JUROP Vacuum Pumps and Blowers

JUROP vacuum pumps and blowers (Italy): PN, PNR/PNE, RV/RVC, R 260 and LC rotary vane pumps and compressors, DL, PVT and HELIX lobe blowers.

PN Vane Vacuum Pumps and Compressors

The PN series are rotary vane vacuum pumps and compressors with air cooling; the PN 155 R is air injection cooled. Lubrication is by adjustable oil drippers or automatic (PN 130, 140, 155), and a vacuum-pressure changeover valve is built in.

  • PN 23: flow 156 m³/h
  • PN 155: flow 910 m³/h
  • PN 23: vacuum up to 90 %
  • PN 155: power at max vacuum 19 kW

PNR and PNE Vane Pumps and Compressors

The PNR is air injection cooled and meant for heavy duty, the air cooled PNE for normal use. Lubrication is automatic and a vacuum-pressure changeover valve is built in. The table lists PNR 73–142 and PNE 73–124; continuous vacuum is 70 % on the PNR and 60 % on the PNE.

  • PNR 73: flow 432 m³/h
  • PNR 142: flow 852 m³/h
  • PNR 104: continuous vacuum 70 %
  • PNE 104: continuous vacuum 60 %

RV, RVC and R 260 Vane Pumps and Compressors

RV and RVC pumps are fan cooled: two fans on the RV360, RV520 and RVC360, one on the RVC210. The R 260 is air injection cooled. These pumps have automatic lubrication, a built-in vacuum-pressure changeover valve and hydraulic drive on request.

  • RV360: flow 612 m³/h
  • RV520: flow 882 m³/h
  • RVC210: pressure up to 2.5 bar abs
  • R 260: flow 620 m³/h

LC Water Cooled Vane Pumps and Compressors

The LC series are water cooled rotary vane pumps and compressors with automatic lubrication, copper oil piping and a built-in vacuum-pressure changeover valve. Continuous vacuum is 80 % on all four models in the table: LC 300, 420, 580 and 750.

  • LC 300: flow 510 m³/h
  • LC 750: flow 1200 m³/h
  • LC 580: vacuum up to 95 %
  • LC 750: weight 308 kg

DL Lobe Blowers and Vacuum Pumps

DL units are oil free lobe blowers and vacuum pumps with air injection cooling; the injection manifold can face the front or the rear, and a check valve sits on the pump inlet. Gearbox with smooth or splined shaft, hydraulic motor on request except DL 220, 270 and 320.

  • DL 75: flow 483 m³/h
  • DL 400: flow 2160 m³/h
  • DL 75: vacuum up to 88 %
  • DL 400: power at max vacuum 61 kW

PVT Tri-Lobe Blowers and Vacuum Pumps

PVT units are tri-lobe blowers and vacuum pumps with air injection cooling and a low noise level; they run without oil and have long life high temperature seals. Direct drive, gearbox on the PVT 200 only, hydraulic motor on request. The series dates from 2002.

  • PVT 60: flow 360 m³/h
  • PVT 700: flow 4345 m³/h
  • PVT 1000: flow 7067 m³/h
  • PVT 60: vacuum up to 93 %

HELIX Helical Tri-Lobe Blowers

HELIX units are blowers and vacuum pumps with helical tri-lobe rotors, air injection cooling and a low noise level; they run without oil. A gearbox is offered on the HELIX 140, 180 and 220 only, hydraulic motor on request. The series dates from 2016.

  • HELIX 140: flow 850 m³/h
  • HELIX 2000: flow 11293 m³/h
  • HELIX 2000: power at max vacuum 295 kW
  • HELIX 850: vacuum up to 91 %

Silencers, Filters and Valves for the Vacuum Line

JUROP makes silencers for DL, PVT and HELIX and silencers with oil separators, including for PN and PNR, aluminium alloy air-water filters and stainless steel water filters, 4-way valves, VJ overpressure valves and check valve units.

  • 4-way valves: manual or pneumatic
  • Water filters: stainless steel
  • Suction unit: for HELIX, PVT and CT
  • Check valve unit: valve, manifold, flange

Selecting JUROP Pumps by Task

JUROP rotary vane pumps and compressors work on both vacuum and pressure: in the PN table the flow runs from 156 m³/h on the PN 23 to 910 m³/h on the PN 155, the PNR 142 gives 852 m³/h and the water cooled LC 750 gives 1200 m³/h. The PNR is meant for heavy duty, the PNE for normal use.

DL lobe blowers give from 483 m³/h on the DL 75 to 2160 m³/h on the DL 400. PVT tri-lobe and HELIX helical units are air injection cooled and run without oil; in the HELIX table the flow reaches 11293 m³/h on the HELIX 2000.

Cooling, Drive and Accessories

The series differ in cooling: air cooled PN and PNE, air injection on the PN 155 R, PNR, R 260, DL, PVT and HELIX, fans on the RV and RVC, water cooling on the LC.

RV and RVC have direct drive, DL units a gearbox with smooth or splined shaft and CW or CCW rotation; a hydraulic motor is available on DL units except DL 220, 270 and 320.

For its pumps JUROP makes silencers and silencers with oil separators, aluminium alloy air-water filters, stainless steel water filters, 4-way valves and a suction unit for HELIX, PVT and CT pumps with horizontal ports.

JUROP Company

JUROP started in 1976 in Villotta di Chions; its first products were air cooled P series vacuum pumps from 3000 to 6500 l/min. The JUROP S.p.A. headquarters and the blowers and vacuum pumps plant are in Azzano Decimo, and JUROP Inc. runs United States operations in Irving, Texas.

Since 1980 JUROP has built suction equipment for undercarriages, trailers and semitrailers using its own vacuum pumps. VAC units handle liquid or dry suction, and Vac-Jet units combine suction with a high pressure pump for sewer line washing.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.