LaserPoint laser power and energy meters

Technical selection of LaserPoint equipment: A and W thermal sensors, the W-12K calorimeter, Blink FR and HS sensors, Pulse Controller, Fit, Cronos and EXTREME probes, photodiodes and PLUS 2, PC-Link, HSM-1000 meters.

Low-power thermal sensors

Low-power thermal heads are rated up to 40 W, up to 200 W intermittent, with convection cooling. The A-02-D12-BBF measures 0.1 to 200 mW over 0.19-25 µm. The A-40/200-D60-HPB with a 60 mm aperture measures energy from 250 mJ to 200 J.

  • Power up to 40 W
  • A-02-D12-BBF: 0.19-25 µm
  • A-40/200-D60-HPB: up to 200 J
  • Convection cooling

Medium-power thermal sensors

Models from A-200 to A-600 are fan cooled and the W-200 and W-600 models are water cooled; the limit is 600 W continuous and 800 W intermittent. The A-600-D40-HPB measures 0.5-600 W and 1-800 J. The W-600-D70-SHC with SHC coating has a 70 mm aperture.

  • Power up to 600 W
  • Up to 800 W intermittent
  • W-600-D70-SHC: 70 mm aperture
  • Fan or water cooling

High-power sensors and calorimeter

Water-cooled heads are rated up to 6 kW continuous and up to 9 kW intermittent: the W-6000-D55-SHC measures 15 W to 6 kW with a 55 mm aperture. The W-3000-D55-SHC weighs 4.2 kg. The W-12K-D55-SHC-U calorimeter measures 100 W to 12 kW without defocusing optics.

  • W-6000-D55-SHC: up to 6 kW
  • W-12K calorimeter: up to 12 kW
  • 55 mm aperture on W-6000, W-12K
  • W series: water cooling

Sensors for pulsed lasers

BB, UVA and UVC sensors measure power and single-shot energy with apertures up to 40 mm. The 20-BB-D40 covers 0.4-5.2 µm and 100 mJ to 20 J, the 10-UVC-D25 covers UV at 0.19-0.25 µm. For high energy density there are the A-40-D33-DIF and A-200-D12-SHC-L.

  • Aperture up to 40 mm
  • 10-UVC-D25: 0.19-0.25 µm
  • 20-BB-D40: energy up to 20 J
  • A-40-D33-DIF: energy up to 60 J

HSM-1000 meter and Pulse Controller

The HSM-1000 connects Blink HS sensors to a PC over Ethernet: 500 Msamples/s, 14-bit ADC, pulse repetition range 1 kHz to 1 MHz. Pulse Controller with the HSM-1000-PC works at up to 0.8 MHz and flags every missing pulse and every pulse below a user-set energy threshold.

  • ADC: 500 Msamples/s
  • HSM-1000: 1 kHz to 1 MHz
  • Pulse Controller: up to 0.8 MHz
  • SMA Trigger IN and OUT

Fit, Cronos and EXTREME power probes

Fit probes are conduction cooled: the Fit-50 covers 0.5-50 W and the Fit-500 covers 5-500 W. The Cronos LP10 measures 200 W to 10 kW with a 65 mm aperture. The EXTREME-40 for 1070 nm measures 500 W to 40 kW without water cooling and comes with a beam positioning target.

  • Fit-500: up to 500 W
  • Cronos LP10: up to 10 kW
  • EXTREME-40: up to 40 kW
  • EXTREME-40: 1070 nm

PD photodiodes and PLUS 2, PC-Link meters

The PD-50-D9-UV and PD-500-D9-VIS are silicon photodiodes, the PD-50-D9-IR is germanium for 800-1800 nm, aperture 9.5 mm. The 380 g handheld PLUS 2 works with thermal sensors, FIT-H probes, EXTREME, photodiodes and Blink FR. The 106 g PC-Link connects thermal heads to a PC.

  • PD-50-D9-UV: 200-1100 nm
  • PD-500-D9-VIS: up to 500 mW
  • PLUS 2: 380 g
  • PC-Link: 106 g

Choosing a laser power meter

LASERPOINT SRL is an independent company based in Vimodrone (province of Milan, Italy) with more than 30 years of developing and manufacturing laser measurement instruments: laser power and energy meters up to multi-kilowatt levels.

Sensors are chosen by power: low-power thermal heads are rated up to 40 W (up to 200 W intermittent), medium-power heads up to 600 W (up to 800 W intermittent), water-cooled heads up to 6 kW (up to 9 kW intermittent).

The W-12K-D55-SHC-U calorimeter measures 100 W to 12 kW, and the EXTREME-40 probe for 1070 nm measures 500 W to 40 kW without water cooling.

Pulsed and ultrafast lasers

For pulsed lasers the range includes the 20-BB-D40 (0.4-5.2 µm, 100 mJ to 20 J) and the 10-UVC-D25 (0.19-0.25 µm); for high energy density there are the A-40-D33-DIF and A-200-D12-SHC-L.

Blink HS measures the energy of each pulse at repetition rates up to 1 MHz and works with the HSM-1000 meter (500 Msamples/s ADC, Ethernet link). Pulse Controller works at up to 0.8 MHz and flags missing pulses and pulses below the energy threshold.

Blink FR has a natural response time of 90 ms typical.

Meters and photodiodes

The 380 g handheld PLUS 2 works with thermal sensors, FIT-H probes, EXTREME, photodiodes and Blink FR; the 106 g PC-Link turns a PC into a meter for thermal heads and OEM FIT-H probes. Thermal sensors come with a DB15 connector or with USB and RS-232.

The PD-50-D9-UV and PD-500-D9-VIS are silicon photodiodes, the PD-50-D9-IR is germanium for 800-1800 nm; the PD-500-D9-VIS measures up to 500 mW. Fiber adapters SMA, ST, FC, LC and SC are available for the photodiodes.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.