Sencon Metal Packaging Sensors, Leak Testers & Gauges
Industrial control and metrology systems from Sencon for 2-piece, 3-piece, and end canmaking lines: machine sensors, spray timing, Quasar II ULTP light testers, SL4000 oven loggers, Master Series, and Benchmark gauges.
Machine Control Sensors (SCS, DPS200, CMS200, HPS200)
Sencon machine sensors protect tooling on DWI bodymakers, cupping presses, and coaters. SCS 9-487-01 and 11-487-00 units detect aluminum cans while ignoring carbide punches. DPS200 cup-drop sensors and CMS200 mandrel units output a fixed 12 ms pulse.
- Supply: 10.5–40 VDC
- DPS200 response: < 1 ms
- CMS200 pulse: 12 ms
- M12 QDC & SCM387 module
Line Control & End Gap Sensors (AMS, LMS, EGS)
Sencon line sensors regulate mass conveyor accumulation without mechanical shock. Area Mass Sensors (AMS2400-12 to 2400-96, AMS600 oily, AMS300 washdown) modulate press VFD speeds. EGS 11-322-04-ex and IAC452A prevent end inversion at seamers.
- AMS width: up to 2394 mm
- Analog VFD modulation
- Modules: IAC452A / T400WR
- QDC 2 m, 5 m, 10 m cables
Spray Timing & Internal Lacquer Detection (LST22, LT80, SC7050)
Sencon LST22 timers (kits 400-00569-00 MEG, 400-00569-01 A20A) and LT80 resolver units synchronize spray guns. SC7050 inspects wet lacquer at 650 cpm for 202–211 cans. Spares cover 213-00569-00 timer boards, dual solenoid drivers, and power supplies.
- SC7050 rate: up to 650 cpm
- False rejects: < 5 per 1M
- Boards: 213-00569-00 / 10563
- 20/40 VDC power & resolvers
Light Leak Testers & Label Vision Systems (Quasar II ULTP, LVC180)
Sencon ULTP V8 light testers with Quasar II detectors inspect up to 5,000 cans per minute for 20 µm pinholes. Rejection of 50 µm defects, split flanges, and cracked domes reaches 100% over E/IP and Modbus. LVC180 checks mixed labels at 4,000 cpm across 180 degrees.
- ULTP V8: up to 5,000 cpm
- Pinhole sensitivity: 20 µm
- Comms: EtherNet/IP & Modbus
- LVC180: 4,000 cpm, 180° view
Oven Temperature Loggers (SL4000, SmartPin, SmartCan, Hexagon)
The rechargeable Sencon SL4000 records cure profiles in pin, IBO, OBO, wicket, and side-stripe ovens without downtime. Kits SL4010, SL4100, SL4200, and SL4300 include PowerDock and Hexagon software. Up to 7 probes work with legacy SL2000 accessories.
- Channels: up to 7 probes
- Operating range: to 375 °C
- Memory: > 260,000 readings
- SL2000 accessory compatibility
Dimensional & Coatings Gauges (Master Series, Benchmark, SI9200, SI9600)
Master Series automatic gauges, Benchmark benchtop units, PG5600 auto raters, SI9200 testers, and SI9600/SI9700 gauges cover 2-piece, 3-piece, and end lines. Units check wall thickness at 12 vertical points, dome depth, and buckle pressure. Probes include SI9750 Hoverprobe, SI9507, and SI9560.
- Master Series: 12+ axial points
- PG5600: 24 cans in 6 min
- SI9200: IP65 & self-check
- Probes: SI9750 / SI9507 / SI9560
Selecting Sencon Systems Across Canmaking Line Stages
From front-end cupping and DWI bodymaking to back-end inspection and metrology labs, Sencon equipment is engineered specifically for 2-piece, 3-piece, aerosol, and bottle can production.
Press and machine sensors (DPS200, SCS 487/387, CMS200, HPS200) withstand hydraulic mist and static discharge at line speeds.
Downstream coating and curing stages combine LST22 spray timing systems, SC7050 wet-lacquer detectors, and rechargeable SL4000 oven loggers with Hexagon thermal analysis software.
Final quality verification relies on Quasar II ULTP V8 light testers (up to 5,000 cpm, E/IP and Modbus) and LVC180 label verifiers.
Metrology Gauges & Coating Measurement Specifications
Master Series fully automatic gauges measure trimmed height, sidewall thickness at up to 12 vertical positions, dome depth, buckle pressure, and axial load without operator variation. Benchmark benchtop units bring the same gauging architecture to offline quality labs.
For enamel rating and film-weight control, plants deploy PG5600 compact auto raters (24-can batch in 6 minutes), IP65-rated SI9200 integrity testers with self-checking stands, and SI9600/SI9700 coating thickness gauges paired with SI9750 Hoverprobe, SI9507, or SI9560 aerosol probes.
Sencon and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Sencon and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Impact Subsea
- Equipment and parts for Imagenex Technology
- Equipment and parts for PASCO scientific
- Equipment and parts for ULT AG
Documents and sources
- About Sencon Group — company profile since 1976
- Sencon Chinese portal — metal packaging solutions
- Short Can Sensors (SCS 487 / 387) & SCM387 module
- Die Protection Cup Drop Sensors (DPS200)
- Can-on-Mandrel Sensors (CMS200, 12 ms pulse)
- High Performance Metal Sensors (HPS200)
- Area Mass Sensors (AMS2400 / AMS600 / AMS300)
- End Gap Control System (EGS / IAC452A)
- Spray Timing Systems (LST22) & spare boards
- Internal Spray Detector (SC7050)
- Can Body Light Tester ULTP V8 with Quasar II
- Label Verifier Vision System (LVC180)
- SL4000 Oven Temperature Logger & kits
- Master Series Automatic Front End Gauge
- SI9200 Semi-Automatic Enamel Rater
- PG5600 Compact Auto Enamel Rater
- SI9600 / SI9700 Coating Thickness Gauges & Hoverprobe
- Sencon Support, Calibration & Repair Resources
