Katsura Machine (Katsura Machine Co., Ltd.): High-Speed Concrete Block & Paver Machines

Japanese Katsura Machine Co., Ltd. concrete block and interlocking paver plants: K2SX (6–10 cycles/min), K2EX, SK-600 and SK-1000 (1.08 m²), K-1200, K260, MK planetary mixers, SPX splitters, and Eco-Cure curing systems.

K2SX Series Hollow Block Machines (F, M, 8, 11)

K2SX models mold JIS 10C–19C concrete blocks at 6–10 cycles/min. Forming spans pallets from 500×470×8 to 1250×470×13 mm for 60–200 mm heights. Dual 7 or 15 kW mold vibrators pair with 22–55 kW hydraulic units. Replaceable parts cover molds, vibrators, agitators, and hydraulic valves.

  • 6–10 cycles/min speed (JIS 12C base)
  • Pallets 500×470 to 1250×470 mm
  • Accepts existing third-party molds
  • 22–55 kW hydraulics, 5200–12,500 kg

K2EX-M & K2EX-11S High-Output Block Machines

K2EX machines apply variable mold vibration for dense concrete block compaction. K2EX-M uses 660×470×9 mm pallets and four 7 kW vibrators, while K2EX-11S uses 1250×470×13 mm pallets for up to 11 JIS 10C blocks. Service parts include eccentric shafts, bearings, pallet feeders, and manifolds.

  • K2EX-M: 640×450 mm, 4×7 kW, 9000 kg
  • K2EX-11S: 1230×450 mm, 55 kW, 13,000 kg
  • Variable mold vibration control
  • Up to 11 JIS 10C blocks per cycle

SK-1000 High-Speed Interlocking Paver Machine

SK-1000 targets high-volume production of interlocking concrete pavers. Its 1.08 m² forming area yields 54 pieces of 200×100 mm pavers (9×6) per cycle. Two-layer molding with cross wiper runs in 13.6 s and single-layer in 8.0 s. Parts include wiper brushes and molds.

  • 1.08 m² large forming area per cycle
  • 54 pavers (200×100 mm, 9×6 layout)
  • 13.6 s two-layer / 8.0 s single-layer
  • Cross wiper face-mix feed system

SK-600 Next-Generation Interlocking Block Machine

The redesigned SK-600 forms 770×1030 mm pavers (30–120 mm height) on 780×1040×9 mm pallets. It pairs updated vibration and feeding units with 74.6 kW power, a 12,000 kg press, and a 2000 kg hydraulic unit. Parts cover vibration tables, feeders, pumps, and seals.

  • Forming area 770×1030 mm, H 30–120 mm
  • Pallet size 780×1040×9 mm
  • 74.6 kW total installed power
  • 12,000 kg press + 2000 kg hydraulic unit

K-1200 Reinforced Permanent Formwork Block Machine

K-1200 achieves immediate demolding for large thin-walled panels (1200×600×40 mm) with expanded metal reinforcement. It integrates into semi-auto or full-auto handling lines. Replaceable parts include large molds, hopper seals, tamper plates, and demolding drives.

  • Large panel size 1200×600 mm
  • 40 mm thin-wall immediate demolding
  • Expanded metal internal reinforcement
  • Semi-auto to full-auto line integration

K260 Fence Foundation Block Machine

K260 specializes in immediate-demolding fence foundation blocks sized 300×300 mm with heights of 200–600 mm. It uses dual 3.7 kW vibrators, 1.5 kW agitator and demolding motors, and 0.5 MPa pneumatic actuation (0.4 m³/min). Parts include air cylinders, deep punches, scrapers, and vibration motors.

  • 300×300 mm cross-section, H 200–600 mm
  • 2×3.7 kW vibrators, 2500 kg machine
  • 0.5 MPa pneumatic feed (0.4 m³/min)
  • Dedicated tall foundation block press

MK Series High-Speed Planetary Concrete Mixers

MK-18 (600 kg), MK-24 (1000 kg), MK-36 (1700 kg), and MK-54 (2400 kg) planetary mixers deliver fast discharge and lump-free pigment dispersion. Features include grease-lubricated gearboxes and optional moisture meters. Parts cover wear liners, scrapers, seals, and bearings.

  • Batch capacity 600–2400 kg (MK-18 to 54)
  • Drive power 15 kW to 2×30 kW
  • High-wear steel liners and scrapers
  • Grease-lubricated planetary gear case

SPX Block Splitters & Eco-Cure Curing Systems

The SPX splitter pairs precision drives with recipe storage and semi-auto changeover to cut rejects and split marks. Eco-Cure suppresses condensation and temperature gradients, cutting curing energy by half and wastewater to 1/100. Parts include blades, sensors, and valves.

  • SPX: recipe control and semi-auto setup
  • Eco-Cure: 50% lower curing energy cost
  • Curing wastewater reduced to 1/100
  • Prevents condensation and chamber corrosion

Selecting Katsura Machine Concrete Block & Paver Production Lines

We configure Japanese Katsura Machine Co., Ltd. block forming lines (K2SX, K2EX, SK-600, SK-1000, K-1200, K260), MK planetary concrete mixers, SPX splitters, and Eco-Cure curing systems matched to pallet size, cycle time, and plant capacity.

For hollow structural blocks (JIS 10C–19C), K2SX and K2EX presses span pallets from 500×470×8 mm (K2SX-F) up to 1250×470×13 mm (K2SX-11 and K2EX-11S, molding 11 blocks of 10C per cycle) at 6–10 cycles/min while accepting existing molds from other manufacturers.

High-Speed Paver Presses SK-600/SK-1000 & Specialty Models K-1200, K260

SK-1000 delivers 1.08 m² per cycle (54 pavers of 200×100 mm in a 9×6 layout), achieving a 13.6 s two-layer cycle with cross wiper or 8.0 s single-layer cycle. The redesigned SK-600 handles 770×1030 mm forming zones (30–120 mm height) at 74.6 kW total installed power.

Specialty immediate-demolding equipment includes K-1200 for 1200×600×40 mm thin-walled reinforced permanent formwork panels and K260 (2500 kg, 0.5 MPa pneumatic feed) for 300×300 mm fence foundation blocks up to 600 mm tall.

MK Planetary Mixers, SPX Splitters & Eco-Cure Curing Technology

Batch preparation relies on high-speed MK-18 (600 kg), MK-24 (1000 kg), MK-36 (1700 kg), and MK-54 (2400 kg) planetary mixers engineered for rapid discharge, lump-free pigment dispersion, grease-lubricated gearboxes, and wear-resistant steel liners.

Post-molding equipment includes recipe-controlled SPX hydraulic splitters for split-face blocks and the Eco-Cure system, which reduces chamber temperature gradients and condensation while cutting curing energy consumption by half and wastewater to 1/100.

Katsura Machine and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Katsura Machine and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.