BYCON (Hangzhou Bycon Industry) Concrete & Diamond Equipment
Diamond core drill motors DB/DMP, Hulk/DSP drill rigs, DFG concrete floor grinders, DFS floor saws, WS-600 wall saws, IVC HEPA dust extractors, and DMD magnetic drills from Hangzhou Bycon Industry.
Diamond Core Drill Motors DB / DMP
BYCON DB-132, DB-162P/D, and DMP-162P motors drill reinforced concrete, masonry, and stone. DB-132 delivers 1500W brushless micro-percussion output up to 132 mm, while DMP-162P pairs 2200W with a 3-speed gearbox and PRCD protection. Key parts include carbon brushes, water seals, clutches, and gears.
- Series: DB-132, DB-162P/D, DB-202, DMP-52/132/162/352/500
- DB-132: 1500W brushless, 1530/3060 rpm, 14 Nm, 48,000 bpm
- DMP-162P: 2200W, 650/1300/2600 rpm, up to 202 mm
- Parts: brushes, water seals, slip clutches, gear sets
Core Drill Rigs & Stands Hulk / DSP / DBS
BYCON rigs Hulk-252, DSP-252, DSP-352, DSP-500, DSP-2000, and ceiling stand DSP-3000 stabilize motors on concrete. Hulk-252 weighs 8.5 kg with eight steel carriage rollers, a 40x40x750 mm column, and 500 mm travel. Replaceable parts cover rollers, rack lock teeth, motor plates, and vacuum gaskets.
- Models: Hulk-252/252S, DSP-252/352/500/2000/3000, DBS-162/352
- Hulk-252: max 252 mm concrete, 500 mm travel, 8.5 kg
- DSP-2000: 1600 mm travel length, 60 mm motor mounting
- Parts: steel guide rollers, rack lock teeth, motor plates
Concrete Floor Grinders DFG / DHG
BYCON DFG-250, DFG-250E, DFG-300S, DFG-480, and DHG-180 grind concrete, terrazzo, and epoxy coatings. DFG-250 accepts 250 mm heads or Redi-lock shoes via a converter and uses a 9A to 14A over-current switch. Service parts include detachable dust shrouds, conversion plates, dampers, and bearings.
- Series: DFG-250, DFG-250E/B, DFG-300/300S, DFG-480, DHG-180
- DFG-250: 250 mm head, wet/dry ports, 9A-14A over-current switch
- Tooling: direct 250 mm heads or Redi-lock shoes via converter
- Parts: detachable dust shroud, Redi-lock plate, bearings
Walk-Behind Concrete Floor Saws DFS
BYCON floor saws DFS-350 and DFS-500 cut concrete, reinforced concrete, asphalt, and masonry. Cutting depths reach 140 mm on DFS-350 with 14-inch blades and 190 mm on DFS-500. Service parts include spindle bearings, V-belts, blade guards, water valves, and depth screws.
- Models: walk-behind concrete and asphalt saws DFS-350, DFS-500
- Max cutting depth: 140 mm (DFS-350) and 190 mm (DFS-500)
- DFS-350 blade match: 14-inch diamond saw blades
- Parts: spindle bearings, V-belts, depth crank, blade guard
Wall, Chain & Ring Saws WS / CSP / RSP
BYCON sawing equipment covers wall saw WS-600 (3500W, 600 mm blade, 240 mm depth, TFT screen), brushless chain saw CSP-455 (3300W, 11,000 rpm, 14-inch bar), ring saw RSP-430, and cut-off saw HSP-406. Maintenance items include chains, guide bars, drive sprockets, water seals, and TFT displays.
- Series: WS-600, CSP-455, RSP-430, HSP-406
- WS-600: 3500W, 220-240V, 2500 rpm, 600 mm blade, 240 mm depth
- CSP-455: 3300W brushless, 11,000 rpm, 350 mm depth, 9.5 kg
- Parts: diamond chains, guide bars, sprockets, TFT controller
Industrial HEPA Vacuums IVC & Vacuum Pumps DVP
BYCON dust extractors IVC-1000, IVC-2000, IVC-3000, and AVC-38 collect fine concrete dust, while DVP-75 and DVP-85 pumps anchor vacuum drill bases. IVC-2000 delivers 400 m3/h airflow at 220 mbar with H13 HEPA filtration and jet-pulse cleaning. Parts cover HEPA filters, pre-filters, bags, and vanes.
