3E Makina HVAC Duct Machinery & Spare Parts
Export sourcing of Turkish 3E Makina auto duct lines, CNC plasma cutting tables, flange spot welders, lockformers, spiral duct machines and spare parts.
KKM-01 to KKM-04 Automatic Rectangular Duct Lines
3E Makina KKM-01 to KKM-04 lines process 0.50–2.0 mm galvanized coils up to 1000 m2 per 10-hour shift. Hydraulic notching on KKM-04 and 3-coil feeding on KKM-03 form Pittsburgh, Snaplock and Nulock seams. Replaceable parts include forming rolls, shear blades, hydraulic seals and servo drives.
- Models: KKM-01, KKM-02, KKM-03 (2950 kg), KKM-04 (4 dies)
- Capacity: 0.50–2.0 mm galvanized, 0.5–1.2 mm stainless steel
- Drive: 2.2 kW servo motor, PLC control, 2 beading units
- Spares: forming rollers, blades, hydraulic cylinders, sensors
PLZ-01 CNC Plasma Cutting Table & PSB Sheet Feeders
The PLZ-01 CNC plasma table (1500x3000 mm) cuts galvanized, DKP, aluminum and stainless sheets up to 5–6 mm at 7–9 m/min. Built with Hiwin rails, Leadshine drives and CAMduct/Lantek support, it pairs with PSB-01/02 feeders. Nozzles, electrodes and motors are supported.
- PLZ-01: 1500x3000 mm area, 11 kW, 7 bar / 189 L/min air
- Motion: Leadshine stepper drives, Hiwin rails, 20 m/min rapid
- Feeders: PSB-01 (1.1 kW, 800 mm), PSB-02 (2.2 kW, 1220 mm)
- Spares: plasma nozzles, electrodes, linear blocks, Z-axis valves
PNT-01 / PNT-02 Spot Welders & M-1 / M-2 / M-3 Chillers
PNT-01 (15 kW) and PNT-02 flange spot welders (45 kW, 380V) join galvanized, DKP and stainless sheets. Water-cooled copper arms with 5 cm travel pair with M-1, M-2 and M-3 active compressor chillers using R407. Replaceable items include electrodes, copper arms, valves and pumps.
- Welders: PNT-01 (15 kW, 155 kg), PNT-02 (45 kW, microprocessor)
- Chillers: M-2 (1300 kcal/h, 10 L), M-3 (2500 kcal/h, R407)
- Cooling pump: 24V DC brushless 20 L/min (M-2), 150 W (M-3)
- Spares: copper electrodes, arms, 24VDC pneumatic valves, pumps
YKM-01 Spiral Duct, YDM-01 Elbow, BKEM-01 & KYM-01 Machines
The YKM-01 (10.5 kW) forms spiral ducts of Ø100–1250 mm (250–6000 mm cut), while YDM-01 (4 kW) forms elbows of Ø125–1250 mm from 0.5–1.5 mm sheet. BKEM-01 seam closers and KYM-01 transition units use 2379 steel tooling. Forming rolls, knives and seals are replaceable.
- YKM-01: Ø100–1250 mm, 10.5 kW, 1950 kg, 6–8 bar air
- YDM-01: Ø125–1250 mm, 0.5–1.5 mm sheet, 90 L hydraulic tank
- BKEM-01 & KYM-01: Ø150–1000 mm seam pressing, 90–120 psi
- Spares: 2379 tool steel rolls and tips, seals, PLC touchscreens
KNT-01/02 Lockformers, FM-01 TDF Flange, SNT-01, SC-01, KDK-01 & CPM-01
KNT-01/02 lockformers (8–9 stations, 6 m/min) and the 14-station FM-01 form locks and 20/25/35 mm TDF flanges on 0.50–1.50 mm sheet. Supporting units include SNT-01 (Mitsubishi drive, Schneider protection), SC-01, KDK-01 (15 m/min), FKM-01 and CPM-01. Rollers, chains and blades are supported.
