Tantec (Tantec Group) Surface Treatment Systems & Parts
Industrial plasma and corona surface treatment equipment from Tantec (Tantec Group / Tantec A/S, Denmark): VacuTEC vacuum chambers, PlasmaTEC-X and SpinTEC30 atmospheric plasma, HV-X generators, RotoTEC-X, SpotTEC, and spare parts.
PlasmaTEC-X & SpinTEC30 Atmospheric Plasma
PlasmaTEC-X, OEM, UR, ProfileTEC, and SpinTEC30 activate polymers, metals, glass, and EPDM profiles. Its 550 VA unit powers a 425 W nozzle at 33 l/min, and SpinTEC30 reaches 70–2800 rpm at 25 m/min. Supply covers nozzles, ceramic bearings, M12 leads, and PlasmaREMOTE.
- 100–250 VAC, 550 VA / 425 W
- Width 6–12 mm; SpinTEC30: 30 mm
- Dry air 5–6 bar, 33 l/min
- Daisy-chain 1–8 units, M12 I/O
VacuTEC & PlasmaLINE Vacuum Plasma Chambers
VacuTEC (2020, 5050, 8080, 100100, VacuTEC+ COAD), RotoVAC, VacuLINE, and PlasmaLINE treat 3D parts, implants, catheters, composites, and electronics. PlasmaLINE runs at 0.1–0.3 mbar and 500–2000 W in 10–30 s cycles. Spares cover oil-cooled electrodes, seals, and valves.
- VacuTEC 2020 / 5050 / 8080 / 100100
- PlasmaLINE vacuum: 0.1–0.3 mbar
- Power 500–2000 W, cycle 10–30 sec
- Oil-cooled electrodes & gas lines
HV-X Power Generators & HT Transformers
Tantec HV-X power generators (HV-X02 200 W, HV-X10 1000 W, HV-X20 2000 W) operate on 100–240 VAC 50/60 Hz with 17 dry or oil-filled HT transformer types (1–40 kV, up to 80 kV), built-in 16-I/O PLC, and standard RS485 4-wire Modbus RTU (57.6 kbaud). Spares cover HT blocks and boards.
- HV-X02 200 W / X10 1 kW / X20 2 kW
- 17 HT transformers: 1–40 kV (to 80 kV)
- Built-in 16 I/O PLC, RS485 Modbus RTU
- Dry & oil-filled HV transformers
RotoTEC-X, BottleTEC & SheetTEC Corona Systems
RotoTEC-X, BottleTEC, SheetTEC, FoamTEC, and LabTEC-X deliver non-contact corona treatment on molded parts, sheets, bottles, and boards in PP, PE, PEEK, ABS, PC, and PS. RotoTEC-X runs at 0.5–15 m/min up to 2000 mm wide and 2000 W. Spares include rotary electrodes, ozone filters, and belts.
- Line speed 0.5–15 m/min, 230 VAC
- Parts up to 100 x 2000 mm
- Substrates: PP, PE, PEEK, ABS, PC, PS
- Proface HMI & ozone filter unit
SpotTEC, CableTEC & PipeTEC Line Treaters
SpotTEC, CableTEC, PipeTEC, NeedleTEC, SyrinTEC, and LabelTEC treat extruded profiles, cables, jacket pipes, needle hubs, syringes, and narrow webs. SpotTEC outputs 2 x 6.5 kV at ~25 kHz (550 or 1100 W) across 45–65 mm up to 20 m/min. Metal electrodes, heads, and blowers are replaceable.
- Output 2 x 6.5 kV at ~25 kHz
- Treatment width 45–65 mm, 5–20 mm gap
- Speed up to 20 m/min, 550 / 1100 W
- Exchangeable metal electrodes
MonTEC Discharge Control, LeakTEC & Dyne Test
MonTEC tracks high-voltage discharge per individual electrode via transmitter and receiver modules feeding real-time PLC logs. LeakTEC detects micro pinholes in molded medical components, alongside OzoneTEC and ZeroNOxTEC units. Service spares cover MonTEC modules and LeakTEC probes.
- Per-electrode HV discharge telemetry
- Real-time PLC & data logging output
- LeakTEC micro-pinhole leak detection
- Dyne Test surface energy verification
Selecting Vacuum Plasma, Atmospheric Plasma, or Corona Systems
Closed-chamber vacuum systems VacuTEC (2020, 5050, 8080, 100100), RotoVAC, VacuLINE, and PlasmaLINE (0.1–0.3 mbar, 500–2000 W) handle complex 3D moldings, medical implants, catheters, and defense electronics.
For targeted in-line or robotic activation, PlasmaTEC-X, PlasmaTEC-X UR, ProfileTEC, and beltless SpinTEC30 cover conductive and non-conductive substrates, while RotoTEC-X and SpotTEC provide non-contact corona treatment.
HV-X Power Architecture and Line Automation
HV-X02 (200 W), HV-X10 (1000 W), and HV-X20 (2000 W) power supplies pair with 17 dry or oil-filled HT high-voltage transformers (1–40 kV / 2–80 kV), a built-in 16-I/O PLC, and RS485 4-wire Modbus RTU (57.6 kbaud) with optional Profibus or CANopen gateways.
PlasmaREMOTE HMI controls 1–8 PlasmaTEC-X generators via M12 interfaces with AirTEC automatic airflow regulation, and MonTEC transmitter-receiver modules track discharge power on every individual electrode.
Substrates, Dedicated Treaters, and Spare Parts Identification
Tantec (Tantec Group / Tantec A/S) systems enhance adhesion on PP, PE, PEEK, ABS, PC, PS, EPDM rubber profiles, glass sheets, foams, and metals across automotive, medical, cable, and packaging production.
Application-specific lines include CableTEC, PipeTEC, BottleTEC, SheetTEC, FoamTEC, NeedleTEC, SyrinTEC, and LeakTEC pinhole testers. Spare part matching relies on generator serial number, HT transformer type, and electrode assembly.
Tantec and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Tantec and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Riels Instruments
- Equipment and parts for Struers
- Equipment and parts for Kulicke & Soffa
- Equipment and parts for Hohner
Documents and sources
- Tantec — plasma and corona surface treatment solutions
- Tantec A/S — company profile, Lunderskov factory, founded 1974
- Tantec surface treater products catalog — plasma, corona, leak detection
- PlasmaTEC-X atmospheric plasma system specifications and AirTEC
- SpinTEC30 rotary atmospheric plasma system specifications
- PlasmaLINE inline vacuum plasma system for medical devices
- HV-X series corona and plasma power supplies and HT transformers
- RotoTEC-X in-line corona treatment for 3D plastic parts
- SpotTEC high-frequency spot corona system specifications
- MonTEC corona and plasma performance monitoring system
- Tantec industrial applications — automotive, cable, medical, LeakTEC
- Tantec support & service — troubleshooting, maintenance, calibration
