Henan Bailing Machinery (Bailing Machinery) Mining & Mineral Processing Equipment

Selection of Henan Bailing Machinery (Bailing Machinery) PE/PEX jaw crushers, HST/HPT cone crushers, PF impactors, Phi 900-5030 ball mills, YK screens, FLG/FX classifiers, SF/XJ/JJF/KYF flotation cells, magnetic separators, and leaching lines.

PE & PEX Series Jaw Crushers

Henan Bailing Machinery (Bailing Machinery) PE and PEX jaw crushers handle ores up to 320 MPa compressive strength with feed sizes up to 1200-1500 mm and capacities up to 1000-2200 t/h. Built for granite, basalt, iron, and gold ores. Jaw plates and shafts are supported.

  • Models: PE-150x250 to PE-1600x2100, PEX-150x750 to PEX-300x1300
  • Throughput: 1-1000 t/h standard (up to 2200 t/h on PE-1600x2100)
  • Feed & power: max feed <=1200-1500 mm, motors 5.5-380 kW
  • Wear parts: high-Mn jaw & cheek plates, gray iron toggle plates, shafts

HST & HPT Hydraulic Cone Crushers

Bailing Machinery HST100-HST750 single-cylinder and HPT200-HPT500 multi-cylinder cone crushers run secondary and fine lamination crushing. Positive-pressure sealing keeps dust out of oil. Replacement cone mantles, bowl liners, bushings, and seals are available.

  • HST series: HST100-HST750, max feed <=500 mm, 120-1200 t/h
  • HPT series: HPT200-HPT500, max feed <=326 mm (335 mm HPT500), 81-1100 t/h
  • Applications: basalt, granite, quartz sand, iron, gold, copper ores
  • Spares: cone mantles, concave bowl liners, eccentric bushings, seals

PF Series Impact Crushers

Henan Bailing Machinery PF-0607 to PF-1320 impact crushers handle limestone, granite, basalt, and iron ore up to 500 mm and 350 MPa at 10-350 t/h. Hinged ratchet frame covers allow safe rotor access. Symmetric high-chromium cast iron blow bars and zigzag impact liners are replaceable.

  • Models: PF-0607, PF-1008, PF-1010, PF-1210, PF-1214, PF-1315, PF-1320
  • Ratings: max feed <=500 mm, <=350 MPa rock, 10-350 t/h, 30-375 kW
  • Materials: river pebbles, limestone, granite, basalt, diabase, coal
  • Spares: high-Cr blow bars, zigzag impact liners, rotor discs, bearings

Energy-Saving Ball Mills (Phi 900 to Phi 5030)

Bailing Machinery ball mills span 31 sizes from Phi 900x1800 to Phi 5030x6400 for <=25 mm ore grinding to 0.074-0.4 mm. Double-row self-aligning bearings cut energy by 30% and lift capacity 15-20%. High-Mn liners, grates, grinding heads, and steel balls are supplied.

  • Range: Phi 900x1800 (18.5 kW, 0.65-2 t/h) to Phi 5030x6400 (2500 kW, 68-386 t/h)
  • Feed & fineness: <=25 mm feed size, 0.074-0.89 mm discharge size
  • Design: grease-lubricated double-row bearings (-30% energy, +15-20% output)
  • Spares: high-Mn shell liners, partition plates, discharge grates, balls

YK Series Circular Vibrating Screens

Henan Bailing Machinery YK1237 to YK2460 screens (1-4 decks) classify ores up to 400 mm at 25-900 m3/h and 970 r/min. External block eccentric exciters, flexible couplings, and synchronous belts ease maintenance. Polyurethane screens and exciters are available.

