Hutchinson Paulstra anti-vibration mounts, couplings & seals
Export selection of Hutchinson Paulstra elastomeric and all-metal anti-vibration mounts, flexible couplings, rubber-metal bushes, dynamic shaft seals and Strasonic acoustic foams.
Radiaflex elastomeric mounts & stops
Cylindrical and conical rubber-metal Radiaflex mounts isolate vibration and shock on pumps, fans and machine tools. Series 520 and 521 cover flexible studs, stainless steel versions and progressive stops 511 and 513. Eight mounting options exist.
- Series 520*** and 521***
- 8 fastening configurations
- Radiaflex Inox versions
- Conical stops 511 / 513
Paulstradyn, Evidgom & Stabiflex mounts
Paulstradyn mounts (533701–533719) reach around 85% vibration attenuation at 7.4 mm deflection under 240 daN load. Evidgom conical mounts (810002–810784) operate at 2.5 to 7 Hz natural frequency. Stabiflex 530603–530652 adds a protective shroud.
- Paulstradyn 533701–533719
- Evidgom 2.5–7 Hz range
- Stabiflex 530603–530652
- Protective shroud option
Nivofix & Minifix leveling mounts
Machine feet Nivofix (530810–530850) and Minifix (530801–530807) combine a leveling screw with a nitrile rubber anti-slip ridged base. They dampen high-frequency vibrations on machine tools and presses. Galvanized shrouds resist coolant.
- Nivofix 530810–530850
- Minifix 530801–530807
- Nitrile rubber base
- Leveling adjustment screw
Vibrachoc all-metal & Vibcable mounts
Vibrachoc all-metal mounts and Vibcable wire-rope isolators (V3CA8010–V3CA8140) use a compressed woven stainless steel wire cushion. They endure high temperatures, oils and corrosive media where rubber degrades. Ranges cover V43–V47 and Vibsol.
- Woven stainless steel cushion
- Vibcable V3CA8010–V3CA8140
- Series V43–V47, V118, V318
- Oil and heat resistant
Juboflex, Miniflex & MPP couplings
Juboflex flexible couplings (632017–632320) use a pre-compressed rubber element rated from 40 to 1,200 N·m nominal torque and up to 3,600 N·m peak torque. Maximum speed reaches 5,000 rpm. Compact drives use Miniflex and MPP (633010–633055).
- Juboflex 40–1,200 N·m
- Peak torque up to 3,600 N·m
- Speeds up to 5,000 rpm
- Compact Miniflex & MPP
Straflex, Cardaflex & Axoflex couplings
Straflex couplings (635100–635637) combine a hexagonal rubber element with rayon-linked metallic bobbins and forged steel flanges. Across the Paulstra coupling range, torque spans 2.5 to 100,000 N·m. Cardaflex, Axoflex and RTP complete the range.
- Straflex 635100–635637
- Forged steel flanges
- Range 2.5 to 100,000 N·m
- Cardaflex, Axoflex & RTP
Flexibloc & Silentbloc flexible bushes
Fully bonded Flexibloc bushes (560***–568***) and prestressed Silentbloc bushes (861***–867***) with Adhérite elastomer replace mechanical bearings in oscillating joints. They absorb radial, axial and torsional loads without lubrication.
- Flexibloc 560***–568***
- Silentbloc 861***–867***
- Maintenance-free elastomer
- Oscillating joint isolation
Dynamic shaft seals & Strasonic foams
Dynamic seals for rotating shafts (72/77/79****) and sliding shafts (71****) span over 2,000 references across elastomer compounds and lip profiles. Strasonic acoustic foams (841000–841012) use polyurethane and cellular rubber to cut noise.
- Over 2,000 seal references
- Rotating seals 72/77/79****
- Sliding seals 710***–714***
- Strasonic foams 841000–841012
Engineering selection of Hutchinson Paulstra mounts and couplings
Paulstra manufactures more than 3,000 references across five product lines: Radiaflex, Paulstradyn, Evidgom, Stabiflex and Nivofix elastomeric mounts, Vibrachoc and Vibcable all-metal isolators, Flexibloc and Silentbloc bushes, flexible couplings (2.5 to 100,000 N·m) and over 2,000 dynamic shaft seals.
Engineers can model transmissibility, natural frequency and shock response using Paulstrasoft desktop and mobile preselection tools.
Materials for oils, coolants and high-temperature service
Stabiflex mounts with protective shrouds, nitrile-base Nivofix leveling feet and stainless steel Radiaflex Inox and Paulstradyn Inox units handle machine coolants, oils and outdoor exposure.
In extreme thermal or chemical conditions, Vibrachoc mounts with compressed stainless steel wire cushions and Vibcable wire-rope isolators replace rubber elements, while Strasonic foams attenuate airborne noise.
Hutchinson Paulstra and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Hutchinson Paulstra and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Flender
- Equipment and parts for HV Hydraulic
- Equipment and parts for Halberg Maschinenbau
- Equipment and parts for HUBTEX
Documents and sources
- About Hutchinson Paulstra — history since 1934 and five product lines
- Paulstra industry catalog — mounts, bushes, couplings and seals (PDF)
- Hutchinson Paulstra technical data sheets — mounts, couplings and Strasonic
- Hutchinson Paulstra brochures — Radiaflex range (8 fastening types) and stainless steel series
- Anti-vibration solutions for pumps — Radiaflex, Paulstradyn, Juboflex and Straflex
- Paulstrasoft desktop and mobile app for anti-vibration mount preselection
