BWT Beijing diode and fiber lasers

Selection of BWT Beijing equipment: 793-981 nm pump modules, blue 445 nm lasers, 405 and 830 nm lasers, DDL and DS3 systems, Lightning, Thunder and Ventus fiber lasers and ultrafast lasers.

976 nm pump modules with VBG

Wavelength-stabilized (VBG) pump modules for fiber lasers, including 976nm-3W and 976nm-9W that hold 976 ± 0.5 nm with 105 µm fiber, 976nm-260W gives 976 ± 1 nm with 135 µm, 976nm-530W 976 ± 1 nm with 200 µm. The range also lists 969nm-140W and 981nm-140W with 105 µm fiber.

  • 976nm-9W: ±0.5 nm tolerance
  • 976nm-260W: 135 µm fiber
  • 976nm-530W: 530 W output
  • 969nm-140W: ±1 nm tolerance

915, 940 and 793 nm pump modules

Pump modules for fiber lasers, including 915nm-12W and 915nm-40W with 105 µm fiber, 915nm-250W with 135 µm, 940nm-10W with 105 µm. Among the 793 ± 3 nm modules, 8 W comes with 105 µm fiber, 160 W with 135 µm and 260 W with 200 µm, with feedback protection at 1900-2100 nm.

  • 915nm-250W: 250 W output
  • 940nm-10W: 105 µm fiber
  • 793nm-260W: 200 µm fiber
  • 793 nm: 1900-2100 nm protection

Solid-state laser pump modules

Pump modules for solid-state lasers at 808, 878.6 and 888 nm; the models shown have feedback protection at 1020-1200 nm. 808nm-30W comes with 200 or 400 µm fiber, 808nm-70W with 105 µm. The 878.6 nm modules span 30-170 W, the 888 nm ones 120 and 170 W, all with 200 µm fiber.

  • 808nm-30W: 200/400 µm fiber
  • 808nm-70W: 105 µm fiber
  • 878.6nm-170W: 170 W output
  • 888nm-120W: 200 µm fiber

Blue 445 nm diode lasers

445 nm lasers with 105 µm fiber, including 445nm-4W, 445nm-75W, plus water-cooled 445nm-150W and 445nm-200W, and a 445 nm system at 100-250 W. The 2000 W BDL-CW2000W has a higher absorption rate in copper and aluminum than traditional lasers and runs in continuous and modulated modes.

  • 445nm-200W: water cooling
  • 445 nm system: 100-250 W
  • BDL-CW2000W: up to 5 kHz
  • 445nm-75W: 105 µm fiber

405 and 830 nm lasers for LDI and CTP

The MS series 405nm-30W and 405 nm subsystems at 12, 20 and 50 W use pluggable 400 µm fiber for LDI and maskless lithography. For CTP the range lists 405nm-160mW with 40 µm fiber and 830nm-1W with 50 µm fiber and 0.14 NA; 830nm-2W with 50 µm fiber serves scientific research.

  • 405nm-30W: 400 µm fiber
  • 405 nm subsystem: 12 and 20 W
  • 405nm-160mW: 40 µm fiber
  • 830nm-1W: 0.14 NA

High-power diode laser systems

DDL diode lasers at 1000, 1500, 2000, 3000 and 6000 W run in CW and modulation modes for welding and cladding. DS3 systems at 976 nm (100-300 W, 200 µm fiber) show power, current and temperature on the panel; Mini (50 W) and BDL (100 W) subsystems use pluggable 200 µm fiber.

  • DS3 system: 976 nm, 100-300 W
  • Mini subsystem: 50 W
  • BDL subsystem: 100 W
  • DDL 2000 W: up to 5 kHz

Lightning, Thunder and Ventus fiber lasers

Fiber lasers with CW and modulation modes. The site shows Lightning 1500, 2000, 3000 and 6000 W with a near diffraction-limited beam, Thunder 12, 20, 30, 40 and 60 kW for cutting (12-30 kW also for welding), and air-cooled Ventus 300-1500 W for welding, including handheld.

  • Lightning: 1500-6000 W models
  • Thunder: 12-60 kW models
  • Ventus: air cooling
  • Modes: CW and modulation

Ultrafast lasers

Picosecond IR lasers at 10, 30, 50 and 75 W, a 30 W green laser with above 150 µJ at 200 kHz and Topaz UV lasers at 15 and 30 W. The 20 W femtosecond lasers give above 20 µJ at 1 MHz or above 50 µJ at 400 kHz; the narrow-pulse model gives 200 fs-1.5 ps and above 10 W at 50 MHz.

  • Topaz 15 W: above 18.8 µJ
  • Topaz 30 W: above 30 µJ
  • IR 10 W: above 100 µJ
  • 200 fs-1.5 ps pulse width

Choosing BWT Beijing equipment

BWT Beijing was established in 2003 in Fengtai Park of the Zhongguancun Science and Technology Park in Beijing. Its production and R&D centers are in Jiangsu and Shenzhen, with a production base in Tianjin.

The Fiber and Ultrafast Laser Division was set up in Tianjin in 2017 and a German subsidiary in 2020.

The company makes diode, fiber and ultrafast lasers. Lightning fiber lasers were launched in 2022 and Thunder in 2023. The diode line covers fiber-coupled pump modules, bars and stacks, and high-power diode laser systems.

Choosing a pump module

Fiber laser pump modules include 915, 940, 976 and 793 nm, solid-state ones 808, 878.6 and 888 nm; 969nm-140W and 981nm-140W serve both. The VBG wavelength-stabilized 976 nm modules hold 976 ± 0.5 nm (3 and 9 W) or 976 ± 1 nm (260 and 530 W).

Feedback protection depends on the model: 1020-1200 nm on the 976, 915 and 808 nm modules shown, 1400-1600 nm on 940nm-10W, 1900-2100 nm on 793 nm.

For in-house designs there are bars and stacks with indium or AuSn solder and conduction, microchannel or macrochannel cooling. The Macro Channel vertical stack with 20 bars at 808 ± 10 nm gives 3000 W QCW at 20 ms pulses and 5 Hz.

Lasers for materials processing

High-power DDL diode lasers at 1000-6000 W are used for welding, cladding and surface treatment. According to the manufacturer, blue 445 nm lasers have a high absorption rate in copper and process it without spatter.

Lightning fiber lasers focus close to the diffraction limit; Thunder 12 kW is used for cutting, welding and cladding, Thunder 40 and 60 kW for cutting.

The 10 W picosecond IR laser combines a fiber seed source with a free-space solid-state amplifier. Topaz 15 W and 30 W UV lasers serve display panel, semiconductor and surface processing; the 20 W femtosecond lasers serve display panel processing.

BWT Beijing and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of BWT Beijing and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.