Automated Sewing Systems / A-S-S Industrial Sewing Machines

German-built Automated Sewing Systems / A-S-S automated pocket welting, serging, short seamer, dart sewing, and EWS workstation systems (BASS, EWS, JWS, Stacker) with replacement subassemblies.

Pocket Welting BASS 3050–3504T

BASS 3050, 3204, 3204B, 3204Z, 3504, and 3504T units sew straight and slanted welt pockets with or without flaps. Stepper-driven clamp transport pairs with an independent center-cutter motor. Needle gauges span 8–24 mm in 2 mm steps.

  • Series: BASS 3050, 3204, 3204B, 3204Z, 3504, 3504T
  • Needle gauge: 8–24 mm in 2 mm steps
  • Corner cutter adjustment in 0.1 mm increments
  • Drives: stepper clamp transport and center-cutter motor

Serging Units BASS 2020–2565

BASS 2020, 2065, and 2565 single-head and multi-head serging units trim crotch and side seams on trouser and skirt parts. A contour guide positions panels with photocell-triggered sewing start. Integrated stackers discharge finished panels automatically.

  • Series: BASS 2020, BASS 2065, BASS 2565
  • Application: trouser and skirt crotch and side seams
  • Automation: contour guide, photocell start, stacker
  • Units: serging sewing head, chain cutter, EFKA drive

Joining Seamers BASS 4100–4200

BASS 4100, 4150, and 4200 joining seam systems sew side and inside seams on trousers, sports jackets, and skirts. Operators choose safety seam, double chain stitch, or overlock patterns. Photocell sensing and contour guides maintain uniform seam width.

  • Series: BASS 4100, BASS 4150, BASS 4200
  • Stitch types: safety, double chain stitch, overlock
  • Photocell seam-end control and adjustable contour guide
  • Controls: foot and knee switches, guide clamp, cutter

Short Seamers BASS 5100–5800

BASS 5100, 5160, 5300, 5310, 5400, 5600, 5700, and 5800 short seamers process straight and curved side-seam pockets in overlapping cycles. One or two notch cutters activate depending on pocket shape. Vacuum holding and photocell sensing keep seams consistent.

  • Series: BASS 5100, 5160, 5300–5400, 5600–5800
  • Application: straight and curved side-seam pockets
  • Tooling: one or two notch cutters, vacuum clamping
  • Controls: photocell seam sensing and icon control panel

Dart Automats BASS 5900–5970

BASS 5900, 5950, 5970, and EWS 9987 special machines sew darts and pleats on shirts, blouses, trousers, and skirts without stretching stretch fabrics. A vacuum pre-laying station feeds panels to an X-Y clamp axis. USB memory stores 60 seam programs.

  • Series: BASS 5900, 5950, 5970, EWS 9987
  • Output: 4–5 seams per minute in overlapping mode
  • Axes: X-Y clamp drive and 0.1 mm stepper depth control
  • Electronics: USB microprocessor controller, 3 marking lights

EWS Workstations & Stackers

Engineered workstations EWS 6100–7000 and JWS 9200–9987 stitch trouser and skirt waistbands up to 600 units per 8 hours using synchronized puller transport. Auxiliary equipment covers Stacker 400/41 and 200/7, bundleclamp 500, and cross positioning lights.

  • Workstations: EWS 6100–7000, JWS 9200, 9880, 9987
  • EWS 6100 output: up to 600 trousers per 8 hours
  • Stacker 400/41: 1400×1580×1150 mm, 30 kg, 20 Nl/6 bar
  • Auxiliaries: bundleclamp 500, contour guide, EFKA & Kansai

Automated Sewing Systems / A-S-S Equipment Architecture

Automated Sewing Systems / A-S-S manufactures BASS welt pocket machines (BASS 3050–3504T), serging units (BASS 2020–2565), joining and short seamers (BASS 4100–5800), dart automats (BASS 5900–5970), EWS 6100–7000 workstations, and stackers.

Founded in 2000 in Bessenbach, Germany, the manufacturer develops, programs, and assembles automated apparel workstations for menswear (HAKA) and womenswear (DOB) factories, with more than 6,000 units installed worldwide.

Line Integration, Drives, and Auxiliary Tooling

Selecting BASS and EWS units depends on pocket opening geometry, stitch type (safety, double chain, or overlock), needle gauge spacing (8–24 mm on BASS 3050), and fabric sensitivity where vacuum pre-laying prevents stretch distortion on darts and pleats.

Production cells pair with Stacker 400/41 (1400×1580×1150 mm, 6 bar compressed air at 20 Nl), Stacker 200/7, pneumatic bundleclamp type 500, EFKA drive electronics, and Kansai sewing heads backed by dedicated spare part lists.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.