Izumi Products / Maxell Izumi Hydraulic & Electrical Wiring Equipment

Maxell Izumi (Izumi Products, Japan, est. 1939) hydraulic and battery-operated tools for power utilities and industrial contractors: crimpers 50–1960 kN, cutters up to 132 mm, 68.5 MPa pumps, benders, and punchers.

Battery Crimpers REC & ECO

Maxell Izumi / Izumi Products 6th and 7th generation battery crimping tools handle Cu/Al lugs from 6 to 400 mm2. Model REC-6510 delivers 120 kN over a 42 mm stroke, while inline ECO-50/ECO-50M provides 50 kN. Service parts cover 14.4 V batteries, seals, and relief valves.

  • Force 50–120 kN (REC-6510, ECO-50)
  • Cu/Al range 6–400 mm2
  • 12-ton U and BEKU dies
  • 14.4 V batteries and valves

Battery Cable Cutters REC-S

Maxell Izumi / Izumi Products battery-operated cutters shear Cu/Al cables and ACSR conductors in field utility work. Model REC-S640 provides 70 kN output up to 40 mm diameter with a lock-pin closed head. Replacement blades, lock pins, return springs, and hydraulic seals are available.

  • Output force 70 kN (REC-S640)
  • Max 40 mm Cu/Al/ACSR
  • Lock-pin closed cutter head
  • Replaceable blades and pins

Manual Hydraulic Crimpers EP & UC

Maxell Izumi / Izumi Products manual hydraulic crimpers combine C-head jaws with insulated fiberglass handles. Models EP-431 (106 kN) and EP-510C (118 kN) take 12-ton U-type dies up to 400 mm2, while dieless UC-6B delivers 60 kN. Spares include O-ring kits, valves, and rams.

  • EP-431 (106 kN) and EP-510C (118 kN)
  • Dieless UC-6B (60 kN, 360 deg)
  • Cu/Al range 10–400 mm2
  • Seal kits, valves and rams

Remote Crimping Heads EP-HS2 & EP-200W

Maxell Izumi / Izumi Products remote heads operate at 68.5 MPa for substation and overhead transmission conductors. Single-acting EP-610HS2 develops 139 kN up to 630 mm2, while double-acting EP-200W reaches 1960 kN on 100 mm sleeves. Spares cover die caps, 3/8 couplers, and seals.

  • EP-610HS2 (139 kN, up to 630 mm2)
  • EP-200W (1960 kN, 100 mm OD)
  • Rated pressure 68.5 MPa
  • 3/8 couplers, die caps, seals

Hydraulic Cable Cutters S & P

Maxell Izumi / Izumi Products cutters shear Cu/Al power cables, guy wire, and mild steel rods. Self-contained S-240A (76 kN, 24 mm) and S-550A (120 kN, 55 mm) pair with remote guillotine head P-132 (95 kN, 132 mm at 68.5 MPa). Spare parts include moving and fixed blades and pins.

  • S-240A (76 kN, 24 mm Cu/Al/St)
  • S-550A (120 kN, 55 mm Cu/Al/St)
  • Remote P-132 (95 kN, 132 mm)
  • Replaceable guillotine blades

Hydraulic Pumps R14E-H & HPE-160M

Maxell Izumi / Izumi Products pumps power remote heads at 68.5 MPa rated pressure. Electric single-acting R14E-H (340 W, 120/220 V, 1.7 L tank) delivers 2.9/0.3 L/min, while gasoline HPE-160M (HONDA GX-160, 10 L) outputs 7.5/1.2 L/min. Spares include hoses, switches, and relief valves.

  • Rated pressure 68.5 MPa
  • R14E-H: 340 W, 2.9/0.3 L/min
  • HPE-160M: HONDA GX-160, 10 L
  • Hoses, remotes and relief valves

Hydraulic Punches SH & Benders PB

Maxell Izumi / Izumi Products punches and pipe benders serve panel fabrication and conduit installation. Remote SH-70B (304 kN) punches 20.5 mm holes in 13 mm mild steel, manual SH-5PDG (50 kN) handles 115.5 mm in 3.2 mm sheet, and PB-10N (108 kN) bends JIS conduit. Dies and shoes available.

  • SH-70B: 304 kN, 20.5 mm in 13 mm steel
  • SH-5PDG: 50 kN, 115.5 mm in 3.2 mm
  • PB-10N bender: 108 kN, 250 mm stroke
  • Punches, draw studs and shoes

Dies, Cutter Blades & Seal Kits

From the Maxell Izumi / Izumi Products spares specification we supply 12-ton U-type (DIN 46235 K6–K34), 15-ton P-type, BEKU, and JIS hexagonal dies plus P-U adapters. Service spares cover replacement blades, O-rings, back-up rings, springs, valves, and couplers for active and discontinued tools.

  • 12t U, 15t P, BEKU and JIS dies
  • P-U die adapters and retainers
  • Hydraulic O-ring and seal kits
  • Spares for discontinued tools

Equipment Selection for Utility and Industrial Projects

Maxell Izumi (Izumi Products) equipment selection depends on conductor cross-section (6 to 630 mm2), cutting diameter up to 132 mm, output force from 50 kN to 1960 kN, die system (12-ton U, 15-ton P, BEKU, JIS), and 68.5 MPa single- or double-acting pump matching.

For compact panel wiring up to 150 mm2, the inline ECO-50/ECO-50M (50 kN) accepts BEKU dies and an optional 50AT-25YC cutter head, whereas 12-ton U-die Cu/Al terminations up to 400 mm2 rely on battery REC-6510 (120 kN) or manual EP-431 and EP-510C. Heavy substation and transmission lines utilize remote EP-610HS2 (139 kN) and double-acting EP-200W (1960 kN).

68.5 MPa Pump Pairing and Tooling Standards

Single-acting remote tools including EP-610HS2, P-132 guillotine cutter (up to 132 mm Cu/Al), PB-10N JIS conduit bender, and SH-70B steel puncher (304 kN) match the electric R14E-H pump rated at 68.5 MPa with 2.9/0.3 L/min flow and 1.7 L reservoir.

Double-acting EP-100W and EP-200W compression heads require dual-line hydraulic units such as the gasoline-powered HPE-160 or HPE-160M (HONDA GX-160, 7.5/1.2 L/min, 10 L tank, up to 20 m hose length).

Dies (U, P, BEKU, JIS), pipe shoes, and punch sets are configured separately to project specifications.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.