Georg Fischer Industrial Piping Systems, Valves, and Pipe Welding Equipment
We provide direct procurement and supply of genuine Georg Fischer AG polymer ball valves, diaphragm valves, electric actuators, ELGEF Plus electrofusion fittings, MSA fusion machines, and Signet analytical flow instrumentation.
Georg Fischer Product Categories and Flow Solutions
Explore the primary lines of Georg Fischer industrial valves, actuation modules, electrofusion PE100 systems, field welding equipment, and Signet sensors with engineering specifications and application parameters.
Industrial Polymer Ball Valves 546 Pro / 543 / 523 Series
Georg Fischer 546 Pro, 543, 523, 542, and 375 series industrial polymer ball valves are engineered for dependable isolation, mixing, and precision throttling of aggressive chemicals, concentrated acids, caustics, deionized water, and process solutions.
The advanced valve architecture features a dynamic floating ball seating design with automatic seal wear compensation, dual stem O-rings, and an integrated controlled shear point for ultimate operational safety.
Available in corrosion-proof PVC-U, PVC-C, PP-H, PVDF, and ABS thermoplastics across nominal sizes DN10 to DN100, these valves handle operating line pressures up to 16 bar.
Standard configurations include lockable ergonomic hand levers with the Multifunction Module and standardized ISO 5211 mounting interfaces for seamless pneumatic and electric actuator retrofitting. Every valve undergoes hydrostatic pressure testing to ensure bubble-tight bi-directional shutoff.
Nominal sizes DN10-DN100, pressure up to PN16, PVDF, PP-H, PVC-U materials, ISO 5211 actuator interface.
Diaphragm Control Valves 514 / 515 / 519 and DIASTAR Actuators
Georg Fischer 514, 515, 517, 519, 314, and 317 series diaphragm valves deliver precision flow modulation and zero-dead-leg containment for abrasive slurries, crystalline suspensions, high-purity chemical reagents, and pharmaceutical fluids.
The optimized hydrodynamic weir body geometry eliminates turbulence and stagnation pockets, facilitating thorough CIP/SIP steam sterilization and cleaning cycles.
Equipped with high-integrity molded diaphragms in EPDM, FKM, NBR, and dual-layer PTFE/EPDM composites with vulcanized studs, these assemblies integrate seamlessly with DIASTAR Ten, Ten Plus, and Sixteen pneumatic actuators providing balanced closing forces up to 16 bar line pressure across straight-through, tee, and Zero Static multi-port valve manifolds.
Integrated travel limiters and optical position indicators prevent excessive mechanical compression of the elastomer seal.
PTFE/EPDM diaphragms, DIASTAR pneumatic actuators up to 16 bar, Zero Static clean-room configurations.
Butterfly Valves 567 / 565 and Check Valves 561 / 582 Series
Georg Fischer 567, 578, and 565 butterfly valves, together with 561 and 562 non-return check valves and 582/586 pressure relief valves, provide high-capacity isolation, regulation, and backflow protection for large-diameter distribution lines from DN50 to DN300.
The double eccentric disc pivot geometry significantly minimizes friction wear along the elastomeric liner, lowering operating torque and extending component service life.
Type 565 plastic butterfly valves adhere strictly to ISO 5752 standard face-to-face dimensions, enabling direct one-to-one drop-in retrofitting of corroded metal valves without expensive piping realignment or flange alterations.
Both wafer and lugged end configurations are available for intermediate and end-of-line industrial installations.
Sizes DN50-DN300, double eccentric disc, ISO 5752 standard, manual gearboxes and actuators.
Electric Actuators EA04-EA250 and Valve Automation Systems
Georg Fischer EA04, EA15, EA25, EA45, EA120, and EA250 electric quarter-turn actuators deliver precise automated modulation and supervisory feedback for industrial ball and butterfly valves within modern SCADA infrastructures.
Built with informative OLED status displays, integrated supercapacitor Fail-Safe battery backup modules for emergency closure, and 4-20 mA / 0-10 V digital positioning cards, they integrate effortlessly into distributed plant architectures.
Flame-retardant glass-fiber-reinforced polypropylene enclosures rated IP67 ensure exceptional mechanical durability in humid and chemically corrosive atmospheres across temperature ranges from -10 °C to +50 °C.