- FM-01: 14 stations, 20/25/35 mm TDF flange, 0.50–1.00 mm sheet
- KNT-01/02 & KDK-01: 6 m/min lockforming, 15 m/min seam closing
- SNT-01 & CPM-01: Mitsubishi inverter, 2379 rolls, diamond saw
- Spares: 2379 steel roller sets, triple drive chains, saw blades
RA-01 Decoilers, BKM-01 Cut-to-Length, GYT-02 Shears, CKM Folders & SLN/İZ
The RA-01 decoiler (5 t, 1300 mm) and BKM-01 line (2 kW servo, 3 mm galv) feed GYT-02 guillotines (1050 mm Böhler knives) and CKM-01..03 / PCM-01 folders. SLN-01..03 roll benders and İZ / W İZ beading units cover 0.4–2.5 mm sheets. Böhler/2379 blades, bending bars, bearings and brakes are supported.
- RA-01 & BKM-01: 5 t / 1300 mm coil, 3 mm galv / 1.5 mm stainless
- GYT-02 & CKM-01..03: 1050 mm Böhler knives, 2000–3000 mm bend to 135°
- SLN-01..03 & İZ / W İZ: rolling to 2.5 mm, beading 0.40–1.20 mm
- Spares: Böhler & 2379 knives, bending blades, bearings, brake pads
Rectangular & Spiral HVAC Duct Manufacturing Workflow with 3E Makina
Established in Istanbul in 2011, 3E Makina engineers complete sheet metal machinery lines for rectangular and round ventilation ducts.
Coil-fed KKM-01, KKM-02, KKM-03 (three-coil entry) and KKM-04 (four hydraulic notching dies) process 0.50–2.0 mm galvanized and 0.5–1.2 mm stainless steel into finished duct blanks at up to 1000 m2 per 10-hour shift.
Seam closing and flanging are handled by SC-01, KDK-01 (up to 15 m/min), 14-station TDF rollformer FM-01 (20/25/35 mm profiles), lockformers KNT-01/02 and Mitsubishi-driven flanger SNT-01.
For round ducts and elbows from Ø100 to 1250 mm, YKM-01 and YDM-01 feature 2379 tool-steel forming rolls and burr-free cutting units.
CNC Plasma Cutting, Spot Welding & Sheet Preparation Architecture
Custom HVAC fittings and transitions are cut on the PLZ-01 CNC plasma table (1500x3000 mm working area, Hiwin linear rails, Leadshine stepper drives, Autodesk Fabrication CAMduct and Lantek compatibility) paired with PSB-01/02 coil feeders.
Flange fastening uses PNT-01 (15 kW) and PNT-02 (45 kW, water-cooled copper arms with 5 cm travel) supported by M-1, M-2 (1300 kcal/h) and M-3 (2500 kcal/h, R407) compressor chillers.
Sheet prep includes the 5-ton RA-01 decoiler, BKM-01 servo cut-to-length line, GYT-02 shears with 1050 mm Böhler knives, CKM folders and İZ / W İZ beading machines.
3E Makina and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of 3E Makina and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for HAGE Sondermaschinenbau
- Equipment and parts for HAFNER Pneumatik
- Equipment and parts for HIRZT
- Equipment and parts for 3D Systems
Documents and sources
- About 3E Makina (founded 2011, Istanbul)
- 3E Makina factory and office contacts
- KKM-01 / KKM-02 Automatic Square Duct Lines
- KKM-04 Notching Square Duct Line
- KKM-03 Three-Coil Square Duct Line
- PLZ-01 CNC Plasma Cutting Machine
- PSB-01 / PSB-02 Plasma Sheet Feeding Machines
- PNT-02 45 kW Flange Spot Welding Machine
- M-3 Industrial Welding Chiller Unit
- YKM-01 Spiral Round Duct Machine
- YDM-01 Round Elbow Forming Machine
- KNT-01 / KNT-02 Lockforming Machines
- FM-01 TDF Flange Rollforming Machine
- KDK-01 Square Elbow Seam Closer
- SNT-01 Pittsburgh Male Flanger
- RA-01 5-Ton Sheet Metal Decoiler
- BKM-01 Servo Cut-to-Length Line
- GYT-02 Guillotine Shears
- CKM Series Sheet Bending Folders
- İZ-01 / İZ-02 / İZ-03 Z-Beading Machines
