, suited for feeders, chutes, filter shaking, and molds. Spares: VVP units, 1/8"–1/4" air ports, mufflers.
- Models: VVP-15, VVP-20, VVP-30, VVP-40, VVP-50 (0.47–3.035 kg)
- Performance (2–6 bar): 1700–6100 vpm, 2.5–72 kg, 10–200 l/min
- Design: strong unidirectional stroke with self-starting piston
- Parts: replacement VVP units, 1/8"–1/4" fittings, air silencers
VVT Pneumatic Turbine Vibrators (VVT-8 to VVT-36)
VVT pneumatic turbine vibrators (VVT-8 to VVT-36, 8000 to 45,000 rpm, 65 to 700 kgf at 2–6 bar) run an unbalanced rotor on two ball bearings for low-noise, maintenance-free screening and compaction. Air flow is 45–740 l/min across 0.25–2.30 kg housings. Spares: VVT units, bearings, fittings.
- Models: VVT-8, 10, 13, 16, 20, 25, 30, 36 (0.25–2.30 kg)
- Performance (2–6 bar): 8000–45,000 rpm, 65–700 kg, 45–740 l/min
- Design: unbalanced rotor on two ball bearings with reduced noise
- Parts: replacement VVT assemblies, bearing kits, 1/8"–3/8" ports
Dual Unidirectional Drive & Frequency Inverter Sizing
A single VV electric vibrator generates rotational elliptical motion, while two identical counter-rotating units on the same plane deliver linear unidirectional force. Above 2000 h/year duty, limit load to 80% centrifugal force and size one shared inverter at 2–3x total motor power.
- Kinematics: single elliptical vibrator or twin linear pair
- Continuous limit: max 80% centrifugal force above 2000 hours/year
- Inverter rule: 1 shared VFD, 2–3x total power, 50%–100% nominal rpm
- Tuning: adjust eccentric weight angles strictly with motor stopped
Italian Vibration Engineering by VIC Venanzetti / Venanzetti Int. Co. – FIB srl
Located in Arese (Milan, Italy), Venanzetti Int. Co. – FIB srl (brand VIC Venanzetti) develops over 70 years of original Venanzetti vibration know-how.
After handling VV electric vibrator sales across Italy in the early 1990s, FIB became the brand owner managing direct production and global distribution.
The catalog spans centrifugal forces from 0 to 13,500 kg for continuous and intermittent duty across CE-marked electric and pneumatic units.
VV 2/4/6-Pole Electric Vibrators & Single-Phase Minivic Units
Two-pole VV 03/NX 2S to VV 55/NX 2S units (3000/3600 rpm, 100–5000 kg force, 180–5000 W) deliver high-frequency, low-amplitude vibration for hoppers, silos, and tables.
Four-pole VV 03/BF 2S to VV 70/BF 2S motors (1500/1800 rpm, 50–9000 kg, 90–7000 W) drive vibrating screens, feeders, drying screens, and spiral elevators.
Six-pole VV 10/BB 2S to VV 120/BB 2S models (1000/1200 rpm, 100–13,500 kg force, 100–9800 W, up to 450 kg) handle heavy machinery with coarse or dense materials. For pharma, food, and granule dosing, 220 V single-phase Minivic units (VV M1, VV M2, VV M3) provide 6–45 kg force at 20–45 W.
Pneumatic Vibrators: VVK Ball, VVP Piston & VVT Turbine Series
VVK-10 to VVK-36 pneumatic ball vibrators (7300–32,000 rpm, 24–415 kg force, 90–675 l/min at 2–6 bar) feature 4-hole perpendicular or side mounting for hoppers, screens, and filter cleaning.
VVP-15 to VVP-50 piston vibrators (1700–6100 vpm, 2.5–72 kg force, 10–200 l/min) start without external components to deliver strong unidirectional strokes on feeders and molds.
VVT-8 to VVT-36 pneumatic turbine vibrators (8000–45,000 rpm, 65–700 kg force, 45–740 l/min) run an unbalanced rotor on two ball bearings for reduced acoustic noise; all pneumatic series adjust via air pressure and flow with zero routine maintenance.
Drive Kinematics, Continuous Duty Derating & Inverter Sizing
A single rotary electric vibrator generates circular elliptical motion, whereas two identical counter-rotating motors mounted rigidly on the same plane produce linear unidirectional force. For continuous operation exceeding 2000 hours/year, limit centrifugal force setting to 80% of maximum.
Eccentric weight amplitude may only be adjusted at complete motor standstill. When varying speed via inverter, power all motors on one machine from a single VFD rated 2–3x total motor power within 50%–100% of nominal rpm.
Share required centrifugal force, pole count, voltage/frequency, or air pressure when requesting selection.
VIC Venanzetti and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of VIC Venanzetti and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for VIBRA FRANCE
- Equipment and parts for Vibrowest Italiana
- Equipment and parts for VIBROTECH
- Equipment and parts for VIBRA Maschinenfabrik Schultheis / VIBRA Schultheis
Documents and sources
- Official Manufacturer Site (Venanzetti Int. Co. – FIB srl)
- English Portal (VIC Venanzetti International Company)
- Brand History (VIC Venanzetti & FIB srl, 0–13,500 kg range)
- Headquarters & Contact Details (Arese, Milan)
- Electric Vibrators Technical Guide (Rotational, Unidirectional & Inverter Rules)
- 2-Pole Electric Vibrators (3000/3600 RPM)
- Technical Datasheet FOGLIO-2-POLI.pdf (VV 03/NX 2S to VV 55/NX 2S)
- 4-Pole Electric Vibrators (1500/1800 RPM)
- Technical Datasheet FOGLIO-4-POLI.pdf (VV 03/BF 2S to VV 70/BF 2S)
- 6-Pole Electric Vibrators (1000/1200 RPM)
- Technical Datasheet FOGLIO-6-POLI.pdf (VV 10/BB 2S to VV 120/BB 2S)
- Minivic Compact Electric Vibrators Page
- Technical Datasheet FOGLIO-MINIVIC.pdf (VV M1, VV M2, VV M3)
- Pneumatic Vibrators Overview (VVK, VVP, VVT)
- VVK Pneumatic Ball Vibrators Page
- Technical Datasheet SERIE-VVK.pdf (VVK-10 to VVK-36)
- VVP Pneumatic Piston Vibrators Page
- Technical Datasheet SERIE-VVP.pdf (VVP-15 to VVP-50)
- VVT Pneumatic Turbine Vibrators Page
- Technical Datasheet SERIE-VVT.pdf (VVT-8 to VVT-36)
