Vilaser (VI Laser) Precision Laser Soldering & FPCB Equipment
Automated laser wire, paste, and fluxless solder ball soldering machines, QCW/YAG metal welders, FPCB picosecond etchers, and IC substrate inspection systems by Vilaser / VI Laser.
Laser Solder Wire Soldering (VSC1601 / VIL-LWW-CTS2-100)
Vilaser (VI Laser) systems use 915/975/976 nm diode lasers (100–500 W) for 0.5–2.0 mm solder wire on PCBs and terminals. Dual-station and dual-gantry designs cut idle time with ±5 °C closed-loop control. Key spares include wire feeders, CCD optics, and focusing lenses.
- Models: VIL-LWW-CTS2-100, VSC1601
- Laser: 915/975/976 nm, 100–500 W
- Wire feed: 0.5–2.0 mm, ±5 °C loop
- Spares: feeder rollers, CCD, optics
Laser Solder Paste & Ring Soldering (VG811R / VG1601 / VH200)
Vilaser rotary 4-station VG811R, dual-gantry VG1601, and VH200 ring-cutting units handle fine-pitch pads down to 0.12 mm. Built around 915 nm lasers (50–200 W) and thermal feedback, they protect FPCB boards. Spares cover paste valves, cutting blades, and pyrometers.
- Models: VG811R, VG820RT, VG1601, VH200
- Laser: 915 nm, 50–200 W, pitch ≥0.12 mm
- Precision: ≥0.2 mm joint, optional AOI
- Spares: dispensing valves, ring blades
Laser Solder Ball Jetting (VIL-LWMB-CS2 / VIL-LWB-CS2)
Vilaser VIL-LWMB-CS2 and VIL-LWB-CS2 machines mount 1064 nm fiber lasers (50–100 W) on marble bases for fluxless nitrogen jetting. They place 50–200 µm balls above 3 balls/s and fit 200–760 µm pads in CCM and BGA modules. Spares include jetting nozzles and collimators.
- Models: VIL-LWMB-CS2, VIL-LWB-CS2
- Laser: 1064 nm fiber, 50–100 W, air-cooled
- Balls: 50–200 µm (≥3/s), 200–760 µm pads
- Spares: jetting nozzles, N2 valves, optics
Precision Metal Laser Welding (QCW & VM260 YAG)
The Vilaser VM260 Nd:YAG 1064 nm welder integrates dual XYZ stages and 8-axis linkage for aluminum and steel housings. QCW galvo scan systems with F-theta lenses cut welding cycle time by up to 60% on metal shields and sensors. Spares cover xenon lamps, galvo mirrors, and F-theta optics.
- Models: VM260 (1064 nm YAG), QCW Galvo
- Motion: dual XYZ 8-axis, 1600×1500×1800 mm
- Welds: spot, butt, lap & hermetic seams
- Spares: xenon lamps, F-theta lenses, mirrors
Automated Inline FPC/PCB & Optical Module Soldering
Vilaser inline FPC/PCB systems combine gantry loading, circulating fixture conveyors, and AOI inspection at ±0.02 mm repeatability. Supporting 0.2 mm minimum joints and 0.12 mm pad spacing, they serve 10G/100G TOSA/ROSA transceivers. Spares include linear actuators, grippers, and AOI cameras.
- Repeatability: ±0.02 mm gantry positioning
- Joints: ≥0.2 mm diameter, ≥0.12 mm pitch
- Target: 10G/100G TOSA/ROSA & FPC-PCB
- Spares: conveyor belts, clamps, AOI sensors
Enamel Wire Laser Stripping & Custom Automation
Vilaser UV laser wire strippers remove resin coatings across 360° at 500 mm/s using three laser heads and a 4-axis robot without nicking copper cores. Custom cells also weld plastic automotive sensor housings and capacitors. Key spares cover UV modules, galvo mirrors, and HEPA fume filters.
