Schleuniger Cut and Strip Machines and Crimp Presses

Schleuniger (Thun, Switzerland, since 1975, Komax Group): EcoStrip, MultiStrip, PowerStrip and MegaStrip cut and strip machines, EcoCut and PowerCut cutters, Strip Series strippers, crimp presses, PullTester.

EcoStrip, E300 and E400 Cut and Strip Machines

EcoStrip 9380 is the entry-level cut and strip machine for wires of 0.3–8.0 mm in diameter. Cut & Strip Family E300 cuts and strips wire, tubing, ribbon and multiconductor cable of 0.3–8.0 mm, while E400 covers 0.8–12.5 mm with 0.14–16 mm² cross sections. E300 has a 10-inch touchscreen.

  • EcoStrip 9380: wires 0.3–8.0 mm
  • E300 family: cable 0.3–8.0 mm
  • E400 family: cable 0.8–12.5 mm
  • E400 cross section: 0.14–16 mm²

MultiStrip and PowerStrip Modular Machines

MultiStrip 9480 comes in six machine versions for wires of 0.5–12.5 mm, each with its own cutting unit. PowerStrip 9580 processes wires of 0.5–16 mm in diameter and 0.5–70 mm² in cross section with a transport speed of up to 4 m/s. SmartBlade cartridge sets are changed without tools.

  • MultiStrip 9480: six versions
  • MultiStrip 9480: wires 0.5–12.5 mm
  • PowerStrip 9580: 0.5–70 mm²
  • PowerStrip 9580 feed: up to 4 m/s

MegaStrip 9680 for Heavy Cables

MegaStrip 9680 cuts and strips wire, multiconductor and shielded cables up to 35 mm in diameter. Cross sections reach 120 mm², or 300 mm² as an option. The axes are driven by servomotors with encoder monitoring to detect blockages; the cutting unit uses SmartDetect quality monitoring.

  • MegaStrip 9680: cables up to 35 mm
  • MegaStrip 9680: up to 120 mm²
  • Optional cross section: 300 mm²
  • Stripping control: SmartDetect

EcoCut and PowerCut Cutting Machines

EcoCut 3200 takes a tube cutting head for tubes up to Ø 12.7 mm or a universal head for wire, cable and tubes up to Ø 10 mm. EcoCut 3300 cuts wire, cable and tubing up to 16 mm² and flat material up to 100 mm. PowerCut 3700 cuts cable up to 70 mm² in cross section and 25 mm in diameter.

  • EcoCut 3200: tubes up to Ø 12.7 mm
  • EcoCut 3300: flat material to 100 mm
  • PowerCut 3700: up to 70 mm²
  • PowerCut 3700 feed rate: 4.5 m/s

Strip Series and JacketStrip Strippers

The portable B300 strips cables of 0.03–8 mm² and comes as Core, Plus, Pro and Ultra; the ACD option detects incisions in the conductor. B440 strips coaxial, single-conductor and multiconductor cables of 0.05–40 mm². JacketStrip 8310 slits the jackets of 2.5–25 mm cables.

  • Strip Series B300: 0.03–8 mm²
  • Strip Series B440: 0.05–40 mm²
  • B440 strip length: up to 50 mm
  • JacketStrip 8310: cable 2.5–25 mm

UniCrimp, StripCrimp and CT Crimp Presses

UniCrimp 208 crimps rear-feed and side-feed banded terminals on 0.05–6 mm² wires with 33 kN of force. StripCrimp 208 strips 0.5–15 mm and then crimps. CT presses for loose-piece terminals range from the CT 15 at 15 kN to the hydraulic CT 150 at up to 150 kN.

