Equipment and spare partsBrowse manufacturers Search by manufacturerEQUIPTOP HITECH
Select EQUIPTOP grinding machines and machining centres for your parts, materials and production task. Compare four equipment families and request components for an existing machine.
Compare the families and send your task details. Replacement components are identified against the actual machine configuration.
The manual range includes UF-618/618M, UF-818/818M and ESG-618/618M, ESG-818/818M. Start with the workpiece and the intended operator-controlled process. For an existing machine, include every suffix from the nameplate.
Similar model names do not identify the same feed mechanism, spindle assembly or mounting arrangement.
The catalogue separates ESG-1A, ESG-2A and ESG-3A variants. Describe which feed needs automation and how the operator currently runs the process. For replacement components, identify the longitudinal, cross or vertical axis, the operating mode and the motor markings.
A picture of the control panel helps distinguish the installed version.
The Automatic Digital Type family includes ESG-618ASDII, ESG-818ASDII, ESG-1020ASDII and larger models. Compare the machine designation with the plate before preparing a parts list.
A replacement control component also needs its own part number, hardware version and connector photographs; the ASDII family name alone is insufficient for component identification.
The cylindrical-grinder catalogue contains ECG-2740CNC, ECG-2760CNC, ECG-2780CNC, ECG-3540CNC and ECG-3580CNC. Selection starts with the workpiece shape and support method. Provide a drawing, material, mass and the surfaces to be ground.
Retain the complete CNC model designation in an enquiry for either equipment or an existing-machine component.
The ECG-2740CNC table gives a maximum grinding diameter of 270 mm, 400 mm between centres and a maximum workpiece mass of 120 kg. Add the actual ground lengths, stock allowance and workholding details to a machine enquiry.
For spares, include the serial number and the component reference from the machine documentation.
The published values for ECG-3580CNC are a maximum grinding diameter of 350 mm, 800 mm between centres and a maximum workpiece mass of 150 kg. A longer workpiece also needs a defined support and locating arrangement.
Compare the complete machining task rather than choosing only by the largest permitted diameter.
ETM-510 belongs to the Tapping Machining Center range. The manufacturer lists X/Y/Z travels of 510/400/450 mm, a 600×360 mm table and a maximum table capacity of 250 kg. Compare these with the workpiece and fixture together.
A bare-part envelope alone does not describe the space needed for clamping and tool access.
The ETM-510APC table specifies 510/360/450 mm travels and two 560×400 mm tables, with 200 kg capacity per table. Treat it as a separate execution from ETM-510 when comparing the work zone and loading arrangement.
Preserve the APC suffix in replacement-part requests and include a photograph of the installed table mechanism.
The shared specification lists a BT30 tool shank, a standard spindle speed of 8000 rpm and optional speeds of 10000, 12000 and 15000 rpm. An existing machine may have a particular option package.
For a spindle enquiry, provide its markings, the machine serial number and the actual configuration rather than selecting from the family name alone.
The official Linear Way Series comprises EMV-600/600APC, EMV-860, EMV-1020, EMV-1100 and EMV-1300. A machine enquiry should start with the drawing and machining requirements. For axis components, record the installed rail and carriage markings and the axis location.
Keep the model and component identifiers together in the requested-parts list.
The Box Way Series lists VMC-850, VMC-1000, VMC-1100, VMC-1300 and VMC-1360S. Identify the exact execution before requesting a machine or component. A family designation is not a substitute for an assembly number or mounting dimensions.
Preserve suffixes and include the original documentation when comparing replacement components for an existing machine.
EMV-600/600APC share an official product page. Identify the actual variant in every equipment or parts request, and add a photograph of the work zone and table. The image helps connect the requested assembly to its installation.
Use the machine documents to describe the configuration rather than assuming all machines on the shared page are identical.
Send a representative drawing with the surfaces and operations to be completed on the proposed machine clearly marked. Include the workpiece material, condition before machining and the dimensions of the incoming blank.
If several parts share the same process, provide the largest, heaviest and most demanding examples rather than only the easiest component.
Describe the batch size and the way work reaches the machine. A single-piece repair task and a recurring production batch have different loading and operating needs. State whether the enquiry concerns a new operation, replacement of an existing machine or additional capacity.
If current equipment provides a useful reference, include its model and the limitations you want to address.
The part drawing is only one part of the working envelope. Add the vice, magnetic chuck, fixture plate, clamps, centres or other locating equipment used by the proposed process. Show the intended orientation and any access restrictions.
Calculate the relevant load using the workpiece and the equipment carried with it, with units stated consistently.
Record the dimensions needed for loading, tool approach and unloading as well as the nominal machining travel. If existing fixtures must be reused, include their mounting details and photographs. Explain which dimensions are fixed by your process and which can be changed during configuration.
This keeps a useful production requirement separate from an assumption about a particular machine.
Separate essential functions from preferred options in the enquiry. Essential functions come from the part, operation and drawing requirements. Additional items can concern loading, the control arrangement, workholding, filtration, coolant management or tooling.
List these explicitly so that different proposed configurations can be compared against the same technical brief and the same expected scope of supply.
For an existing EQUIPTOP machine, record the complete model, serial number and year shown on the nameplate. Preserve suffixes such as CNC or APC. Include changes made during earlier repairs or upgrades, particularly for controls, drives and auxiliary units.
The installed markings and the appropriate machine documents help identify the configuration that actually requires support.
List the tools, holders, wheels, fixtures and consumables needed for the intended operation separately from the base machine. Give dimensions, material and mounting details where available. If an item already exists at your facility, identify whether it must be reused or is only a reference.
This avoids treating an optional accessory as part of every machine package.
A spare-part line should contain the machine model, component name, part number, quantity and the related photograph or drawing reference. An item number on an illustration is not necessarily a purchase part number: include the linked parts table.
For a complete assembly, list the associated components that must be included so the quotation can be checked against your maintenance request.
Photograph the whole assembly and then its identification, connections and mounting points. Record fit dimensions with units instead of relying on a picture alone. Electrical components need their own nameplates and connector details; mechanical items need the relevant shafts, holes and interfaces.
A marked assembly drawing can explain the location more clearly than a long written description.
Describe a fault as an observation: what stops, under which operating conditions and what the display reports. Keep a suspected replacement part separate from that observation. Include previous component changes and modifications.
For an intermittent issue, a short description of the sequence helps frame the request; a symptom alone does not establish the correct replacement component.
Provide the destination and the practical constraints for placing the machine: access dimensions, unloading arrangements, available floor area and relevant utility information. State the documents required by your receiving process.
These details should be discussed together with the machine configuration rather than added after a technical specification has already been compared or accepted internally.
Identify the representative part and the measurements that will be used to assess the intended process. Keep drawing tolerances, surface requirements and production expectations explicit.
Before agreeing a supply scope, compare model designations, accessories, component quantities and any proposed differences line by line. Retain the agreed specification for receiving and installation checks at your facility.
Stock, price, lead time, origin, dealer status, certification and compatibility are not stated without checking the specific item. The proposed configuration and supply terms are confirmed during quotation. Catalogue values must be checked against the documentation for the required execution.
Attach a part drawing or machine documentation, specify quantity and destination, and leave a contact for our reply.
English-speaking contact