- Speed: 500 mm/s, 3 heads for 360° strip
- Control: 4-axis robot + vision verification
- Custom lines: sensor plastics & capacitors
- Spares: UV laser modules, scan mirrors, filters
FPCB Picosecond Etching & UV/Fiber Laser Marking
Vilaser picosecond dry etching systems pattern 20 µm lines over 650×550 mm with ≤±3 µm stitching, 5 MP CCD alignment (<1 s), and a 50,000-hour laser. UV/fiber markers deliver ≤2% power stability for PCB Data Matrix codes. Spares include F-theta lenses and CCD cameras.
- Etching: ≥20 µm line, 650×550 mm stage
- Accuracy: ≤±3 µm, 5 MP CCD target (<1 s)
- Source life: 50,000 h maskless dry process
- Spares: UV/ps sources, beam expanders, lenses
IC Substrate Defect Inspection, Marking & Sorting
Vilaser dual-station FPCB/IC substrate sorters inspect both sides at up to 1,000 strips/hour with automatic interleaving paper handling and MES/ERP integration. IC marking units run 15–100 W 355/532 nm water-cooled lasers up to 1,000 mm/s. Spares include line-scan cameras and suction cups.
- Throughput: up to 1,000 strips/hour
- Marking: 355/532 nm, 15–100 W, 0.1–1000 mm/s
- Vision: dual-side & line-scan, MES/ERP link
- Spares: line cameras, telecentric lenses, cups
VI LASER (Vilaser) Profile & Laser Processing Architecture
Founded in 2014 in Shaoxing, Zhejiang with an R&D and testing center in Shenzhen, Zhejiang VI Laser Intelligent Equipment Co., Ltd. (Vilaser / VI Laser) engineers precision laser soldering, metal welding, FPCB micromachining, and IC substrate inspection systems.
Its equipment serves optical communication (10G/100G TOSA/ROSA), automotive electronics, power capacitors, semiconductors, and 3C manufacturing.
Systems combine 915/975/976 nm diode lasers with ±5 °C closed-loop thermal feedback, 1064 nm fiber and Nd:YAG sources for fluxless solder ball jetting and metal seam welding, and 355/532 nm UV or picosecond dry-etching platforms with 50,000-hour source longevity.
Line Integration, Vision Control & Export Configuration
Depending on throughput and pad geometry, Vilaser configures desktop and floor-standing dual-station wire units (VIL-LWW-CTS2-100, VSC1601), 4-station rotary paste machines (VG811R, VG820RT), dual-gantry systems (VG1601), and inline conveyorized cells with ±0.02 mm repeatability and post-weld AOI inspection.
IC substrate sorters integrate dual-side line-scan cameras, automatic paper interleaving, and MES/ERP data exchange at up to 1,000 strips/hour. We coordinate machine configuration, voltage/cooling options, and export contract delivery matched to your substrate and joint specifications.
Vilaser and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Vilaser and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Tantec
- Equipment and parts for HSGM
- Equipment and parts for KORLOY
- Equipment and parts for Riels Instruments
Documents and sources
- Vilaser official Chinese portal (products and industry solutions)
- Company profile of Zhejiang VI Laser Intelligent Equipment Co., Ltd.
- Vilaser IP portfolio and quality management systems
- VI LASER official English website
- VIL-LWW-CTS2-100 vision-guided laser solder wire machine (CN datasheet)
- VSC1601 high-precision laser solder wire soldering machine
- VG811R rotary four-station laser solder paste machine (CN datasheet)
- VG1601 dual-gantry laser solder paste welding machine
- VH200 automatic solder ring cutting and laser soldering machine
- VIL-LWMB-CS2 precision microball laser bumping machine
- Dual-station high-precision laser solder ball jetting machine (CN datasheet)
- VM260 automated Nd:YAG 1064 nm metal laser welding machine
- FPC/PCB automatic loading and unloading inline laser soldering line
- UV enamel wire laser stripping machine (CN datasheet)
- FPCB circuit substrate picosecond laser etching machine
- FPCB and IC substrate automatic defect inspection and sorting machine
- Laser marking machine for IC substrates