  • UniCrimp 208: 33 kN force
  • StripCrimp 208: strip 0.5–15 mm
  • CT 60 press: up to 60 kN
  • Hydraulic CT 150: up to 150 kN

Crimp Quality: PullTester, CHM, ACO 08

Benchtop PullTester devices measure pull-off forces of crimped and welded joints: PullTester 20 up to 500 N, PullTester 27 at 2,000 and 5,000 N, optionally up to 10,000 N. The CHM measures crimp height with a spring-loaded pin. The ACO 08 monitor fits Schleuniger benchtop crimping presses.

  • PullTester 20: up to 500 N
  • PullTester 27: up to 10,000 N option
  • PullTester 325: three ranges
  • Device link: WinCrimp software

Peripherals: Prefeeding, Coiling, Stacking

PreFeeder 2500 is an active dereeler for wire, small cables and tubing up to 12 mm in diameter. CableCoiler 1300 coils round cables up to 12 mm on two synchronized units, coils up to 10 kg. WireStacker 3150 stacks cables axially, and WireStacker 1000 takes lengths up to 3 m.

  • PreFeeder 2500: wire up to 12 mm
  • CableCoiler 1300: coils up to 10 kg
  • CableCoiler 1300: cable up to 12 mm
  • WireStacker 1000: lengths up to 3 m

Selecting Schleuniger Wire Processing Machines

Schleuniger cut and strip machines are selected by cable diameter and cross section. EcoStrip 9380 handles wires of 0.3–8.0 mm, the E300 family cable of 0.3–8.0 mm and the E400 family 0.8–12.5 mm with 0.14–16 mm² cross sections.

MultiStrip 9480 in six versions processes wires of 0.5–12.5 mm, PowerStrip 9580 0.5–16 mm and 0.5–70 mm², and MegaStrip 9680 cables up to 35 mm and 120 mm², or 300 mm² as an option.

Cutting without stripping uses the EcoCut 3200 with a tube head for tubes up to Ø 12.7 mm, the EcoCut 3300 for up to 16 mm² and flat material up to 100 mm, and the PowerCut 3700 for cable up to 70 mm² and 25 mm.

Stripping is done by the portable B300 for 0.03–8 mm², the B440 for coaxial and multiconductor cable of 0.05–40 mm² and the JacketStrip 8310 for slitting jackets of 2.5–25 mm cable.

Schleuniger Crimp Presses

UniCrimp 208 crimps rear-feed and side-feed banded terminals on 0.05–6 mm² conductors with 33 kN of force. StripCrimp 208 combines stripping of 0.5–15 mm and crimping of 0.05–6 mm² wires in one cycle.

Loose-piece terminals are handled by the CT series: CT 15 at 15 kN, CT 34 up to 20 kN, CT 60 up to 60 kN and the hydraulic CT 150 up to 150 kN, which crimps closed barrels up to 400 mm². The ACO 08 crimp force monitor can be integrated into all Schleuniger benchtop crimping presses.

Quality Tools and Peripherals

PullTester 20 measures pull forces up to 500 N, PullTester 27 at 2,000 and 5,000 N, optionally 5,000 and 10,000 N; PullTester 325 works in three ranges, and PullTester 326 performs destructive and nondestructive tests.

The CHM crimp height gauge with a spring-loaded pin and the PullTester connect via WinCrimp software, and SmartDetect on the machines detects blade contact with the conductor.

Peripherals complete the machine: the PreFeeder 2500 active dereeler for wire and tubing up to 12 mm, the CableCoiler 1300 with two coiling units for cable up to 12 mm and coils up to 10 kg, the WireStacker 1000 for lengths up to 3 m and the WireStacker 3150 for axial stacking.

Schleuniger Company

Schleuniger was founded in 1975, and its largest site is in Thun, Switzerland. Today Schleuniger is a product brand of the Komax Group, covering semi-automated wire and cable processing equipment.

The range covers conventional and coaxial cables: cut and strip, cutting, stripping, crimping, quality tools and peripherals. Manufacturer service includes yearly inspections, calibration, maintenance and on-demand repair.

Schleuniger and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Schleuniger and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.