UniMeasure Linear & Rotary Position Transducers
Engineering selection and quotation for UniMeasure string potentiometers (ZX, FX, LX, JX, Standard, HX), HXLR encoder adapters, RTX rotary sensors, and replacement wire rope hardware.
ZX & FX Subcompact Transducers
ZX (1.5 in / 38 mm stroke) and FX-HM (up to 15 in / 381 mm) string potentiometers fit tight mounting envelopes and dynamic test rigs. ZX-PA-1.5 uses a precision potentiometer, while ZX-HM-1.5 and FX-HM employ non-contact Hall-effect sensing with 0-10 VDC output at 25 Hz.
- ZX range: 1.5 in (38 mm), LVDT size
- FX-HM range: up to 15 in (381 mm)
- ZX-HM resolution: 0.0016 in (0.04 mm)
- FX-HM supply 4.9-30 VDC, 0-10 V out
LX & LX-EM Compact Linear Sensors
The LX series targets light-to-moderate indoor OEM equipment across 12 measurement ranges from 2 in (50 mm) to 50 in (1250 mm). Output options include the LX-PA voltage divider, LX-EP2 quadrature TTL, and LX-EM magnetic encoder with a 7272 push-pull driver compliant with RS-422A.
- 12 ranges: 2 to 50 in (50 to 1250 mm)
- Thermoplastic housing, IP40 (NEMA 1)
- LX-EM: up to 454 counts/in, RS-422A
- LX-EM linearity ±0.10% FS
JX & JX-HM Sealed Linear Transducers
Built in a chemical-resistant thermoplastic housing, JX and JX-HM sensors deliver IP65/IP67 (NEMA 6) protection with an integral dust wiper. Strokes span 50-2000 mm (up to 10 m on JX-EP and JX-HM), offering PA, 4-20 mA, 0-10 VDC, EP, and push-button zero/span programming.
- Strokes 50-2000 mm; JX-HM up to 10 m
- IP67 (NEMA 6) housing, dust wiper
- Outputs: PA, P420, P510, EP, HM4/HM5
- Operating temp -25°C to +75°C, M12
Standard & HX Heavy-Duty Transducers
UniMeasure Standard and HX Series string potentiometers cover strokes up to 80 in (2 m) indoor and 165 ft (50 m) with IP65/IP68 sealing, supporting voltage divider, 4-20 mA, 0-10 VDC, and quadrature outputs. Digital models reach +/-0.03% FS linearity.
- Standard: 13 ranges up to 80 in (2 m)
- HX: 30 ranges up to 165 ft (50 m)
- Linearity: ±0.25% analog / ±0.03% dig.
- IP40 indoor or IP65/IP68 heavy duty
HXLR Encoder Adapter & RTX Rotary
The IP65-rated HXLR linear-to-rotary module adapts draw-wire motion to third-party digital rotary encoders. RTX analog rotary transducers deliver IP65 protection across 20 ranges from 1/8 to 200 shaft turns with voltage divider, 4-20 mA, or 0-10 VDC outputs.
- HXLR: IP65 adapter for 3rd-party enc.
- RTX: 20 ranges, 1/8 to 200 turns
- RTX analog linearity: ±0.30% FS
- Outputs: voltage divider, 4-20 mA, 10V
Wire Rope Kits, Cables & Mounts
Service hardware includes stainless and nylon-jacketed wire rope kits, 10067 auxiliary wire rope extension kits, 10346 right-angle mounting brackets, 10156 two-axis swivel bases, 10325-xm / 10544-xm M12 cables, controlled velocity retraction (CVR), and panel displays.
- 10067 auxiliary wire rope extension
- 10346 bracket & 10156 swivel base
- 10325-xm & 10544-xm M12 cable sets
- CVR retraction option & panel display
UniMeasure Engineering Profile & Operating Principle
UniMeasure, Inc. has manufactured linear position, linear velocity, and rotary position transducers in Corvallis, Oregon (USA) since 1987 under an ISO 9001:2015 quality management system.
Typical installations include injection molding machines, CAT/MRI medical tables, flood-control gates, automotive crash-test rigs, and hydraulic actuators.
In wire-rope transducers, extending the stainless steel cable rotates an internal drum against a torsion retraction spring, driving a precision potentiometer, quadrature digital encoder, non-contact Hall-effect sensor, or velocity tachometer.
Electrical Outputs, Sealing & Mounting Accessories
Series span from 1.5 in (38 mm) in the subcompact ZX line up to 165 ft (50 m) in heavy-duty HX housings.
Available electrical outputs include ratiometric voltage divider (PA), bridge circuit (PB), 4-20 mA loop (P420), 0-10 VDC (P510), quadrature TTL (EP/EP2), and RS-422A compliant Hall-effect digital (LX-EM) or push-button Zero/Span analog (JX-HM).
Environmental ratings range from IP40 (NEMA 1) indoor housings to IP65/IP67/IP68 (NEMA 4X/6) enclosures with integral dust wipers.
Optional hardware includes 10067 wire rope extensions, 10346 right-angle brackets, 10156 two-axis swivel bases, M12 cable assemblies (10325-xm, 10544-xm), and CVR controlled retraction.
UniMeasure and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of UniMeasure and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for INELTA / Inelta Sensorsysteme
- Equipment and parts for British Encoder
- Equipment and parts for Kistler / Kistler Group
- Equipment and parts for Radiodetection
- Equipment and parts for Zama Seter / Zama Sensor
Documents and sources
- UniMeasure official website — position and velocity sensors
- UniMeasure product catalog — all sensor series and accessories
- UniMeasure product selection guide — ranges, IP ratings, outputs
- UniMeasure ZX Series subcompact string potentiometers
- UniMeasure FX Series Hall-effect linear position transducers
- UniMeasure LX Series lightweight linear displacement transducers
- UniMeasure LX-EM datasheet PDF — RS-422A and accessories 10067/10346/10156
- UniMeasure JX Series wet-location linear position transducers
- UniMeasure JX-HM catalog page PDF — IP67, Zero/Span, M12, CVR
- How UniMeasure linear and rotary transducers work
- UniMeasure linear position transducer industrial applications