The units support seamless fieldbus connectivity via Profibus DP, Modbus RTU, and digital IO-Link interfaces.
Torque up to 250 Nm, Fail-Safe backup, 4-20 mA positioners, Profibus / Modbus fieldbus support.
ELGEF Plus PE100 Electrofusion Fittings and Branch Saddles
Georg Fischer ELGEF Plus PE100 and stress-crack resistant PE100-RC electrofusion jointing systems deliver monolithic leak-tight integrity for pressurized natural gas, municipal potable water, and industrial fluid transmission lines.
The extensive portfolio encompasses electrofusion couplers from d20 mm up to d1200 mm, spigot reducers, elbows, tees, and modular branch saddles equipped with integrated stainless steel cutters for live under-pressure tapping.
Embedded exposed heating coil technology guarantees optimal thermodynamic heat transfer into the fusion zone, preventing coil displacement and forming consistent weld seams.
Each fitting features an individualized traceability barcode encoding voltage and temperature parameters for automated scanner input.
Diameters d20-d1200 mm, PE100-RC material, barcode weld recognition, under-pressure hot tapping.
Pipe Welding Machines MSA 2.1 / 340, Butt Fusion TM, and IR Plus
1), TM hydraulic butt fusion machines for pipeline diameters up to 1200 mm, and state-of-the-art IR-63 Plus / IR-225 Plus non-contact infrared fusion stations.
Units feature barcode optical scanners, active cooling for continuous high-load welding, and internal memory logging comprehensive weld documentation in standardized PDF formats compliant with DVS 2207 and ISO 12176 protocols.
Rugged weather-resistant housings protect sensitive control electronics during rigorous outdoor trench installations.
ISO 12176 digital traceability, IR Plus non-contact heating, butt fusion capabilities up to 1200 mm.
Georg Fischer Signet process instrumentation and analytical sensors provide continuous, high-precision monitoring of volumetric flow, pH/ORP, electrical conductivity, hydrostatic level, and temperature across water treatment and chemical process lines.
The product family features Signet 2551 insertion electromagnetic flow meters, 515 and 2536 Rotor-X paddlewheel flow sensors, 2724-2726 pH/ORP electrodes equipped with gold-plated DryLoc connectors, 2819-2823 pure water conductivity cells, and multi-parameter Signet 9900 SmartPro transmitters with plug-in relay and 4-20 mA current loop expansion modules.
Industrial Piping Systems SYGEF (PVDF), PROGEF (PP-H), PVC-U, Contain-It
Georg Fischer comprehensive industrial thermoplastic piping systems comprise ultra-pure SYGEF Plus and Standard (PVDF) high-performance fluoropolymers, chemically resilient PROGEF (PP-H, PP-n) polypropylenes, solvent-cemented PVC-U / PVC-C systems, and Contain-It Plus double-containment piping.
Engineered for the safe conveyance of concentrated mineral acids, caustic alkalis, microelectronics-grade deionized water, and hazardous industrial effluent, these engineered polymer piping networks operate reliably across broad thermal spectrums from -40 °C to +140 °C.
The complete catalog encompasses straight pipes, elbows, tees, flange adapters, and KLIP-IT thermal expansion pipe supports.
PVDF, PP-H, PVC-U, PVC-C thermoplastics, Contain-It Plus dual-containment piping.
Supply Scope and Commercial Terms
Procurement of Georg Fischer products is conducted via independent international trade channels.
Pricing, manufacturing lead times, and global shipping schedules are calculated per specific client project.
Material test reports, conformity certificates, and technical documentation are supplied upon agreement.
Standard factory warranties apply to all delivered piping components, valves, and welding equipment.
Engineering Consultation and Automation
We provide comprehensive chemical resistance charts, 3D CAD models, installation manuals, and datasheets.
Our engineering team assists in sizing thermoplastic piping systems to replace corroding metallic lines.
All delivered products are guaranteed brand new, manufactured under rigorous ISO quality standards.
Expert technical guidance is available for actuator bus parameterization and Signet sensor calibration.
Global Sourcing and Delivery of Georg Fischer Systems
We manage turnkey international logistics, customs clearance, transit insurance, and doorstep delivery for all Georg Fischer industrial piping systems and automated valve solutions. All shipments arrive fully backed by complete manufacturer traceability records.
