Üstünkarlı (Ustunkarli) Sawmill Machinery & Log Lines
Industrial log sawing lines and woodworking equipment by Üstünkarlı (Ustunkarli): UHM and UHYB band saws, UTA carriages, UDKTY/UTY prisma units, UDKP/UDKD/UDKM multiple rip saws, UDKY edgers and conveyors.
UHM vertical and inclined log band saws
UHM vertical and 17-degree inclined band saws feature special alloy flywheels from 1000 to 1600 mm in diameter. Upper wheel tensioning runs on linear guides for primary log breakdown and tandem setups. Replaceable flywheels, guides, cylinders and wipers are available.
- Flywheels Ø 1000–1600 mm
- Vertical and 17° inclined
- Linear-guide blade tensioning
- Flywheels, guides, cylinders
UTA heavy-duty and 17° inclined log carriages
UTA straight and 17-degree inclined log carriages clamp timber using hydraulic hooks and 90-degree chain-driven turning arms. Steel rope drum drive and programmable electronic sizing control log positioning. Spare hooks, turning chains, ropes and rollers are supported.
- Straight and 17° chassis
- 90° chain turning arms
- Programmable electronic sizing
- Hooks, chains, ropes, rollers
UHYB horizontal log band saws
UHYB horizontal band saws run on hydraulic guide rails with 4000 mm working length and hydraulic blade tensioning. An optional 6-button joystick, support arms and feed rollers streamline log handling. Spare flywheels, hydraulic rails, rollers and cylinders are supplied.
- Hydraulic bandsaw rails
- 90° turning arms and rollers
- Optional 6-button joystick
- Flywheels, rails, hydraulics
UDKTY prisma machines and UTY twin band saws
UDKTY_2 and UDKTY_4_16 prisma machines process 100–400 mm logs with 600 mm circular saws at feed speeds up to 43 m/min. UTY twin band saws form 80–260 mm cants using pneumatic blade tensioning. Spare saw spindles, toothed chains, bushings and rollers are covered.
- Log Ø 100–400 mm, h 350 mm
- Feed up to 43 m/min
- Motors up to 4 × 55 kW
- Spindles, chains, rollers
UDKCC slab chippers and UDKCC_E chipping edgers
UDKCC slab chippers and UDKCC_E chipping edgers mill slabs cleanly using impact-resistant bearing housings and automatic braking. A fixed and movable head travel on linear guides with pneumatic clamping. Replaceable heads, knives, linear guides and bearings are available.
- Quick-change knife system
- Linear head guides
- Automatic braking unit
- Knives, heads, bearings
UDKP, UDKD and UDKM multiple rip saws
Multiple rip saws cover UDKP_100 and UDKP_160 single-spindle chain models, UDKD double-spindle units with digital height display, and UDKM hydromotor roller saws. Hardened alloy spindles and centralized lubrication ensure accuracy. Spare chains, spindles and rollers are ready.
- UDKP_100 / UDKP_160 / UDKD
- Hydromotor roller UDKM
- Centralized lubrication
- Pallet chains, spindles, bushes
UDKY board edgers and UYM / UYYM band resaws
Parallel edgers UDKY_500_120, UDKY_800_120 and UDKY_800_160 handle widths from 30 to 650 mm across 700 and 1000 mm openings. Vertical UYM and horizontal UYYM band resaws split cants precisely. Spare movable saw sleeves, flywheels and toothed rollers are supplied.
- UDKY 30–650 mm width range
- 700 and 1000 mm throats
- UYM and UYYM band resaws
- Saw sleeves, flywheels, rollers
UDKB crosscut saws and conveyor automation
UDKB crosscut machines run a 500×30 mm saw blade at 3000 rpm driven by a 7.5 kW motor with 3 m inlet/outlet conveyors. Mill automation adds chain transfers, hydraulic kickers and sawdust PVC belts. Spare chains, sprockets, pneumatic cylinders and rollers are available.
- Ø 500×30 mm blade, 7.5 kW
- 3 m infeed/outfeed rollers
- Chain and sawdust PVC lines
- Chains, sprockets, pneumatics
Selecting primary breakdown equipment: UHM, UTA, UHYB and UDKTY
Choosing between a UHM vertical band saw with UTA carriage, a UHYB horizontal saw, or a UDKTY prisma machine depends on log diameter range, curvature and target shift output.
UTA carriages suit selective sawing of variable timber, while UDKTY_2 and UDKTY_4_16 target continuous Ø 100–400 mm log runs up to 43 m/min.
UDKCC slab chippers, debarking stages and transversal chain or roller conveyors connect primary breakdown units into a balanced turnkey sawmill layout.
Secondary resawing, multiple ripping and board edging lines
For cant resawing into dimensional lumber, UDKP_100 and UDKP_160 single-spindle chain rip saws, UDKD double-spindle units with digital height display, and UDKM hydromotor roller saws match different cant thicknesses and throughput targets.
UDKY parallel board edgers (700 and 1000 mm throats, 30–650 mm cutting range), UYM/UYYM band resaws and UDKB crosscut stations complete downstream sizing and waste extraction.
Üstünkarlı and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Üstünkarlı and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Urliński / Urlinski
- Equipment and parts for Calsitec / Aircrete Europe
- Equipment and parts for McLanahan
- Equipment and parts for Ditch Witch
Documents and sources
- Üstünkarlı (Ustunkarli) — official manufacturer website
- About Üstünkarlı Makine A.Ş. — Izmir plant and exports
- Engineering expertise, ISO 9001 and CE
- Üstünkarlı general machinery catalogue (PDF, rev. 09.2019)
- Log processing machines (UHM, UTA, UHYB, UDKCC, UTY)
- Prisma machines UDKTY_2 and UDKTY_4_16 — technical details
- Multiple rip saws (UDKP_100, UDKP_160, UDKD, UDKM)
- Band resawing machines (UYM, UYYM)
- Crosscut machines UDKB — technical specifications
- Conveyor systems and line automation
