Wakefield Thermal / Wakefield-Vette Cooling Hardware & Enclosures

Extruded and board-level heat sinks, 180 series liquid cold plates, copper heat pipes, VC vapor chambers, TEMA thermoelectric assemblies, and Ripac subracks from Wakefield Thermal / Wakefield-Vette (USA).

Extruded Flatback Heat Sinks

Wakefield Thermal and Wakefield-Vette 125295–125643 aluminum extrusions cool power electronics under natural or forced air. Standard profiles 16079, 11201, 9099, 16304, and 13694 ship in 12 in. and 36 in. lengths. Selection relies on 3-inch natural convection thermal resistance.

  • Profiles: 16079, 9099, 16304, 13694
  • Widths: 1.625 to 6.961 inches
  • Lengths: 12 in. and 36 in. bars
  • Rating: 0.8–3.2 °C/W per 3" length

Board-Level & SMT Heat Sinks

Wakefield Thermal and Wakefield-Vette 626, 627, 637, and 667 black-anodized heat sinks mount vertically with wave-solderable pins on 1 in. centers. Copper matte-tin 217 and 218 series cool TO-263 packages. Compact 292-AB fits TO-92 devices, while 330SC and 285SC clips speed assembly.

  • Vertical pins: 626, 627, 637, 667
  • SMT TO-263: copper 217 & 218 series
  • SpeedClip™ retainers: 330SC, 285SC
  • 637 series: 4.2–5.8 °C/W @ 200 LFM

DC/DC Converter Heat Sinks

Wakefield Thermal and Wakefield-Vette cover Full-Brick (557–559), Half-Brick (517–528), Quarter-Brick (537, 547), and Eighth-Brick (567–569) power modules. Units match Artesyn, TDK, muRata, and Ericsson footprints. Series 100, 103, and 107 hardware kits support field replacement.

  • Full-Brick: 557, 558, 559 series
  • Half/Quarter: 517–528, 537, 547
  • Eighth-Brick 567: 2.2–7.2 °C/W @ 300 LFM
  • Mounting kits: 100, 103, 107 series

Liquid Cold Plates (180 Series)

Wakefield Thermal and Wakefield-Vette 180-10, 180-11, 180-12, and 180-20 cold plates cool rectifiers, power diodes, and IGBTs. Extruded aluminum plates hold continuous copper or custom stainless steel tubing. Models offer single-side and double-side mounting surfaces.

  • Series: 180-10, 180-11, 180-12, 180-20
  • Resistance: 0.009–0.084 °C/W overall
  • Rated flow: 1.0–1.5 GPM water loop
  • Lengths: 6, 12, and 24 inch bodies

Heat Pipes & Vapor Chambers

Wakefield Thermal and Wakefield-Vette two-phase copper heat pipes transfer thermal loads to remote fin arrays with minimal drop. Grooved, bendable woven-mesh, and orientation-free sintered powder wicks fit tight layouts. Copper VC series vapor chambers spread high-flux hot spots across 2D planes.

  • Wicks: sintered, mesh, and grooved
  • Vapor chambers: VC-90-90-3, VC-106-70-3
  • Sintered pipes: 360° mounting freedom
  • Standard parts: VC-1131-8175-517, VC-106-82-3

Thermoelectric Assemblies (TEMA)

Wakefield Thermal and Wakefield-Vette TEMA series thermoelectric assemblies provide refrigerant-free cooling and heating for enclosures and instruments. Air-to-air (TEMA-AA-50) and air-to-plate (TEMA-AP-40/80) units run on 12 or 24 VDC. Solid-state modules mount in any orientation.

  • Air-to-air: TEMA-AA-50-12 / -24 (50W)
  • Air-to-plate: TEMA-AP-40-12 / 80-24
  • Ambient range: -20 °C to +60 °C
  • Service lifetime: >70,000 hours

Hydro-Air Heat Exchangers

Wakefield Thermal and Wakefield-Vette Hydro-Air 124984 liquid-to-air heat exchangers reject heat from closed-loop cooling circuits. A copper fin-and-tube core rated at 18 FPI pairs with a 152 mm fan. Its 241×208×66 mm footprint fits compact industrial power cabinets.

  • Model: Hydro-Air 124984 core unit
  • Matrix: copper tube/fin at 18 FPI
  • Dimensions: 241 × 208 × 66 mm
  • Fan assembly: 1 × 152 mm unit

Subracks, Enclosures & Wedgelocks

Wakefield Thermal and Wakefield-Vette build Ripac subracks (IEC 60297-3), HeiBox/RiBox/ATR housings, CNC heat frames, and VME/VPX/cPCI panels. Field spares include PMC-GASKET-01 and FMC-GASKET-01 EMC rings plus 6063-T6 aluminum wedgelocks (418B–426B, 422C–438C, Wavelock).

  • Subracks: Ripac Compact, Easy, Eco, Vario
  • Wedgelocks: 418B–426B, 422C–438C, 422D
  • Spare EMC gaskets: PMC & FMC-GASKET-01
  • 422C screw torque: 6 in-lbs (68 N-cm)

Thermal Architecture & Cooling Method Selection

Wakefield Thermal (formerly Wakefield-Vette) manufactures thermal management hardware in the USA for power electronics, industrial drives, telecom, and embedded computing.

Moderate thermal loads use 125295–125643 extruded flatbacks, 626/627/637/667 board-level sinks, 217/218 SMT copper sinks, and 517–569 DC/DC converter sinks.

High-flux IGBT, rectifier, and laser modules rely on 180-10/11/12/20 liquid cold plates (0.009–0.084 °C/W at 1.0–1.5 GPM), Hydro-Air 124984 liquid-to-air heat exchangers, sintered or mesh copper heat pipes, and VC series copper vapor chambers.

Thermoelectric Enclosures & Rugged Packaging Standards

TEMA-AA-50-12/24 air-to-air and TEMA-AP-40-12/80-24 air-to-plate thermoelectric cooler assemblies regulate enclosure temperatures across -20 °C to +60 °C ambient conditions on 12/24 VDC without refrigerants and with >70,000-hour solid-state service life.

Electronic packaging covers Ripac subracks (IEC 60297-3), HeiBox, RiBox, and ATR shielded housings, CNC aluminum heat frames, VITA/IEEE 1101.10 front panels, spare PMC/FMC EMC gaskets, and 6063-T6 aluminum B/C/D-style wedgelocks.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.