  • Models: YK1237 to YK2460 (1-4 decks, 4.4-14.4 m2 screen area)
  • Specs: feed <=400 mm, 25-900 m3/h, 970 r/min, 8 mm double amplitude
  • Drive: external block eccentric exciter, synchronous belt, 11-45 kW
  • Spares: polyurethane screen panels, wire meshes, exciters, belts

FLG Spiral Classifiers & FX Hydrocyclones

Bailing Machinery FLG-508 to 2FLG-2000 spiral classifiers (32-800 t/d overflow) and FX-125 to FX-500 hydrocyclones (3.1-220 t/h, 20 deg cone) close grinding circuits and deslime pulp. Three-piece oil seals protect shafts. Spiral blades and cyclone liners are supplied.

  • Classifiers: FLG-508 to FLG-2000 and twin-spiral 2FLG-1200 to 2FLG-2000
  • Hydrocyclones: FX-125 to FX-500, 3.1-220 t/h, 20-120 um overflow, 57-718 kg
  • Modes: closed-circuit classification, desliming, dewatering, ore washing
  • Spares: wear-resistant spiral blades, 3-piece oil seals, apex & vortex parts

SF, XJ, JJF & KYF Flotation Machines

Henan Bailing Machinery builds SF (0.13-20 m3), XJ/XJK (0.13-5.8 m3), JJF (4-20 m3), and KYF aerated cells (1-38 m3) for gold, copper, lead-zinc, molybdenum, fluorite, and talc ores. Ground-rubber impellers extend wear life. Impellers, stators, and scrapers are supplied.

  • Self-aspirating: SF (0.05-20 t/h), XJ (5-8 mm stator gap), JJF (2-20 m3/min)
  • Air-forced KYF: 1-38 m3 catalog cells, U-shaped tank (-30-50% power)
  • Ores: gold, copper, molybdenum, lead-zinc, iron, fluorite, talc, quartz
  • Spares: rubber-lined impellers, stators, hollow shafts, air distributors

Magnetic, Gravity Separation & Gold Leaching Lines

Bailing Machinery builds vertical-ring (4-80 t/h) and drum magnetic separators (10-300 t/h), 6S shaking tables (15-108 t/d), gold concentrators (3-100 t/h), leaching tanks (6-395 m3), and desorption-electrolysis sets (0.4 MPa). Slurry pump and tank impellers are supported.

  • Magnetic: vertical-ring HGMS (4-80 t/h), drum (10-300 t/h), slurry (15-140 m3/h)
  • Gravity: 6S shaking tables (1012 kg), spiral chutes, jigs (6-40 t/h), gold bowls
  • Gold recovery: leaching tanks (6-98 m3 effective), electrolysis (>=3.5 kg/t)
  • Spares: slurry pump impellers, leaching impellers, shaking decks, diaphragms

Crushing, Screening & Grinding Circuit Selection

Henan Bailing Machinery (Bailing Machinery) builds full comminution circuits spanning PE/PEX primary jaw crushers (<=1200-1500 mm feed, up to 320 MPa), HST single-cylinder and HPT multi-cylinder hydraulic cone crushers, and PF impact crushers (up to 350 MPa).

Downstream grinding and classification combine Phi 900x1800 to Phi 5030x6400 ball mills (-30% bearing energy consumption), YK 1-4 deck circular vibrating screens, FLG spiral classifiers, and FX hydrocyclones.

Flotation, Magnetic, Gravity & Gold Recovery Systems

Mineral separation lines integrate SF, XJ/XJK, JJF, and KYF flotation cells alongside vertical-ring high-gradient (4-80 t/h) and drum magnetic separators (10-300 t/h), 6S shaking tables, spiral chutes, jigging machines, and centrifugal gold concentrators.

Gold cyanidation plants pair 6-395 m3 double-impeller leaching tanks with >=3.5 kg/t desorption-electrolysis equipment operating at 0.4 +/- 0.02 MPa.

Wear Parts Provisioning & Project Engineering

Each equipment package can be specified with high-manganese jaw plates, cone liners, ball mill liners and steel balls, polyurethane screen panels, flotation rubber impellers, and slurry pump impellers matched to ore abrasiveness.

Henan Bailing Machinery and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Henan Bailing Machinery and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.