Photonis / Exosens Detectors, IITs & Imaging Systems

Sourcing Photonis / Exosens microchannel plates, Channeltron multipliers, TOF-MS detectors, PhotonPix/LINCam photon counters, 4G/5G/ECHO image intensifiers, Nocturn cameras and nuclear sensors by part number and technical specification.

Microchannel Plates (4–150 mm MCPs)

Photonis / Exosens microchannel plates span 4 to 150 mm in Chevron and Z-Stack assemblies across detection, image, and premium grades. MountingPad rimless plates vent trapped gas to eliminate edge discharges, while TruFlite flatness minimizes ion arrival time jitter in TOF-MS.

  • Custom diameters 4 to 150 mm
  • Chevron and Z-Stack stacks
  • Detection, image, premium grades
  • MountingPad and TruFlite options

Channeltron & Quadrupole Ion Detectors

Photonis / Exosens builds modular ion and electron multipliers for single-quad, triple-quad, and hybrid mass spectrometers on Channeltron, Scintitron, and Helitron platforms. The MAGNUM multiplier family increases linear output current, lowers dark noise, and extends detector service life.

  • Channeltron, Scintitron, Helitron lines
  • MAGNUM high-linearity multipliers
  • Single and triple-quad compatibility
  • Modular replacement by instrument P/N

Time-of-Flight & APD Detector Assemblies

APTOF, BPTOF and MTOF Time-of-Flight detectors and bakeable 300 °C APD assemblies for mass spectrometry and ion detection. Built around LongLife and MountingPad MCPs from 4 to 120 mm, Photonis / Exosens TOF modules fit benchtop and ultra-high-vacuum analytical instruments.

  • APTOF, BPTOF, and MTOF platforms
  • UHV assemblies bakeable to 300 °C
  • 4 to 120 mm MCP APD configurations
  • OEM vacuum-flange or plug-in designs

PhotonPix & LINCam Single-Photon Modules

PhotonPix combines a fast MCP-PMT with CFD electronics for under 30 ps FWHM jitter, sub-2 ns dead time, and 100 MHz continuous (200 MHz burst) count rates. LINCam delivers 40 ps single-photon timestamping at 1 MHz readout and under 10 cps dark noise for FLIM and quantum setups.

  • PhotonPix: 100 MHz continuous, 200 MHz burst
  • Sub-30 ps FWHM jitter, 8 mm active area
  • LINCam: 40 ps timestamping, <10 cps dark
  • 30% Hi-QE photocathode efficiency

4G, 5G & ECHO Image Intensifier Tubes

Photonis / Exosens 4G tubes provide FOM 1800–2100 across 350–1064 nm with fast auto-gating, while 5G reaches FOM 2500–2800 and 82 lp/mm resolution. Commercial ECHO tubes come in 16 mm and 18 mm formats from 57 lp/mm with green P43 or white P45 phosphor screens.

  • 4G IIT: FOM 1800–2100, 64–72 lp/mm
  • 5G IIT: FOM 2500–2800, 82 lp/mm
  • ECHO IIT: 16/18 mm, FOM 1400–2200
  • P43 green and P45 white phosphor

Cricket Scientific IIT Adapters & Hi-QE

Cricket 2 (C-Mount, 18 mm) and Cricket Pro (F-Mount, 18/25 mm) add 1:1 image intensification to CCD and CMOS cameras across 130–900 nm. Integrated TTL gating switches down to 3 ns (5 ns at 25 mm) at 300 kHz with Hi-QE, SolarBlind, or Broadband photocathodes.

  • Cricket 2 (C-Mount) & Cricket Pro (F-Mount)
  • Fast gating down to 3 ns, 3 MHz burst
  • 130–900 nm Hi-QE and SolarBlind options
  • P43 or P46 phosphor, Quartz/MgF2 window

Nocturn Low-Light CMOS Camera Cores

Photonis / Exosens Nocturn cores (HD-SDI, XL, XS, U3) use Lynx CMOS and SmartColor sensors for continuous daylight-to-starlight imaging. Modules output up to 100 fps at 1.3 Mpx with under 4e- readout noise over HDSDI 720p, CameraLink, LVCMOS, or USB 3.0.

  • Lynx CMOS and SmartColor 1.3 Mpx sensors
  • Up to 100 fps frame rate, <4e- noise
  • HDSDI 720p, CameraLink, USB 3.0 outputs
  • 860 nm and 1064 nm laser detection

Fission Chambers, Gamma & Geiger Detectors

Combining Centronic and Photonis Nuclear lines, Exosens builds FC and CFU fission chambers (FC165, CFUM, CFUL, PFC16), CRGE10 miniature gamma chambers (7 mm OD), and Geiger-Müller tubes. Mineral-insulated high-temperature sensors run up to 600 °C across pulse, Campbell, and DC modes.

  • Fission chambers FC165, CFUM, CFUL, PFC16
  • Pulse, Campbell, and current modes
  • High-temperature designs up to 600 °C
  • CRGE10 gamma chambers and GM tubes

Photonis / Exosens Brand Structure & Engineering Capabilities

The former Photonis Group operates globally under the Exosens umbrella while preserving the Photonis product lineage across microchannel plates, Channeltron electron multipliers, image intensifier tubes, and nuclear detectors.

R&D and manufacturing centers span France, the Netherlands, the UK, the US, and China (Photonis Shenzhen).

Detectors and imaging modules are delivered both as standardized catalog assemblies and as custom OEM subsystems tailored to vacuum flanges, electrical bias chains, and optical mounts.

Selecting Mass Spectrometry & Single-Photon Detectors

For Time-of-Flight (TOF-MS) instruments, APTOF, bipolar BPTOF, and MTOF platforms pair with TruFlite MCPs and 300 °C bakeable APD assemblies. Quadrupole mass spectrometers rely on Channeltron, Scintitron, Helitron, and high-linearity MAGNUM electron multipliers.

Single-photon counting applications such as FLIM, LiDAR, and quantum optics use PhotonPix modules (<30 ps FWHM jitter, 100 MHz continuous / 200 MHz burst rate) and LINCam position-sensitive cameras (40 ps timestamping, <10 cps dark noise).

Image Intensifier Tubes, Cricket Adapters & Nocturn Cores

Image intensifier lines span commercial ECHO (16/18 mm, FOM 1400–2200, 57 lp/mm), 4G (FOM 1800–2100, 350–1064 nm), and 5G (FOM 2500–2800, 82 lp/mm) with green P43 or white P45 phosphor options and fast auto-gating.

Scientific camera integration relies on plug-and-play Cricket 2 (C-Mount) and Cricket Pro (F-Mount) adapters with 3 ns gating across 130–900 nm, while Nocturn cores deliver up to 100 fps via HDSDI, CameraLink, or USB 3.0.

Nuclear Instrumentation & High-Temperature Sensors

Uniting Centronic Limited and Photonis Nuclear Instrumentation, Exosens builds fission chambers (FC165, CFUM, CFUL, PFC16), boron-lined proportional counters, Geiger-Müller tubes, and 7 mm CRGE10 miniature gamma ionization chambers.

High-temperature nuclear detectors operate up to 600 °C using radiation-resistant alumina insulators and integral coaxial or triaxial mineral-insulated cable extensions.

Photonis / Exosens and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Photonis / Exosens and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.