Sunfab Hydraulics: SAP, SCP, SLPD, SVH Pumps and SCM Motors
Technical overview of Sunfab Hydraulics AB (Sweden): SAP/SAPT and SCP single flow pumps, SCPD and SLPD dual flow pumps, SVH variable pumps, SCM and SAM motors, valves and gearboxes.
SAP and SAPT Fixed Pumps
Single flow piston pumps with fixed displacement in a light metal housing. SAP 012-108 DIN covers 12-108 cm³/rev at up to 400 bar; SAPT 090 and 130 add larger flows at up to 300 bar. The pump is mounted directly on the power take-off or on a frame bracket via an intermediate shaft.
- SAP displacement 12-108 cm³/rev
- SAP pressure up to 400 bar
- SAPT 090 and 130: up to 300 bar
- DIN, SAE and Optimised versions
SCP Fixed Displacement Pumps
SCP fixed displacement piston pumps serve mobile and stationary hydraulics. SCP 012-130 ISO covers 12-130 cm³/rev at up to 400 bar, is drained externally, for left (L) or right (R) rotation. SCP 012-108 SAE has SAE-B and SAE-C shafts and flanges; SCP 084-130 DIN Agri suits tractor PTO drive.
- SCP ISO: 12-130 cm³/rev
- Pressure up to 400 bar
- External drain, L or R rotation
- Agri: 84-130 cm³/rev for tractor PTO
SCPD Dual Flow Pumps
SCPD dual flow pumps of bent-axis design deliver two separate flows. SCPD 56/26 DIN provides 56.0 and 26.0 cm³/rev at up to 400 bar; SCPD 76/76 DIN gives up to 127 + 127 = 254 l/min at 350 bar. They mount directly on gear boxes with engageable and disengageable power take-offs.
- SCPD 56/26: up to 400 bar
- SCPD 76/76: up to 254 l/min
- Bent-axis design
- By-Pass version for use on the move
SLPD In-Line Dual Pumps
SLPD dual flow pumps are of inline design with swash plate: eight sizes from 20/20 to 64/32, three of them with differentiated flows. Maximum pressure is 330-350 bar by model. A Savtec valve version runs hydraulics while the vehicle moves; a special banjo bolt converts the pump to single flow.
- 330-350 bar by model
- Eight sizes 20/20 to 64/32
- Savtec valve for use on the move
- Banjo bolt single-flow conversion
SVH Variable Displacement Pumps
SVH variable pumps are designed for direct mounting at the auxiliary drive (PTO) of commercial vehicles. Displacements are 62, 92, 112 and 130 cm³ with a peak pressure of 450 bar, and the flow is adjustable between 0 and Qmax. Different regulators and tandem pump assembly are available.
- Displacement 62 to 130 cm³/rev
- Peak pressure 450 bar
- Flow from 0 to Qmax
- Regulators and tandem assembly
SCM Bent-Axis Motors
SCM axial piston motors are of the bent-axis type with spherical pistons, built to ISO and SAE standards; the SCM 025-108 M2 has a cartridge flange for winch, slewing, wheel and track drives. Displacement is 10-130 cm³/rev at up to 400 bar and up to 285 kW; a speed sensor is optional.
- 10-130 cm³/rev displacement
- Up to 400 bar and 285 kW
- Double tapered roller bearings
- M2 cartridge flange, 25-108 cm³
SAM Light Weight Motors
SAM 010-130 DIN axial piston motors in a light metal housing suit mobile hydraulics: bent-axis type, spherical pistons, few moving parts and high starting torque. Displacement is 10-130 cm³/rev with max pressure 400 bar, and the light metal housing is corrosion free.
- 10-130 cm³/rev displacement
- Max pressure 400 bar
- Bent-axis, spherical pistons
- Corrosion free light metal housing
Valves, Gearboxes and Sensors
Sunfab accessories cover basic hydraulic installations for bodybuilders: splitter gearboxes SZ 118-154 and SZ 121, By-Pass SBP valves, PRV 32/42 pressure relief valves, a 3/2 directional valve, anti-cavitation and flushing valves, a speed sensor and an injector. Each item has its own datasheet.
- Splitter gearboxes SZ 118-154, SZ 121
- PRV 32/42 and By-Pass SBP valves
- Directional valve 3/2
- Anti-cavitation and flushing valves
Sunfab Series and Drive Selection
Sunfab Hydraulics AB develops and builds pumps and motors in Hudiksvall, Sweden: all core components are made in-house in a plant of over 3500 square meters, and pumps and motors are tested in the company lab and test cells in production.
Fixed single flow pumps are SAP/SAPT (DIN, SAE, Optimised) and SCP (ISO, SAE, Agri); dual flow pumps are SCPD and SLPD; the variable pump is SVH; motors are SCM (ISO, SAE, M2) and SAM.
For a gearbox-mounted PTO used while parked the maker lists SAP, SCP, SVH or SLPD; for use on the move, SCPD with By-Pass or SLPD with Savtec.
Design Types and Versions
SCPD, SCM and SAM are of bent-axis design (the motors with spherical pistons), while SLPD pumps are of inline design with swash plate. SCP and SCPD are supplied for a set rotation, left (L) or right (R); SLPD has an independent direction of rotation.
Flanges and shafts follow DIN, ISO and SAE; SAP/SAPT SAE and SCM SAE offer a two-bolt SAE B2 flange for small sizes (012-034 and 010-034). On SLPD, maximum pressure combined with maximum speed is only allowed in intermittent operation, max 6 seconds per minute.
Oil, Filtration and Maintenance
Oil cleanliness should meet class 18/16/13 per ISO 4406 with 10 µm absolute filtration; the first filter change is after 50 hours, and the oil is changed about every 1000 running hours, at least once a year. Mineral oil: ISO HM VG 32-68.
When checking, the counter pressure of the unloaded pump at the pressure hose must not exceed 2 MPa; sealing washers of the air screws are tightened to 15 Nm.
Sunfab and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Sunfab and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Indexator Rotator Systems
- Equipment and parts for Vektek
- Equipment and parts for Velan
- Equipment and parts for Vecoplan
Documents and sources
- Sunfab website — head office and subsidiaries
- History — ski factory and HIAB
- Product history — first piston pump
- Production — Hudiksvall plant
- We are Sunfab — development and manufacturing in Sweden
- Single flow pumps — series overview
- SAP/SAPT 012-130 DIN pumps — specifications
- SAP/SAPT 012-130 SAE pumps — SAE B2 flange
- SAP 012-108 DIN Optimised pumps — electric drives
- SCP 012-130 ISO pumps — specifications
- SCP 012-108 SAE pumps — shafts and flanges
- SCP 084-130 DIN Agri pumps — tractor PTO
- Dual flow pumps — SCPD and SLPD
- SCPD 56/26 DIN pump — specifications
- SCPD 76/76 DIN pump — flow and pressure
- SLPD 20/20-64/32 DIN pumps — sizes
- Variable flow pumps — overview
- SVH 062-130 pumps — specifications
- Sunfab hydraulic motors — standards and power
- SCM 010-130 ISO motors — design
- SCM 010-130 SAE motors — SAE B2 flange
- SCM 025-108 M2 motors — cartridge flange
- SAM 010-130 DIN motors — specifications
- Sunfab accessories — range
- Datasheets — pumps, motors and valves
- General Instructions 4001 — oil, filters and troubleshooting
