VAF Instruments Marine & Industrial Measurement Systems

ViscoSense 3 and 3D viscosity/density sensors, PT2 and AQ-Rate mass flowmeters, T-Sense and TT-Sense optical torque/thrust meters, Oilcon Mark 6 ODME, ShaPoLi EEXI packages, SPU-3 units, and PEM-4 displays selected by model and nameplate.

ViscoSense® 3 and ViscoSense® 3D Viscosity & Density Sensors

In-line HFO/MGO sensors use an all SS-316 smooth-edged pendulum with no moving parts. ViscoSense 3 measures viscosity and temperature, while 3D adds density for CCAI and mass flow with PT2. Spares include interface boxes, cables, and O-ring kits.

  • All SS-316 pendulum with no moving wear parts
  • Lifetime factory calibration with no field re-calibration
  • Viscosity, temperature, and density output (3D)
  • Spares: interface boxes, sensor cables, O-rings

PT2 Positive Displacement Fuel Flowmeters (J5015PT2–J5050PT2)

Sliding-vane PT2 meters (DN 15–50) monitor engine fuel from -10 to +150 C at up to 40 bar. J5015PT2 to J5050PT2 deliver 37.5 to 380 l/min continuous flow at +-0.2% accuracy. Spares cover carbon vanes, rotors, Viton A O-rings, ball bearings, Hall transmitters, and PT100.

  • DN 15–50 sizes, up to 380 l/min continuous (500 peak)
  • Accuracy better than +-0.2% (1:10), +-0.05% repeat
  • Ductile iron body, 20–40 bar, -10 to +150 C
  • Spares: carbon vanes, Viton A O-rings, Hall & PT100

Industrial Liquid Positive Displacement Flowmeters (up to 320 bar)

VAF liquid meters serve blending, batching, and hydraulic loops from 1 l/h to 960 m3/h. Selected series operate up to 320 bar with tolerance better than +-0.1%, +-0.05% repeatability, and 1:100 rangeability. Spares include NAMUR transmitters, totalizers, and exchange kits.

  • Flow span from 1 l/h up to 960 m3/h (up to 1:100)
  • Operating pressure ratings up to 320 bar
  • Tolerance better than +-0.1%, repeatability +-0.05%
  • NAMUR pulse transmitter, totalizer, exchange kits

AQ-Rate® 6000 HP and 7000 UHP Coriolis Mass Flowmeters

Twin V-shaped stainless tubes deliver obstruction-free mass flow and density for HFO, LNG, and methanol. Series 6000 HP offers 0.4% accuracy while 7000 UHP reaches 0.15% for bunkering. Integral, remote DSP transmitter, and Ex electronics modules are available.

  • Series 6000 HP (0.4%) and 7000 UHP (0.15%) mass accuracy
  • Twin V-shaped stainless steel obstruction-free tubes
  • Direct mass flow (kg/h) and density for HFO, LNG, methanol
  • Integral or remote DSP transmitter and Ex option

T-Sense® and TT-Sense® Optical Torque & Thrust Meters

Non-contact optical sensors mount on propeller shafts without strain gauges or wearing parts. T-Sense measures torque, RPM, and shaft power, while TT-Sense adds thrust for cavitation and fouling checks. Spares include optical heads, clamp bands, and cables.

  • Non-contact optical technology with no strain gauges
  • Torque, shaft power, RPM, and thrust (TT-Sense)
  • Single-cable link to PEM-4 and up to 12 flowmeters
  • Spares: optical sensor heads, clamp bands, cables

Oilcon® Mark 6 Oil Discharge Monitoring Equipment (ODME)

Ballast and slop water monitors comply with MARPOL Annex I, MEPC.108(49), and MEPC.240(65) biofuels. A multiple-scattering cell works without solvents, with auto-zeroing and 30 m separation. Spares cover optical cells, pump seals, brushes, and MCU/EPU boards.

  • MARPOL Annex I, MEPC.108(49) and MEPC.240(65) compliant
  • Multiple-scattering cell, no solvents or hot flushing
  • Automatic self-cleansing, zeroing, up to 30 m link
  • Spares: detector cells, pump O-rings, MCU/EPU boards

VAF ShaPoLi Shaft Power Limitation System (IMO EEXI)

Engine-independent limitation for vessels over 400 GT meets MEPC.335(76) and IACS Rec 172 without altering engine controls. It pairs T-Sense torque sensor, SDB-3 logger, and SBP-3 bridge panel with reserve logging. Spares cover SDB-3, SBP-3, and T-Sense units.

  • Engine-independent setup for vessels above 400 GT
  • Compliant with IMO EEXI, MEPC.335(76), IACS Rec 172
  • T-Sense torque sensor, SDB-3 logger, SBP-3 bridge PC
  • Audible/visual alarms and PSC power-reserve logging

SPU-3 Signal Unit, PEM-4 Panel, IVY® Cloud & VAF Vento®

The IP65 SPU-3 aggregates up to 12 flowmeters and 9 analog inputs into Ethernet RJ45, RS485 Modbus, and NMEA 0183. PEM-4 screens show SFOC and EEOI, IVY handles MRV/CII, and Vento tracks WAPS thrust. Spares include SPU-3 I/O modules and PEM-4 units.

  • SPU-3 (IP65): up to 12 flowmeters and 9 analog channels
  • Ethernet RJ45, RS485 Modbus, and NMEA 0183 outputs
  • PEM-4 touchscreen (SFOC, EEOI) and IVY cloud reporting
  • VAF Vento wind-assistance thrust monitoring (EU ETS)

Fuel Viscosity Control and Mass Flow Metering Architecture

VAF Instruments covers complete marine and industrial fuel monitoring: ViscoSense 3 maintains optimal HFO/MGO injection viscosity, while ViscoSense 3D combines density with PT2 sliding-vane meters (DN 15–50, up to 500 l/min, +-0.2%) or AQ-Rate 6000 HP / 7000 UHP Coriolis meters (0.4% / 0.15%) for true kg/h mass flow.

For industrial blending, batching, and closed hydraulic loops, VAF positive displacement meters span 1 l/h to 960 m3/h with operating pressures up to 320 bar, +-0.1% tolerance, NAMUR pulse outputs, and EN 10204 2.2 / 3.1B material documentation.

Propulsion Monitoring, EEXI Compliance and Telemetry Integration

T-Sense and TT-Sense optical shaft sensors pair with the IP65 DIN-rail SPU-3 (up to 12 flowmeters, 9 analog inputs, Ethernet RJ45, RS485 Modbus, NMEA 0183) and PEM-4 touchscreens to calculate SFOC, EEOI, and propeller thrust without strain gauges.

For regulatory compliance, Oilcon Mark 6 ODME meets MARPOL Annex I and IMO MEPC.108(49) / MEPC.240(65) biofuels, ShaPoLi (SDB-3 and SBP-3) meets MEPC.335(76) / IACS Rec 172 for vessels above 400 GT, and IVY plus VAF Vento deliver MRV, IMO DCS, EU ETS, and WAPS reporting.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.