UNIMEC S.p.A. Mechanical Screw Jacks, Bevel Gearboxes and Speed Modulators
UNIMEC S.p.A. (Usmate Velate, Italy) industrial transmission assemblies: TP/TPR trapezoidal and Series K ball screw jacks, Aleph technopolymer units, AISI 316 Series X lines, Gleason spiral bevel gearboxes, modulators, and disc couplings.
Trapezoidal Screw Jacks TP and TPR
UNIMEC TP (translating screw) and TPR (rotating screw) trapezoidal screw jacks cover 14 standard sizes from 183 to 25022 with inherent mechanical irreversibility. Dual-action DA models reach 55,000 lbs. Service parts include spindles, nuts, seals, and bellows.
- TP translating and TPR rotating screw
- 14 standard sizes: 183 to 25022
- Up to 55,000 lbs in DA version
- Parts: spindles, nuts, seals, bellows
Series K Ball Screw Jacks
UNIMEC Series K ball screw jacks in sizes 59, 88, and 117 target high-speed positioning and intensive duty cycles. Because the transmission is reversible, drives require external brakes or locking units. Service parts cover ball screw assemblies, bearings, oil seals, and flanges.
- Series K standard sizes: 59, 88, 117
- Reversible ball screw requires brake
- Hollow shaft and oil-bath sealing
- Parts: ball screws, bearings, seals
Aleph Technopolymer Screw Jacks
The Aleph series delivers compact trapezoidal screw jacks in sizes 420, 630, and 740 across TP and TPR layouts. Molded polyarylamide gear elements paired with metal parts retain self-locking and often run oil-free. Replaceable parts include screws, nuts, bushings, and covers.
- Aleph series sizes: 420, 630, 740
- TP and TPR self-locking layouts
- Polyarylamide and metal construction
- Parts: screws, nuts, bushings, boots
Stainless Steel Screw Jacks XTP and XTPR
UNIMEC X Series stainless steel screw jacks (XTP and XTPR) span sizes 204, 306, and 407 for washdown and marine lines. Housings, nuts, covers, flanges, and screws use AISI 316 steel, with optional Niploy worm plating. Service parts include screws, nuts, flanges, and seals.
- X Series sizes: 204, 306, and 407
- AISI 316 housings, screws, and nuts
- Optional Niploy nickel worm plating
- Parts: screws, nuts, flanges, seals
Bevel Gearboxes RA–RP and ATEX
UNIMEC cubic bevel gearboxes span 9 standard sizes (54 to 500) with Gleason spiral bevel gears and standard ratios up to 1/12. Configurations RA through RP accept IEC, brushless, or pneumatic motors, plus ATEX options. Service parts include gear sets, shafts, bearings, and seals.
- 9 standard sizes: 54 up to 500
- Gleason spiral gears, ratios to 1/12
- RA–RP layouts and ATEX Edition
- Parts: bevel sets, shafts, seals
Series X Stainless Steel Bevel Gearboxes
UNIMEC Series X stainless steel bevel gearboxes cover sizes 54, 86, 110, and 134 for food and marine lines. Housings, hubs, covers, motor flanges, and solid or hollow shafts are machined from AISI 316 blanks. Service parts include shafts, hubs, covers, and lip seals.
- Series X sizes: 54, 86, 110, 134
- AISI 316 housings, hubs, and shafts
- Solid or hollow shaft XRA–XRP layouts
- Parts: shafts, covers, flanges, seals
Mechanical Speed Modulators
UNIMEC mechanical speed modulators use a planetary gearset with a correction worm screw to adjust output phase while machinery runs. The catalog covers 3 versions, 5 models, and 85 construction forms for packaging and winding lines. Service parts include worm screws, gears, and seals.
- Planetary stage plus correction worm
- 3 versions, 5 models, 85 layouts
- Live speed and phase synchronization
- Parts: worm screws, gears, seals
Couplings, Shafts and Proprietary Lubricants
UNIMEC steel disc couplings deliver zero backlash and ±1° angular alignment alongside balanced shafts and torque limiters. Lubrication maintenance relies on Mark CA semi-fluid grease and ATIR SH 150 oil. Service parts include disc packs, Nova 125 kits (KL1–KL5), CUN0125, and B0R0500.
- Steel disc couplings up to ±1° offset
- Mark CA grease and ATIR SH 150 oil
- Nova 125 auto-lubricators KL1–KL5
- Codes: TGM0125, CUN0125, B0R0500
Selecting Between Self-Locking TP/TPR and High-Duty Series K
UNIMEC trapezoidal screw jacks (TP translating screw and TPR rotating screw across sizes 183 to 25022) provide inherent irreversibility to hold loads without external brakes. Dual-action DA designs drive two opposing nuts up to 55,000 lbs.
Series K ball screw jacks (sizes 59, 88, and 117) target high-speed positioning and intensive duty cycles; because they are reversible, drives must incorporate brake motors or locking mechanisms.
For light loads requiring minimal maintenance, polyarylamide Aleph jacks (420, 630, 740) run oil-free in many setups.
Multi-Axis Synchronization, Series X AISI 316 and Plant Heritage
Multiple screw jacks are mechanically synchronized through cubic bevel gearboxes (sizes 54 to 500 with Gleason spiral gears and ratios up to 1/12), high-torsional-stiffness steel disc couplings (±1°), and balanced transmission shafts.
Mechanical speed modulators (3 versions, 5 models, 85 forms) adjust phase without stopping machinery.
For washdown, food, and marine plants, XTP/XTPR jacks and Series X bevel gearboxes (54–134) use AISI 316 steel with optional Niploy worm plating, alongside ATEX bevel gearboxes.
Founded in 1981 in Usmate Velate (Milan), UNIMEC S.p.A. produces over 80% of components in-house, including 8,000 mm custom vertical-lathe spindles.
UNIMEC S.p.A. and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of UNIMEC S.p.A. and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Flender
- Equipment and parts for UNIOELER / L.+G. Beck
- Equipment and parts for HV Hydraulic
- Equipment and parts for HUBTEX
Documents and sources
- UNIMEC S.p.A. — Company Profile and Manufacturing
- UNIMEC Trapezoidal Screw Jacks (TP / TPR)
- UNIMEC Stainless Steel Trapezoidal Screw Jacks (Series X)
- UNIMEC Technopolymer Screw Jacks (Aleph Series)
- UNIMEC Ball Screw Jacks (Series K)
- UNIMEC Bevel Gearboxes (RA–RP and ATEX)
- UNIMEC Series X Stainless Steel Bevel Gearboxes
- UNIMEC Mechanical Speed Modulators
- UNIMEC Couplings and Transmission Shafts
- UNIMEC Proprietary Lubricants (Mark CA, ATIR SH 150, Nova 125)
- UNIMEC Industrial Solutions and Custom Screw Jacks
