Spinflo machine tool chillers and oil coolers

Industrial EOC oil coolers, EWC water chillers, EAC enclosure air conditioners and vortex tubes for CNC machine tools and spindles.

Industrial oil coolers and spindle chillers series EOC

Spinflo EOC series chillers maintain stable temperatures for spindle and hydraulic oil in CNC machine tools within zero point five degrees. Units ranging from four thousand to one hundred twenty thousand BTU per hour prevent oil breakdown and thermal drift.

Standard cooling capacities spanning from model EOC-40 up to model EOC-1200
Digital microprocessor controller displaying real time temperature readouts
Reinforced heat exchange elements using modern refrigerants R134a and R407C
Hinged electrical enclosure front panel facilitating rapid routine service

Industrial water chillers and fluid coolers series EWC

Spinflo EWC water chillers provide temperature regulation for WEDM tooling, industrial welders and injection molds with zero point three degree accuracy. Closed stainless fluid loops prevent contamination and maintain flow rates under continuous duties.

Cooling outputs from model EWC-20 through model EWC-1200 for diverse lines
Stainless immersion evaporator assembly engineered for accessible cleaning
Integrated digital self diagnosis panel displaying instant warning signals
Reliable circulation pump group maintaining consistent line pressure fluid

Enclosure air conditioners for control panels series EAC

Spinflo EAC enclosure climate units maintain ideal operating environments inside CNC control cabinets and drive panels. Sealed closed loop airflow completely isolates sensitive electronics from airborne moisture, abrasive dust and workshop oil mists.

Enclosure cooling capacities from EAC-14 up to heavy model EAC-120 units
Sealed closed loop configuration isolating internal electrical assemblies
Electronic thermostat maintaining temperatures between eighteen and forty C
Side mount space saving housing allowing straightforward panel integration

Heat pipe heat exchangers for control cabinets series EEA

Spinflo EEA series heat pipe units provide thermal mitigation for CNC cabinets and telecommunication cubicles through two phase heat pipe loops. Operating without compressors or refrigerants, these exchangers deliver high reliability and low power demand.

Engineered models spanning EEA-10A through heavy duty model EEA-100A units
Closed heat exchange loop isolating sensitive control modules from grime
Compressor free thermal siphon arrangement powered by balanced blower fans
Dual voltage electrical configurations operating at 110V and 220V inputs

Immersion chillers for cutting and grinding fluids series EKC

Spinflo EKC immersion coolers regulate temperature for metalworking fluids and grinding emulsions directly within tank reservoirs. Heavy duty SUS316 stainless immersion coil exchangers eliminate fluid pathway blockages caused by abrasive chips and swarf sludge.

Seven capacity sizes from model EKC-80 up to model EKC-600 for machining setups
Stainless grade SUS316 immersion coil delivering superior corrosion endurance
Constant temperature circuitry tailored for industrial emulsion reservoirs
Direct tank installation eliminating internal piping blockages from sludge

Vortex cold air guns and rotary defogging spin windows RW-V2

Spinflo EGPA vortex cold air guns deliver low temperature air combined with fine oil droplets for cutting edge cooling without refrigerants. Rotary Wiper RW-V2 spin windows feature two hundred fifty millimeter tempered glass discs providing clear CNC views.

Vortex models EGPA-21, EGPB-21 and reservoir units EGPA-PS or EGPA-TS
Pneumatic cutting edge cooling eliminating cutting edge thermal wear
Rotary Wiper RW-V2 tempered glass disc spun by compressed air drives
Bolt mounted and industrial tape mounted enclosure window fittings

Thermal stabilization of high-speed motorized spindles with EOC chillers

Industrial oil coolers of the Spinflo EOC series are engineered to stabilize temperatures of circulating lubricant within CNC machining centers, high-speed grinding spindles and hydraulic circuits.

Intense cutting forces and continuous spindle rotations generate thermal buildup inside high-precision spindle bearings. Without controlled heat removal, spindle shafts undergo thermal growth, leading to tool runout and machining errors on precision workpieces.

Spinflo EOC units feature digital microprocessor controllers maintaining oil temperatures within zero point five degrees Celsius. This precise regulation protects hydraulic systems from oil breakdown, viscosity loss and pressure fluctuations during multi-shift operations.

Closed-loop process fluid regulation with EWC series water chillers

Spinflo EWC series industrial water chillers deliver closed-loop thermal regulation for wire EDM machines, high-frequency welding machines and plastic injection tooling with zero point three degree accuracy.

Fabricated with corrosion-resistant fluid loops, these units safeguard process water from rust particles and prevent mineral deposits inside narrow mold channels or cooling jackets.

The immersion evaporator section integrates smoothly with a stainless water reservoir featuring an accessible top cover for inspection and maintenance. High-output circulation pumps ensure steady fluid flow, guaranteeing uniform heat extraction even under demanding industrial production cycles.

Electrical cabinet protection via EAC conditioners and EEA heat exchangers

To protect automation electronics inside CNC cabinets, servo drives and frequency inverters, Spinflo engineers manufactured EAC side-mounted air conditioners and EEA heat pipe exchangers.

Semiconductor components and logic boards are vulnerable to excessive ambient temperatures and workshop environments saturated with aerosolized cutting oil mists and conductive metallic dust.

Spinflo EAC conditioners feature a completely sealed dual-circuit airflow design that separates interior panel air from external workshop atmospheres.

For compressor-free heat dissipation, EEA heat pipe heat exchangers transfer heat through hermetic two-phase thermosiphons with minimal power consumption.

Immersion cooling of abrasive grinding fluids with EKC series chillers

Spinflo EKC immersion coolers are mounted directly onto machine tool fluid reservoirs to manage temperatures of cutting emulsions and grinding fluids. Standard plate or shell-and-tube heat exchangers frequently clog when processing dirty fluids filled with metal swarf, abrasive grit and sludge.

The EKC design incorporates a smooth-walled immersion heat exchanger made from high-grade SUS316 austenitic stainless steel, providing exceptional resilience against chemical additives and particulate wear.

Direct tank immersion enables rapid thermal stabilization without risking fluid loop blockages or pump cavitation.

Tool tip cooling with vortex cold air guns and visual enclosure inspection

The Spinflo specialized tooling range includes EGPA vortex cold air guns and RW-V2 rotary defogging spin windows.

Vortex air guns convert shop compressed air into a sub-zero cold airflow without refrigerants or electrical wiring, directing cold air with fine oil droplets directly at the cutting edge to eliminate chip adhesion and tool wear.

Complementing dry machining setups, RW-V2 rotary wipers utilize two hundred fifty millimeter tempered glass discs driven by compressed air.

The rapid spinning action clears away heavy coolant spray through centrifugal force, providing operators with unobstructed views of internal machining processes.

Maintenance protocols and matching component selection for Spinflo units

Long-term operational reliability of Spinflo industrial cooling systems depends on adhering to scheduled inspection routines and selecting matching factory components.

The digital control module monitors refrigerant circuit pressures, compressor load and fluid loop parameters, displaying fault codes when abnormal thresholds occur.

Routine condenser fin cleaning, refrigerant charge verification with eco-friendly R134a or R407C blends, and pump seal inspections ensure rated cooling performance while preventing unscheduled downtime across automated production lines.

Spinflo and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Spinflo and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.