Metronelec Electronics QC, SMD and Humidity Control Equipment

Menisco ST88 NEO solderability testers, Contamino CT10/CT100/CT1000 ionic contamination analyzers, MET WASH, MET WAVE, PAS Turbo Max CCR, TRM, and X2B dry cabinets.

Menisco ST88 NEO and ST78 Solderability Testers

Measure capillary wetting forces (mN) and meniscus angle on leads, PCBs, and SMD components down to 0201. Equipped with solder bath, motorized X-Y globule module (1–4 mm), video capture, and optional 100 ppm O2 chamber. Replaceable parts include heaters, force sensors, baths, and optics.

  • Models: Menisco ST88 NEO, ST78
  • Immersion: 0.01–25 mm (ST88) / 0.1–15 mm (ST78)
  • Standards: IPC ANSI J-STD 002/003, IEC, MIL
  • Modules: bath, 1–4 mm globule, X-Y stage, camera

Contamino CT10, CT100 and CT1000 Ionic Contamination Testers

Verify PCBA cleanliness in a closed-loop 2-propanol and deionized water circuit (75/25 or 50/50) per MIL-P-28809, IPC-TR-583, and IEC. Three tank sizes cover 20 to 500 cm2 minimum board areas. Service parts include conductivity cells, circulation pumps, tubing, and resin cartridges.

  • Models: Contamino CT10, CT100, CT1000
  • CT1000 tank: up to 120 × 500 × 660 mm
  • Solution: 2-propanol / DI water (75/25, 50/50)
  • Parts: conductivity cell, pump, resin cartridge

Met Steam 4 Ageing Chambers and PAS Turbo Max CCR

Met Steam 4 features four drawers and automatic water level regulation per MIL STD-833D and IPC J-STD 002/003. PAS Turbo Max CCR removes conformal coatings with a 252 scfm suction fan, UV light, and nozzle de-ionizers. Replaceable items include HEPA filters, valves, heaters, and dust hoses.

  • Models: Met Steam 4, PAS Turbo Max CCR
  • PAS power: 230 V, 50 Hz, 1 A, 59 kg
  • PAS cabinet: 680 × 875 × 735 mm, 252 scfm
  • Parts: HEPA filter, de-ionizer, valve, heater

MET WASH PCBA Cleaning Systems

Execute up to four washes, four rinses, drying, and cooling across 20 programmable cycles. The 490 × 400 × 260 mm chamber pairs with a 25 L Vigon tank with built-in agitation, filtration, and water softener. Service parts include circulation pumps, exit filters, seals, and PCB holders.

  • Model: MET WASH (550 × 630 × 1450 mm)
  • Useful chamber: 490 × 400 × 260 mm
  • Tank capacity: 25 L, 20 wash programs
  • Parts: pumps, drain filter, softener, nozzles

MET WAVE Selective Soldering, MET PLATE and MET BATH

MET WAVE delivers 900 W heating up to 400 °C with titanium tank, turbine, and 360° nozzles up to 70 × 70 mm. MET PLATE hot plates (150×200 to 300×300 mm) and MET BATH M10–M300 titanium solder pots support lead-free alloys. Spare parts include titanium nozzles, impellers, heaters, and regulators.

  • Models: MET WAVE, MET PLATE, MET BATH M10–M300
  • MET WAVE power: 900 W, max 400 °C
  • MET PLATE sizes: 150×200 to 300×300 mm
  • Parts: titanium nozzles, turbine, heater, scrapers

SMD-RC Reel Counters and TRM Tape-and-Reel Machines

SMD-RC counts reels with reverse double-check and barcode printer output. The TRM machine handles 8 to 88 mm tapes at 4 to 40 mm pitch with 10-second rail setup and PSA or hot sealing. Spare parts include stepper motors, blades, CCD cameras, and sensors.

  • Models: SMD-RC, TRM (8–88 mm carrier tape)
  • TRM pitch: 4–40 mm, 10 s tool-free setup
  • Options: CCD inspection camera, pocket sensor
  • Parts: stepper motor, sealing blades, sensors

X2B Dry Cabinets and MMSV / MSV450-800 Vacuum Packers

Modular X2B cabinets (184–1703 L) hold 5% RH per J-STD-033C for MSL 2–6 components. MMSV and MSV450-600-800 sealers provide 450, 600, or 800 mm seams (10 mm wide) with nitrogen or argon inlet. Parts include dehumidifiers, RH sensors, pumps, and sealing wires.

  • Models: X2B (184–1703 L), MMSV, MSV450/600/800
  • Humidity control: 5% RH per J-STD-033C
  • Seal length: 450 / 600 / 800 mm, 10 mm width
  • Parts: dehumidification unit, RH sensor, vacuum pump

Metronelec Laboratory QC, SMD Production and MSL Control Architecture

Metronelec supplies laboratory quality control instruments (Menisco ST88 NEO, Contamino CT10/CT100/CT1000, Met Steam 4, PAS Turbo Max CCR) and SMT production and MSL humidity control equipment (MET WASH, MET WAVE, MET PLATE, MET BATH, SMD-RC, TRM, X2B, MMSV, MSV).

Founded in France in 1975, Metronelec builds test benches compliant with IPC ANSI J-STD 002/003, MIL-P-28809, MIL STD-833D, IEC, and J-STD-033C, complemented since 2019 by W-Tech dry storage, taping, and vacuum packing machinery.

Sizing Test Chambers, Bath Chemistry and Packaging Configurations

Contamino tank selection depends on PCBA envelope—from 25 × 100 × 150 mm on CT10 up to 120 × 500 × 660 mm on CT1000—running 2-propanol and deionized water mixtures at 75/25 or 50/50.

Menisco ST88 NEO configures solder bath and motorized 1–4 mm globule modules with optional 100 ppm O2 inerting, while MSL 2–6 storage scales across X2B modular dry cabinets (184 L to 1703 L) and MSV450/600/800 gas-flush vacuum sealers.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.