Ulmer GmbH (Siegfried Ulmer GmbH) Cutting & Handling Machines

Cable and corrugated tube cutters SM15 2PT, SG400, SSM60, WSM30/WSM60, ARG unwinders, ZG200 prefeeders, and DTW400 coilers from Ulmer GmbH (Siegfried Ulmer GmbH) for industrial lines.

Universal Cutting Machines SM15 2PT (SM15 / SM30)

The Ulmer GmbH SM15 2PT servo cutting machine processes stranded cable up to 70 mm² Cu, wire to 10 mm², shrink tubing, foil, and hoses. A 150 mm passage (30 mm center opening) supports multi-lane guiding. Replacement parts cover cutting blades, feed belts, and inlet guides.

  • Cable range: up to 70 mm² Cu stranded / 10 mm² solid
  • Passage: 150 mm width, 30 mm center clearance
  • Feed: servo up to 1.0 m/s, 0.1 mm length step
  • Spares: blades, feed belts, multi-lane guides

Heavy Cable Cutters SG400 touch & SG400 V touch

The SG400 touch and SG400 V touch cut heavy copper cables up to 120 mm² and 150 mm² Cu and rigid hoses up to 30 mm OD. A pull-out cutting head allows fast blade and guide replacement during changeovers. Spares include cutting knives, coated feed belts, and pneumatic actuators.

  • Cross-section: up to 120 mm² / 150 mm² Cu
  • Rigid hoses: outer diameter up to 30 mm
  • Feed: dual coated servo belts, 1.0–1.2 m/s
  • Quick service: pull-out cutting head & guides

Hose Cutting Machine SSM60 Touch (45° Guillotine)

The SSM60 Touch cuts slitted and closed corrugated pipes plus PVC and rubber hoses up to 57–60 mm OD using a 45° guillotine blade. Its 7-inch touchpanel stores job recipes, and guide nozzles ship as standard. Replacement items cover 45° blades, nozzle sets, belts, and valves.

  • Capacity: PVC/rubber hose & corrugated up to 60 mm
  • Cut geometry: 45° pneumatic guillotine blade
  • Control: servo feed to 1.2 m/s, 7" touchpanel
  • Wear parts: 45° blades, guide nozzles, belts

Corrugated Tube Rotary Cutters WSM30 E & WSM60 E

Rotary machines WSM30 E touch (5–32 mm, NW3–NW26) and WSM60 E touch (5–60 mm, NW3–NW50) cut non-slitted corrugated conduits burr-free on the crest via UlmerRotationCut (URC) technology. Slitting and WSM60 ECT camera options exist. Spares include blades, sensors, bearings.

  • WSM30 E touch: 5–32 mm OD (NW3–NW26), 135 kg
  • WSM60 E touch: 5–60 mm OD (NW3–NW50), 200 jobs
  • URC rotary cut: burr-free crest cut + slitting
  • Spares: rotary knives, crest sensors, bearings

Passive Unwinders ARG450–ARG1200 & Tabletop ARG T

Floor-standing ARG450–ARG1200 and tabletop ARG450 T–ARG800 T dereelers handle corrugated tube, hydraulic/pneumatic hose, and light cable coils up to 30 kg. Ball-bearing turntables include a 200 mm guard and anti-overrun brake. Spares include bearings, core rods, brake parts, and casters.

  • Turntables: 450 / 600 / 800 / 1000 / 1200 mm
  • Coil load: up to 30 kg, core ID 130–800 mm
  • Mechanics: 390 mm rods, 200 mm guard, brake
  • Spares: turntable bearings, brake pads, casters

Twin Coiler DTW400 touch & Spool Rewinder KUG300

The DTW400 touch coils 2.0–18.0 mm cables (up to 10 kg per pot, 1.2 m/s) with encoder sync to Ulmer, Metzner, Komax, and Schleuniger lines. The KUG300 rewinds cables and hoses up to 10 mm onto 300×300 mm spools at up to 110 m/min. Spares cover encoders, diverters, and cones.

  • DTW400 touch: 2.0–18.0 mm OD, dual pots up to 10 kg
  • Interfaces: Ulmer, Metzner, Komax, Schleuniger
  • KUG300: up to 10 mm OD, 300×300 mm spools, 400 V
  • Spares: encoders, diverter actuators, clamping cones

Active Prefeeder ZG200 B3S & Sag Control DHS1000 D

The ZG200 B3S pulls cables, hoses, and ropes up to 38.0 mm OD using dual opposing servo belts at 240 N and up to 2.7 m/s through 40.0 mm stainless nozzles. The DHS1000 D uses 5 adjustable light barriers to regulate SAR unwinders and ZG prefeeders. Spares include belts, nozzles, and sensors.

  • ZG200 B3S: up to 38.0 mm OD, 240 N pull, 2.7 m/s
  • Guides: 40.0 mm VA nozzles, mechanical gap scale
  • DHS1000 D: 5 light barriers for SAR800–1250 & ZG
  • Spares: opposing feed belts, VA nozzles, sensors

Passive Stackers PAL 1500 / 3000 & Haul-Off AZ1000 S

PAL 1500 and PAL 3000 passive stackers receive rigid cut cables and profiles up to 30 mm OD and 300 cm length via a 24 VDC pneumatic stainless chute. The AZ1000 S servo haul-off runs up to 1.1 m/s (40×100 mm passage) in extrusion lines. Spares cover solenoid valves, belts, and potentiometers.

  • PAL 1500 / 3000: 150 / 300 cm length, 30 mm OD max
  • Actuation: 24 VDC valve, 4 bar pneumatic chute
  • AZ1000 S: servo up to 1.1 m/s, 40×100 mm passage
  • Spares: 24 VDC valves, haul-off belts, 10-turn pots

Ulmer GmbH (Siegfried Ulmer GmbH) Equipment Portfolio

Founded in 1981 in Herborn, Germany, Siegfried Ulmer GmbH designs and builds specialized machines for cutting, unwinding, prefeeding, sag control, hauling, stacking, and coiling cables, wires, shrink tubing, corrugated conduits, and industrial hoses.

The portfolio spans standalone cutters (SM15 2PT, SG400 touch, SG400 V touch, SSM60 Touch, WSM30 E touch, WSM60 E touch) and peripheral modules compatible with Ulmer, Metzner, Komax, and Schleuniger lines.

Diameter, Cross-Section & Feed Speed Ranges

The universal SM15 2PT cuts stranded copper cables up to 70 mm² through a 150 mm passage, while heavy-duty SG400 and SG400 V units handle 120–150 mm² Cu cables and rigid hoses up to 30 mm OD at 0.1 mm length increments and feed speeds up to 1.2 m/s.

For hoses and conduits, the SSM60 Touch executes 45° guillotine cuts up to 57–60 mm OD, and rotary WSM30 E (NW3–NW26) and WSM60 E (NW3–NW50) cutters apply UlmerRotationCut (URC) for burr-free crest cuts.

Line Integration & Technical Quotation

Upstream and downstream peripherals cover ARG450–ARG1200 coil unwinders (up to 30 kg), ZG200 B3S prefeeders (up to 38 mm OD, 240 N, 2.7 m/s), DHS1000 D 5-barrier sag controllers, PAL 3000 stackers (300 cm), AZ1000 S haul-offs, DTW400 twin coilers, and KUG300 spool rewinders.

SpareX supports worldwide export sourcing of complete Ulmer GmbH (Siegfried Ulmer GmbH) machines and replacement parts; specify material type, OD or cross-section, target cut length, and host line interface.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.