Uni-Valve (Uni-Valve A/S) Industrial Valves and Actuators
Industrial ball valves, butterfly valves, control valves, Wire-Matic WM pneumatic actuators, UNI-EL electric actuators, and automation accessories from Uni-Valve A/S.
Ball Valves UNI-S66, S96, S70 and S36
Three-piece UNI-S66-ISO (DN8-DN150, PN100/PN63) and full-bore UNI-S70 (PN63) stainless steel AISI316 ball valves feature an ISO 5211 top flange. Two-piece flanged UNI-S96 shares identical internals with S66. High-pressure UNI-S36 and S36HT reach PN248.
- Series: UNI-S66-ISO, S96, S70, S36/S36HT
- Ratings: DN8-DN150, PN16-PN100, S36 up to PN248
- Body alloys: AISI316/316L, carbon steel (S70)
- Seats and stem seals: PTFE+15% glass, PEEK, Chevron
Butterfly Valves UNI-VF730 and VF733
Centric butterfly valves UNI-VF730 (wafer) and UNI-VF733 (lug) cover DN40-DN1000 at PN16 for water, steam, air, oil, and chemical lines. Bodies use ductile iron GGG.50 with AISI316 discs. Replaceable elastomer liners in EPDM, NBR, VITON, and Silicone attach via ISO 5211 top flanges.
- Types: UNI-VF730 wafer and UNI-VF733 lug, ISO 5211
- Sizes and pressure: DN40-DN1000, PN16
- Construction: GGG.50 ductile iron, AISI316 disc
- Replaceable liners: EPDM, NBR, VITON, Silicone
Control Sector Valves KS-1 and Pinch UNI-QV100
Ball sector control valves KS-1 (DN40-DN300, Kvs 34-3840) provide rangeability above 100:1 at inlet pressures up to 40 bar and -40 to +170 degC. Pneumatic pinch valves UNI-QV100 (DN20-DN600, up to 5 bar) use stainless steel housings and replaceable sleeves for abrasive or aggressive media.
- KS-1 specs: DN40-DN300, Kvs 34-3840, >100:1 control
- KS-1 seat: carbon/graphite-reinforced PTFE
- UNI-QV100: DN20-DN600, max 5 bar working pressure
- Wear parts: elastomer pinch sleeves and trim sets
Pneumatic Actuators Wire-Matic WM1 and WM2
Anodized aluminum rack-and-pinion actuators WM type 1 (WM2-WM20, WM250-WM400) deliver 21-4543 Nm at 5.5 bar in DA and SR variants. WM type 2 (WM8-WM150, 133-1655 Nm) adds external stroke stops and a replaceable BAK body adaptor kit per ISO 5211 and NAMUR standards.
- Models: WM2-WM20, WM8-WM150, WM250-WM400 (DA/SR)
- Torque range: 21-4543 Nm at 5.5 bar air supply
- Interfaces: ISO 5211, DIN 3337, NAMUR VDI/VDE 3845
- Service kits: seals, BAK adaptors, WM-KN housings
Electric Actuators UNI-EL-0020 to UNI-EL-9000
Quarter-turn electric actuators UNI-EL-0080 (80 Nm) and UNI-EL-0100 to 9000 (100-9000 Nm) accept 24 VDC, 1x230 VAC, or 3x400 VAC in IP67 powder-coated aluminum enclosures. Features include self-locking worm gearing, anti-condensation heater, torque limiters, and optional RPC 4-20 mA modules.
- Models: UNI-EL-0020/0040/0080 and 0100-9000 (100-9000 Nm)
- Power and rating: 24 VDC, 1x230 VAC, 3x400 VAC, IP67
- Built-in: worm gear, space heater, manual override
- Options: RPC 4-20 mA positioner, CT module, Ex/ATEX
Positioners UNI-EP-600, UNI-ITS Boxes and Dampers
Valve automation packages include IP67 limit switch boxes UNI-ITS100/110 and 4-20 mA electro-pneumatic positioners UNI-EP-600R/L (1-7 bar, IP66). Hot-air and flue-gas dampers UNI-RG731 handle DN150-DN1500 up to 600 degC, while UNI-PRV53 valves control pressure up to 10 bar.
- UNI-ITS100/110: mechanical or inductive switches, IP67
- UNI-EP-600: rotary/linear I/P positioner, 4-20 mA
- UNI-RG731 dampers: DN150-DN1500, max 3 bar, 600 degC
- UNI-PRV53: AISI316, DN15-DN25, PN25, 0.5-10 bar
Engineering Selection of Uni-Valve A/S Valves and Actuators
Uni-Valve A/S (founded in 1984 in Glostrup, Denmark) supplies industrial shut-off and control valves (UNI-S66-ISO, S96, S70, S36/S36HT, VF730, VF733, KS-1, UNI-QV100, UNI-PRV53, UNI-RG731) paired with Wire-Matic WM pneumatic actuators, UNI-EL electric actuators, UNI-ITS100/110 limit switch boxes, and UNI-EP-600 positioners via ISO 5211 and NAMUR VDI/VDE 3845 interfaces.
Selection covers body alloys (AISI316/316L, GGG.50 ductile iron, carbon steel), seat and liner materials (PTFE + 15% glass, PEEK, EPDM, NBR, VITON, Silicone), nominal DN/PN ratings, and actuator torque sizing.
Uni-Valve and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Uni-Valve and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for HYDAIRA
- Equipment and parts for JUROP
- Equipment and parts for UniMeasure
- Equipment and parts for Italvibras
Documents and sources
- Uni-Valve A/S — company profile (Glostrup, Denmark)
- Uni-Valve — spare parts and trim sets
- Uni-Valve — valve refurbishment and pressure testing
- Uni-Valve — UNI-S66-ISO three-piece ball valve (DN8-DN150)
- Uni-Valve — UNI-S96 flanged ball valve (DN15-DN100)
- Uni-Valve — UNI-S70 full-bore ball valve (DN8-DN100, PN63)
- Uni-Valve — S36 / S36HT high-pressure and high-temperature ball valves
- Uni-Valve — UNI-VF730 wafer butterfly valve (DN40-DN1000)
- Uni-Valve — UNI-VF733 lug butterfly valve (DN40-DN1000)
- Uni-Valve — KS-1 ball sector control valve (DN40-DN300)
- Uni-Valve — UNI-QV100 pneumatic pinch valve (DN20-DN600)
- Uni-Valve — Wire-Matic WM type 1 pneumatic actuators
- Uni-Valve — WM type 2 pneumatic actuators with BAK adaptor
- Uni-Valve — UNI-EL-0080 compact electric actuator (80 Nm)
- Uni-Valve — UNI-EL-0100 to 9000 electric actuators (100-9000 Nm)
- Uni-Valve — UNI-ITS100 / UNI-ITS110 limit switch boxes
- Uni-Valve — UNI-EP-600 electro-pneumatic positioner
- Uni-Valve — UNI-PRV53 back-pressure valve (DN15-DN25)
- Uni-Valve — UNI-RG731 industrial flue-gas damper
