ROTEX Automation valves and actuators
Source ROTEX Automation solenoid valves, angle seat valves, actuators and positioners for industrial machinery and process lines. We coordinate duty, configuration and supply scope.
Two-way valves 24106 and 24108
ROTEX 24106 and 24108E use a pilot-operated diaphragm design. The range also lists 24106AET, 24106A, 24106ET and 24108ETE versions. Selection connects the fluid duty with the required flow-control arrangement.
- Diaphragm design
- Pilot operation
- 24106 series
- 24108E version
Three-way valves 30106 and 3068
ROTEX 30106 and M3015 are direct-acting three-way valves. Models 3068, 3068A and 3013 use pilot operation. Their different actuation arrangements must match the intended circuit and the installed assembly.
- 30106 direct acting
- M3015 direct acting
- 3068 pilot operated
- 3013 pilot operated
Five-way valves 51424 and 57400
ROTEX lists 51424, 51402, 51401, 51400 and I5001 as single-solenoid five-way valves. The 57400 and I5002 are double-solenoid models. The control arrangement is checked against the pneumatic circuit.
- 51424 single solenoid
- I5001 single solenoid
- 57400 double solenoid
- I5002 double solenoid
Angle seat valves
ROTEX angle seat valves address liquids, gases and steam. Listed models include 40063V01-F6, 40063V01-F1, 25063V01-F6, 20050V01-F1 and 12050V01-F1. These catalogue entries identify a normally closed NC configuration.
- Liquids and gases
- Steam applications
- V01 versions
- Normally closed NC
EHF actuators
The ROTEX download library includes documentation for EHF electro-hydraulic actuators. An actuator is selected as part of the valve assembly. Mechanical coupling and the required valve movement are assessed together.
- EHF product documentation
- EHF electro-hydraulic range
- Valve automation assembly
- Coupling selection
RTX 5 smart positioners
ROTEX provides a dedicated brochure for the RTX 5 smart positioner. A positioner belongs to the valve position-control loop. Replacement assessment considers the actuator, mechanical feedback and requirements of the existing control system.
- RTX 5 series
- Position control
- Actuator coordination
- Product documentation
Selecting a valve assembly
ROTEX Automation Limited supplies fluid-control products under the ROTEX name. A project specification distinguishes the solenoid valve, angle seat valve, actuator and positioner.
The valve controls the fluid path, the actuator creates mechanical movement, and the positioner participates in position control. Several devices may belong to one assembly, but their individual functions and purchasing boundaries remain explicit in the proposed supply.
We source ROTEX Automation components against the intended operating duty. The assessment connects the fluid, temperature, operating conditions, connections and required response when the command is removed. An existing machine provides an installed arrangement to compare against the replacement.
A new production line instead starts with its technical requirements and develops a defined valve configuration before the purchasing scope is fixed.
Buying a complete valve differs from buying a component for an installed unit. The proposal separates the valve body assembly, actuator, positioner and agreed mounting items. This makes different quotations comparable and gives receiving inspection a clear description of what was ordered.
Documentation requirements are coordinated with the selected product and project rather than inferred from the brand name alone.
Pilot-operated diaphragm valves
The ROTEX range identifies 24106AET, 24106A, 24106ET, 24108ETE, 24106 and 24108E as two-way valves with a pilot-operated diaphragm design. Sharing a functional principle does not make these versions identical.
Selection connects the specific catalogue item with the fluid duty, command circuit and installation arrangement. The final configuration is reviewed for the chosen version rather than for the complete family.
Pilot circuit operating conditions matter when comparing alternatives. A valve suitable for one line cannot automatically be assigned to a different duty. A quotation therefore refers to a defined configuration.
A maximum value from another model is not substituted for the selected model specification. Spare components are matched to the complete installed valve instead of being treated as universal parts for the ROTEX range.
Integration into a machine also concerns the connections, electrical arrangement and maintenance access. Supply scope can differ from the installed assembly: some items stay on the equipment while others belong to the replacement package.
The proposal records these boundaries so the buyer can distinguish the newly supplied device from existing components that will continue to be used.
Three-way and five-way control
ROTEX lists 30106 and M3015 as direct-acting three-way valves, while 3068, 3068A and 3013 use pilot operation. The number of flow paths describes part of the circuit function, but does not establish identical actuation.
Project review connects the operating method with line routing and the required state after the command is removed. These choices affect the complete assembly rather than an isolated catalogue item.
The five-way models 51424, 51402, 51401, 51400 and I5001 are listed with a single solenoid. Models 57400 and I5002 are listed with two solenoids. Procurement therefore checks compatibility with both the electrical and pneumatic diagrams.
Different command arrangements remain distinct configurations even when their intended machinery belongs to the same application group.
Replacement in an existing machine also involves installation space and connection to the current lines. A new machine requires coordination between the directional valve, moving assembly and control logic. The commercial proposal describes the agreed package.
Any equivalence decision follows a comparison of the selected technical documents, so a similar exterior does not become the sole basis of interchangeability.
Angle seat valves for process lines
ROTEX describes its angle seat valves as products for liquids, gases and steam. The published list includes 40063V01-F6, 40063V01-F1, 25063V01-F6, 20050V01-F1 and 12050V01-F1 with an NC designation. The normally closed configuration is part of the process function.
It is reviewed with the operating conditions of the selected version rather than treated as proof that every listed valve suits every fluid duty.
Procurement review includes the mechanical connection, space for the operating section and access to items requiring attention. A shared application description does not prove the same passage size or connection. These details are checked for the selected catalogue item.
When a component inside the valve is requested, its relationship to the complete installed configuration is verified separately from procurement of an entire valve.
Actuators and position control
The manufacturer document library identifies EHF electro-hydraulic actuators and RTX 5 smart positioners. An automated valve project considers these devices as elements of an assembly. Mechanical coupling must match the valve and position control must coordinate with the actuator.
Project scope defines whether a single device or a combined package is required, allowing procurement to address the actual installation boundary.
Actuator replacement compares the installed valve connection and required movement. A positioner assessment also concerns the mechanical feedback arrangement. The quotation separates the device from mounting accessories so the series name does not conceal differences in the delivery package.
Documentation for the specific configuration supports final technical agreement and the subsequent check of the supplied assembly.
ROTEX Automation and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of ROTEX Automation and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Festo
- Equipment and parts for SMC
- Equipment and parts for Bürkert
- Equipment and parts for ASCO
