Albert Knoblinger (Knoblinger) Bulk Handling & Pellet Equipment
Austrian bulk material handling systems, turnkey wood pellet plants, PelletsCUBE modular units, conveyors, silos, and replacement assemblies from Albert Knoblinger GmbH (Knoblinger).
Turnkey Pellet Plants & PelletsCALIBRATOR
Knoblinger builds turnkey pellet plants (10–50+ t/h), PelletizingMODULE (1–2 t/h), and MICROpelletizing (0.25 t/h). Lines process wood chips, sawdust, and biomass at 12–55% moisture. Sizing uses PC250/PC500 units per DIN EN 14961-2 with dies, rollers, beaters, and screens.
- 10–50+ t/h, 60+ plants
- PC250 / PC500 up to 20 t/h
- Moisture: 12% or 55% dryer
- Dies, rollers, beaters, screens
PelletsCUBE Modular Plants
PelletsCUBE includes CUBE M, L, XL, XL-S, and XXL-7TT rated at 2.0–6.0 t/h. Grinding, pressing, cooling, and ATEX protection fit in six 20ft ISO frames (7,320×6,060 mm). Replacement items include dies, rollers, filter bags, special pellet belts, and cabinet parts.
- CUBE M to CUBE XXL-7TT
- 2.0–6.0 t/h, 335–675 kW
- Six 20ft ISO frames, ATEX
- Dies, rollers, filter bags, belts
Screw & Injector Conveyors
Trough screws (up to 900 m3/h, dia 200–1,250 mm), tubular screws (up to 600 m3/h, dia 68–1,000 mm), and injector screws operate up to 300 C. Spans reach 12 m without hanger bearings in mild, stainless, or wear-resistant steel. Wear spares cover flights, shafts, bearings, seals, and liners.
- Trough screws up to 900 m3/h
- Tubular screws up to 600 m3/h
- Up to 12 m span, up to 300 C
- Flights, bearings, seals, liners
Chain & Scraper Conveyors
Closed-trough chain and open scratch conveyors move wood chips, ash, steel dust, and ore over spans up to 60 m and widths 200–2,000 mm. Rated up to 900 m3/h and 450 C, they run horizontally, inclined, or vertically. Spares cover chains, scrapers, sprockets, liners, and tensioners.
- Up to 900 m3/h, width 200–2,000 mm
- Length up to 60 m, up to 450 C
- Horizontal, inclined, vertical
- Chains, scrapers, sprockets, liners
Belt Conveyors & Bucket Elevators
Range covers sliding, apron, troughed, and corrugated-edge belts (up to 900 m3/h, 300 m), RGF 500/800/1000 tubular belts (up to 1,250 m3/h, 500 m), and belt/chain bucket elevators up to 60 m and 480 C. Spares cover belts, buckets, chains, drums (400–1,000 mm), idlers, and alignment sensors.
- RGF 500/800/1000 up to 1,250 m3/h
- Bucket elevators up to 60 m, 480 C
- Belt widths 300–2,000 mm
- Buckets, belts, drums, idlers
Silos, Bunkers & Discharge Systems
Storage units cover modular silos up to 100 m3, rotating beam floors (Drehbalkenboden, up to 500 t/h), agitators (up to 300 m3/h), moving floors (up to 400 m3/h, 16 m stroke), and multi-screw dischargers. Spares cover hydraulic cylinders, slats, arms, and seals.
- Rotating beams up to 500 t/h
- Moving floors up to 400 m3/h
- Multi-screw unloaders up to 500 m3/h
- Hydraulics, slats, arms, bearings
Screening, Mixing, Dosing & Pneumatic
Units cover star screens (up to 600 m3/h), air classifiers (up to 120 t/h), magnetic separators (up to 500 m3/h), paddle mixers (up to 20 t/h), dosing screws (0.1–80 t/h), and pneumatic lines (50 t/h, 300 m). Spares cover star shafts, paddles, rotary airlocks, slide gates, and flaps.
- Star screens up to 600 m3/h
- Dosing 0.1–80 t/h, gates 200–1,600 mm
- Pneumatic lines up to 50 t/h, 300 m
- Rotary airlocks, stars, paddles, flaps
Debarking, Receiving & Loading Plants
Timber plants feature step singulators and debarkers up to 50 t/h atro (logs up to 6 m, dia 700 mm), truck/rail receiving up to 350 t/h, BigBag and 15 kg bagging, and loading up to 160 t/h. Spares include rotor tools, hydraulic valves, load cells, and loading chutes.
- Debarkers up to 50 t/h atro, dia 700 mm
- Receiving: truck 200, rail 350 t/h
- Loading up to 160 t/h, BigBag & 15 kg
- Rotor tools, hydraulics, chutes, sensors
Turnkey Wood Pellet Plants & PelletsCUBE Systems
Austrian manufacturer Albert Knoblinger GmbH (Knoblinger) designs and delivers turnkey wood pellet plants (10–50+ t/h, over 60 plants operating worldwide), PelletizingMODULE units (1–2 t/h), MICROpelletizing (0.25 t/h), and factory-preassembled PelletsCUBE systems (CUBE M, L, XL, XL-S, XXL-7TT rated 2.0–6.0 t/h in six 20ft ISO frames).
Lines handle wood chips, sawdust, roundwood, and agricultural biomass at 12% moisture without a dryer or 55% with drying, integrating PelletsCALIBRATOR PC250 and PC500 to eliminate oversize pellets per DIN EN 14961-2.
Bulk Material Handling Specs & RFQ Parameters
Knoblinger conveyor and silo engineering covers trough and tubular screws (up to 900 m3/h, 300 C), chain scraper conveyors (up to 60 m, 450 C), RGF 500/800/1000 tubular belt conveyors (up to 1,250 m3/h), bucket elevators up to 60 m (up to 480 C), rotating beam floors (Drehbalkenboden, 500 t/h), hydraulic moving floors (400 m3/h), star screens, paddle mixers, and pneumatic conveying.
To prepare an accurate equipment quotation, specify the bulk material, moisture and abrasiveness, operating temperature, target throughput (m3/h or t/h), layout span/height, and ATEX requirements.
Albert Knoblinger and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Albert Knoblinger and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Stöcklin
- Equipment and parts for ZAMBELLI Enotech
- Equipment and parts for Zander Aachen
- Equipment and parts for Hankwang Electric
Documents and sources
- Albert Knoblinger GmbH — official home page and company profile
- Knoblinger Company — production site, export share and sectors
- Engineering, CNC machining, EXC 3 welding and commissioning — Expertise
- Industrial Services — commissioning, maintenance, retrofit and spare parts
- Metal Division — high-temperature steelworks dust conveying systems
- Loading plants & bagging equipment — truck, rail, 15 kg and big-bag systems
- Waste Division — conveying, silo and dosing systems for alternative fuels
- Knoblinger World of Pelletizing brochure (PDF, 2026)
- PelletsCUBE modular pelletizing plant brochure (PDF, 2023)
- PelletsCALIBRATOR PC250/PC500 brochure (PDF)
- Knoblinger Components 2026 technical overview (PDF, DE)
