Impact Subsea Underwater Sensors and Sonars
Impact Subsea instrumentation for ROV, AUV and subsea survey: ISS360 and ISP360 sonars, ISA500 and ISA200 altimeters, ISD4000 depth sensors, ISM3D AHRS, ISFMD, Unity and seaMux.
ISS360 and ISS360HD Imaging Sonars
ISS360 and ISS360HD provide 360° scanning for ROV and AUV navigation and obstacle avoidance. Standard titanium housings are depth rated to 6,000 meters. Inductive coupling eliminates slip rings and periodic brush wear. Service parts cover O-ring kits, connectors and pitch/roll modules.
- 360° field of vision with CHIRP acoustics
- 6,000 m titanium housing, no slip rings
- ISS360HD for higher angular resolution
- Optional pitch and roll, seaView setup
ISP360 Profiling Sonar
ISP360 is a mechanically scanned 1°/2° profiling sonar for subsea 3D point-cloud surveys. It operates from 650 kHz to 1.25 MHz using CW, CHIRP or IS³ signalling up to 80 meters. Its titanium housing is rated to 4,000 meters. Service items include O-ring seals, connectors and ARS calibration.
- 1°/2° narrow conical beam, up to 80 m range
- 650 kHz to 1.25 MHz with CW, CHIRP and IS³
- 0.35 mm timing accuracy, 4,000 m titanium housing
- Inductive transducer coupling without slip rings
ISA500 Underwater Altimeter & Echosounder
ISA500 delivers 120+ m range and 1 mm accuracy through a focused 6° conical beam. Operating from 400 to 600 kHz, it avoids crosstalk with nearby sonars and outputs ECHOGRAM backscatter. Optional MEMS AHRS and an 11K deepwater housing are available. Replacement seals and connectors are supported.
- 120+ m range, 6° beam, 1 mm accuracy
- Tunable 400 to 600 kHz acoustic frequency
- Optional ECHOGRAM backscatter and MEMS AHRS
- ISA500-11K deepwater option, digital/analogue I/O
ISA200 Long-Range Altimeter & Echosounder
ISA200 operates at 200 kHz with a 15.2° conical beam to reach beyond 250 meters at 1 mm accuracy. Its monolithic transducer and digital engine output single-range altitude or ECHOGRAM backscatter. Optional MEMS AHRS compensates vehicle tilt. Spare O-ring seals and bulkhead connectors are available.
- 250+ m measurement range at 200 kHz
- 15.2° conical beam with 1 mm accuracy
- Optional ECHOGRAM backscatter and MEMS AHRS
- Protocol emulation and seaView diagnostics
ISD4000 Depth & Temperature Sensor
ISD4000 pairs a piezo-resistive pressure sensor (10–600 bar, ±0.01% or ±0.005% FS) with an RTD probe (±0.1°C or ±0.05°C). Update rates reach 100 Hz for ROV auto-depth control. Optional MEMS AHRS adds heading, pitch and roll. Pressure calibration and seals are supported.
- Pressure ranges 10–600 bar, up to 100 Hz rate
- ±0.01% or ±0.005% FS pressure accuracy
- RTD temperature accuracy ±0.1°C or ±0.05°C
- Optional MEMS AHRS with iron calibration
ISM3D Underwater AHRS Sensor
ISM3D fuses MEMS gyros, accelerometers and magnetometers to output ±1° heading and ±0.07° pitch/roll at up to 250 Hz. An inertial mode rejects magnetic interference near steel. Housings come in 65 mm titanium (6,000 m), acetal (1,000 m) or OEM. Seals and AHRS calibration are supported.
- ±1° heading, ±0.07° pitch and roll, up to 250 Hz
- Inertial mode for magnetic immunity near steel
- 65 mm titanium 6,000 m, acetal 1,000 m or OEM
- Hard and soft iron calibration via seaView
ISFMD Ultrasonic Flooded Member Detection
ISFMD detects flooded subsea structural members ultrasonically with zero gamma or radioactive sources. Built around the ISA500 probe (1 mm accuracy) and orientation sensor, it runs by ROV or diver with optional ISD4000 depth logging. seaView V3 compiles automated reports.
- 100% ultrasonic FMD, zero radioactive sources
- Built on ISA500 probe with 1 mm measurement accuracy
- ROV or diver deployment with orientation sensor
- Optional ISD4000 depth logging and seaView reports
Unity Topside Control & seaMux Multiplexer
The 1U 19-inch Unity and 6,000 m titanium seaMux provide four RS232, RS485 or Ethernet ports with 24 VDC power. Data travels over Ethernet or single-pair VDSL, supporting daisy-chained seaMux units and RS485 y-splice cables. Connectors, harnesses and port diagnostics are supported.
- 4 ports supporting RS232, RS485 or Ethernet
- Software-switched 24 VDC sensor power outputs
- 6,000 m titanium seaMux, Ethernet or VDSL link
- 1U 19-inch Unity computer running seaView
Matching Housing Depth Rating and Pressure Range
Titanium housings on ISS360, ISM3D and seaMux are rated to 6,000 meters, ISP360 to 4,000 meters, and acetal ISM3D to 1,000 meters, with an ISA500-11K option for full ocean depth.
Select ISD4000 piezo-resistive pressure ranges (10, 30, 50, 100, 300, 400 or 600 bar) close to operational depth to preserve ±0.01% or ±0.005% full-scale accuracy.
Acoustic Frequency Separation and Integrated AHRS
ISA200 (200 kHz, 250+ m, 15.2° beam) serves long-range telemetry, while ISA500 (tunable 400–600 kHz, 120+ m, 6° beam) avoids crosstalk with adjacent sonars and adds ECHOGRAM backscatter.
ISM3D and AHRS-equipped sensors provide MEMS heading, pitch and roll up to 250 Hz, with an inertial mode for magnetic immunity near steel structures.
Subsea Multiplexing via seaMux, Unity and seaView V3
seaMux aggregates four RS232, RS485 or Ethernet channels in a 6,000 m titanium housing and transmits to the surface over Ethernet or single-pair VDSL. The 1U 19-inch Unity topside unit switches 24 VDC per port and runs seaView V3 for unified logging and sensor configuration.
Impact Subsea and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Impact Subsea and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Unidata
- Equipment and parts for UK Flowtechnik
- Equipment and parts for PASCO scientific
- Equipment and parts for LUNA OPTICS
Documents and sources
- About Impact Subsea manufacturing in Aberdeen, Scotland
- Impact Subsea sensor service, O-ring replacement and calibration
- ISS360 and ISS360HD 360° imaging sonars
- ISP360 1°/2° profiling sonar specification
- ISA200 and ISA500 underwater altimeters and echosounders
- ISD4000 depth and temperature sensor with optional AHRS
- ISM3D underwater attitude and heading reference system
- ISFMD ultrasonic flooded member detection system
- Unity 1U topside control system specification
- seaMux 6,000 m subsea multiplexer specification
- seaView V3 sensor configuration and logging software
