ZATOR / ZATOR Srl Industrial Adhesive Dispensing Systems
Complete cold-glue, hot-melt, and two-component dispensing systems engineered by ZATOR (ZATOR Srl) with CNC-machined valves, pump feed units, and microprocessor pattern controllers.
Diaphragm Feed Units A158001 / A159002
ZATOR (ZATOR Srl) 1:1 double-diaphragm feed units deliver low-viscosity cold glues, inks, and varnishes from a 28 L bucket. Unit A158001 uses a manual regulator, while A159002 adds a 0–20 mA proportional valve. Spares cover Santoprene diaphragms, balls, filters, and bottom check valves.
- 1:1 ratio, 1–6 bar output
- 28 L bucket, 10–11 kg
- A159002: 0–20 mA valve
- Santoprene diaphragms
Piston Feed Units GFUP / A169001 / A190001
ZATOR Srl stainless piston pumps feed medium-viscosity glues, greases, and silicones up to 60 bar. Models cover 2:1 (GFUP02010/011), 5:1 (A169001/170001/171001), and 10:1 (A190001) ratios. Spares include piston seals, reinforced hoses, bottom valves, and regulators.
- 2:1, 5:1 and 10:1 ratios
- 1–12 / 30 / 60 bar output
- 28 L bucket, 6 bar air
- Piston seals and hoses
Stainless Pressure Tanks LIGHT / LDG / MDG
ZATOR (ZATOR Srl) stainless tanks dispense glues, inks, and varnishes smoothly without pump pulsation. LIGHT models offer 9 and 18 L up to 3 bar, while CE-marked LDG and MDG tanks span 1 to 42.5 L up to 6 bar. Spares cover lid seals, gauges, safety valves, agitators, and level sensors.
- LIGHT: 9 / 18 L, max 3 bar
- LDG / MDG: 1–42.5 L, 6 bar
- Stainless steel body
- Safety valves and gauges
Microprocessor Controllers LMZ / LMZR / MCZ
ZATOR Srl controllers drive valves in encoder or timer mode at ±1 mm accuracy up to 700 m/min. Series LMZ02/04, remote LMZ04R/08R/16R, and MCZ02/04 feature 7" or 10" TFT screens and 0–20 mA output. Spares include KCN connector kits, encoders, photocells, and HRD00100 modules.
- ±1 mm accuracy @ 700 m/min
- Up to 16 channels, 99 jobs
- 7" / 10" TFT, 220 V 50 Hz
- KCN kits and photocells
Electromagnetic Valves DLK16 / DLK22 / VH2
ZATOR (ZATOR Srl) airless valves deliver high-speed dots and lines via stainless zero-cavity nozzles. Lineup spans DLK16 (1000 dots/s), DLK22KV/LV (25 bar), VH2KV/LV (35 bar), and spray DLK22S/VLK22S. Spares cover KV/LV/KC nozzles, ceramic-ball needles, coils, and WCB322505 cables.
- DLK16: up to 1000 dots/s
- VH2: 35 bar, 500 dots/s
- 0.15–1.5 mm nozzles
- 6/12/24 V coils & needles
Pneumatic Spray Valves MMZF / MF1 / MZS / 360°
ZATOR Srl spray guns atomize low-viscosity glues, varnishes, and lubricants at 0.5–2.5 bar air. Models include MMZF (6 bar), MF1/MZS (25 bar, 24 V), and MZF360/MZS360 with 20–200 mm extensions. Spares cover non-stick air caps, nozzles, self-cleaning needles, and PDG00100 units.
- MMZF/MF1/MZS: 6–25 bar
- MZF360/MZS360: 20–200 mm
- 0.3–1.5 mm round/oval cap
- Non-stick caps & PDG00100
Extrusion & Coating Valves MV1 / MK1 / MZB / SPL
ZATOR (ZATOR Srl) valves dispense glues, silicones, and greases: MZD100 (30 bar), MV1/MK1 (80 bar), MZK (80 bar), MZB200/300 (150 bar), SB (50 bar), M250 PTFE, and MZL100/SPL coaters (to 100 mm). Spares include WC/TiN needles, Variseal rings, nozzles, and coating lips.
- MV1 / MK1 / MZK: up to 80 bar
- MZB200 / MZB300: up to 150 bar
- MZL100 / SPL: up to 100 mm
- WC/TiN needles & Variseal
Filters, Regulators, 2K & Hot-Melt Systems
ZATOR Srl components protect nozzles and stabilize pressure: filter K95518600 (300 um, 25 bar), Y-filter FLT205100 (150 um, 100 bar), MZF1138, 2K units NVZ91/181/182, and hot-melt modules. Spares cover FLC030050, FLC030200, FLC20100, FLC010150, and FLT000010 cartridges.
- K95518600: G1/2, 300 um
- FLT205100: 150 um, 100 bar
- 2K systems NVZ91 / 181 / 182
- FLC & FLT000010 cartridges
System Architecture & Selection for ZATOR (ZATOR Srl)
ZATOR (ZATOR Srl) designs and manufactures complete cold-glue, hot-melt, and two-component dispensing systems combining diaphragm and piston pump feed units, stainless steel pressure tanks, LMZ microprocessor controllers, and high-frequency electromagnetic or electropneumatic guns.
Feed selection follows fluid viscosity and machine speed: 1:1 diaphragm pumps (A158001/A159002) and LIGHT/LDG/MDG tanks pair with airless DLK16, DLK22, and VH2 electromagnetic valves up to 1000 dots/s, whereas medium- and high-viscosity adhesives use 2:1, 5:1, or 10:1 piston stations with MV1, MK1, MZB200/300, or MZL/SPL applicators.
LMZ Control Synchronization & Industrial Integration
LMZ02, LMZ04, and remote LMZ04R/LMZ08R/LMZ16R touch-screen controllers deliver ±1 mm pattern accuracy up to 700 m/min in encoder or timer mode, store up to 99 programs, and drive 0–20 mA proportional regulators for speed-matched fluid pressure.
Inline stainless filters (K95518600 300 um, FLT205100 150 um) and distributors protect zero-cavity nozzles across folder-gluers, tray formers, paper bag machines, can-lid sealing (MCZ02/MCZ04), woodworking dowel lines, and water-based 2K foam assembly (NVZ91/181/182).
ZATOR and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of ZATOR and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for ZAMBELLI Enotech
- Equipment and parts for Hangzhou Xinglong Pump
- Equipment and parts for Zander Aachen
- Equipment and parts for Hankwang Electric
Documents and sources
- Official ZATOR 2024 Product Catalog — feed units, tanks, LMZ controllers, DLK/VH2/MV1/MZB/MZL valves
- ZATOR Official English Website — cold and hot glue systems, controls, valves and applications
- ZATOR Product Categories — cold glue, hot glue and two-component dispensing systems
- ZATOR Inline Filters & Cartridges — specifications for K95518600, FLT205100, MZF1138, FLC, FLT000010
- ZATOR Two-Component Systems — water-based adhesive units NVZ91, NVZ181 and NVZ182
- ZATOR Srl Manufacturer Homepage — industrial adhesive and fluid systems (Cusano Milanino, Italy)
