3D Systems (3D SYSTEMS) Industrial 3D Printers and Systems
Technical selection and configuration of 3D Systems (3D SYSTEMS) additive manufacturing equipment: SLA 750 / 825 Dual, DMP Flex 350 / Factory 500, SLS 380, Figure 4, PSLA 270, ProJet MJP, and EXT 1070 Titan Pellet.
Industrial Stereolithography SLA 750 and SLA 825 Dual
SLA 750 (750 x 750 x 550 mm) and SLA 825 Dual (830 x 830 x 550 mm) use HyperScan lasers for 50–150 µm layers and +/-0.051 mm tolerance below 34 mm. Serviceable subassemblies include dual-rail recoaters, removable vats, resin level sensors, and 4W laser optics for Accura resins.
- Build: 750x750x550 / 830x830x550 mm
- 50–150 µm layer, +/-0.051 mm <34 mm
- Dual 4W HyperScan lasers (825 Dual)
- Dual-rail recoater, vats, level sensors
Direct Metal Printing DMP Flex 350 and Factory 500
DMP Flex 350 (350 x 350 x 350 mm) and DMP Factory 500 (500 x 500 x 500 mm) maintain vacuum oxygen levels below 25 ppm with removable print modules (RPM) for high-purity metal production. Key spares include recoater blades, protective optical glass, inert gas filters, and RPM seals.
- Build: 350x350x350 / 500x500x500 mm
- Vacuum chamber <25 ppm O2 (~10 ppm)
- LaserForm Ni625, Ni718, Ti, AlSi10Mg
- DPM/PRM/RPM modules, blades, filters
Selective Laser Sintering SLS 380 and MQC Modules
The SLS 380 builds functional polymer parts up to 381 x 330 x 460 mm at speeds up to 2.7 l/hr using a water-cooled laser, eight calibrated heaters, and a 100,000 samples/sec IR thermal loop. Automated powder stations MQC Single and MQC Flex blend PA11/PA12 feeds cleanly.
- Build: 381 x 330 x 460 mm, up to 2.7 l/hr
- Water-cooled laser, 8 heaters, IR loop
- MQC Single & MQC Flex (up to 4 printers)
- Heater elements, IR sensors, optics, seals
Projection Photopolymer Systems Figure 4 and PSLA 270
Figure 4 scales from Standalone and Figure 4 135 to Modular and Production factory cells, while PSLA 270 (242 x 265 x 300 mm) pairs dual 7W HD projectors at 90 µm pixel pitch. Service items include non-contact membranes, roll-in vats, dual-rail recoaters, and auto-fill pumps.
- PSLA 270 build: 242 x 265 x 300 mm
- Dual 7W HD projectors, 90 µm pixel pitch
- Figure 4 Standalone, Modular, Production
- Membranes, projectors, pumps, recoaters
MultiJet Printing ProJet MJP 2500 and MJP 300 Series
ProJet MJP 2500 and 2500 Plus (294 x 211 x 144 mm) jet VisiJet rigid, elastomeric, and wax materials at up to 1600 x 900 x 790 DPI, alongside MJP 300 and ProJet MJP 5600 lines. Replaceable assemblies cover industrial printheads, UV lamps, carbon filters, and build plates.
- MJP 2500 build: 294 x 211 x 144 mm
- Up to 1600 x 900 x 790 DPI resolution
- VisiJet plastics, elastomers, wax lines
- Printheads, UV lamps, filters, plates
Pellet Extrusion EXT 1070 Titan Pellet Hybrid Systems
EXT 1070 Titan Pellet (1070 x 1070 x 1118 mm; LT 1219 mm Z) processes CF-PEI, GF-PEKK, and GF-PC pellets at 400 C extrusion, 140 C bed, and up to 13.6 kg/hr through 0.6–9.0 mm nozzles. Optional 18,000 RPM CNC spindle adds milling; spares cover screws, heaters, nozzles, and servos.
- Build: 1070x1070x1118 mm (LT 1219 mm Z)
- 400 C extruder, 140 C bed, 80 C chamber
- 0.6–9.0 mm nozzles, up to 13.6 kg/hr
- 18,000 RPM CNC spindle, servo motion
Workflow Architecture and Software Ecosystem
3D Systems (3D SYSTEMS) industrial platforms pair matched hardware, materials, and build-preparation software across seven additive technologies.
3D Sprint handles over 40 CAD and mesh formats with automated nesting and 150+ material profiles across polymer lines, while 3DXpert manages metal print preparation and scan strategies for DMP Flex 350 and DMP Factory 500 systems.
Automated peripherals reduce material handling and changeover downtime: MQC Single and MQC Flex blend fresh and recycled nylon powder for up to four SLS printers, Removable Print Modules (RPM) transfer sealed builds between DMP printer and depowdering stations, and MJP EasyClean automates wax support removal.
Selecting System Class and Peripheral Configuration
System selection depends on target part envelope (from 242 x 265 x 300 mm on PSLA 270 to 1070 x 1070 x 1118 mm on EXT 1070 Titan Pellet), laser or projector count, material class (Accura, DuraForm, VisiJet, LaserForm, or open-market pellets), and optional hybrid 18,000 RPM CNC milling on Titan Pellet gantries.
3D Systems and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of 3D Systems and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Automated Sewing Systems / A-S-S
- Equipment and parts for Hacint Intelligence Technology
- Equipment and parts for HAFI Engineering
- Equipment and parts for HAFNER Pneumatik
- Equipment and parts for 3B Filters
Documents and sources
- 3D Systems Official Website — additive manufacturing portfolio
- About 3D Systems — additive manufacturing history since 1986
- 3D Systems SLA 750 — industrial stereolithography specifications
- 3D Systems SLA 825 Dual — dual-laser SLA system specs
- 3D Systems DMP Flex 350 — vacuum metal 3D printing specs
- 3D Systems DMP Factory 500 — modular metal AM specifications
- 3D Systems SLS 380 — specifications and MQC powder modules
- 3D Systems PSLA 270 — projector-based SLA specifications
- 3D Systems Figure 4 — modular production printer specs
- 3D Systems ProJet MJP 2500 — MultiJet printer specifications
- 3D Systems EXT 1070 Titan Pellet — pellet extrusion specs
- 3D Systems 3D Sprint — additive build preparation software
- 3D Systems Service Plans — maintenance and spare parts support