- Models: IVC-1000/2000/3000, AVC-38 HEPA, DVP-75/85 pumps
- IVC-2000: 240V 8A, 400 m3/h airflow, 220 mbar vacuum, 48 kg
- Filtration: 3.0 m2 pre-filter + 2.4 m2 H13 HEPA (>99.99% @ 0.3 um)
- Parts: H13 HEPA cartridges, pre-filters, drop bags, DVP vanes
Magnetic Drilling Machines DMD-50S / DMD-50M
BYCON DMD-50S and DMD-50M drill steel for bridges, ships, and machinery with 0.01 to 0.05 mm accuracy. DMD-50S runs at 1700W, 0-550 rpm, MT3 spindle, 200 mm travel, and 15,000 N adhesion with auto reverse. Parts cover carbon brushes, magnet coils, rails, and arbors.
- Models: DMD-50S (reversible tapping) and DMD-50M
- DMD-50S: 1700W, 220V/50Hz, 0-550 rpm, 12-50 mm annular coring
- MT3 spindle, 200 mm travel, 15,000 N magnetic adhesion, 12.1 kg
- Parts: carbon brushes, magnet base coil, steel rails, coolant kit
Thrall Petrol Tools, Diamond Bits & Accessories
Under the Thrall brand, BYCON manufactures petrol post drivers DPD-80 (20-80 mm), DPD-100, DPD-100N, and DPD-120 (>100 mm), petrol breakers, and hammer drills. Diamond tooling and accessories include Chetak and Tornado core bits, diamond wire, slurry collecting rings, core pullers, and dust swivels.
- Thrall petrol series: DPD-80/100/100N/120 post drivers, breakers
- Diamond core bits: Chetak, Tornado, Dry Bird micro-percussion
- Cutting blades, diamond wire, grinding cup wheels, shoes
- Accessories: PVC slurry rings, dust swivels, core bit pullers
Selecting BYCON Core Drill Motors and Rigs
BYCON core drilling systems pair compact micro-percussion motors like DB-132 (1500W brushless, up to 132 mm dry coring in reinforced concrete) and DB-162P/D (2200W, 6.5 kg) with heavy-duty 3-speed wet motors such as DMP-162P, DMP-352, and DMP-500.
For deep or large-diameter coring up to 252-500 mm, motors mount onto Hulk-252 (8 steel rollers, 500 mm travel), DSP-252, DSP-352, DSP-500, long-travel DSP-2000 (1600 mm), ceiling rig DSP-3000, or vacuum bases DBS-162/352 driven by DVP-75/DVP-85 vacuum pumps.
Concrete Grinding, Sawing & Dust Control Integration
Surface preparation machines DFG-250, DFG-250E, DFG-300S, and DFG-480 remove epoxy coatings and level concrete or terrazzo using 250 mm heads or Redi-lock shoes, connecting directly to H13 HEPA extractors IVC-1000, IVC-2000 (400 m3/h, 220 mbar), and IVC-3000.
Cutting and steel fabrication needs are addressed by DFS-350/500 walk-behind floor saws (140 mm and 190 mm depth), WS-600 wall saw (3500W, 240 mm depth), brushless saws CSP-455/RSP-430/HSP-406, DMD-50S magnetic drills, and Thrall petrol post drivers.
BYCON and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of BYCON and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Dezhou Guanlu / Guanlu Drilling
- Equipment and parts for HAM Präzision
- Equipment and parts for Hanbell Precise Machinery
- Equipment and parts for HÄNDLE
Documents and sources
- Hangzhou Bycon Industry Co., Ltd. — Company Profile, History & Sub-brands
- BYCON Construction Machines Catalogue (DB, DMP, Hulk, DSP, DBS)
- BYCON DB-132 Brushless Micro Percussion Core Drill Specifications
- BYCON DMP-162P 2200W 3-Speed Wet Core Drill Motor Specifications
- BYCON DB-162P 2200W Micro Percussion Drill Motor Specifications
- BYCON Hulk-252 Diamond Core Drill Rig Specifications
- BYCON DFG-250 250mm Concrete Floor Grinder Specifications
- BYCON Walk-Behind Concrete Floor Saws DFS-350 and DFS-500
- BYCON WS-600 3500W Concrete Wall Saw Specifications
- BYCON CSP-455 3300W Brushless Concrete Chain Saw Specifications
- BYCON IVC-2000 Industrial Dust Extractor with H13 HEPA Filter
- BYCON Vacuum Pumps DVP-75 and DVP-85 for Core Drill Rigs
- BYCON DMD-50S 1700W Magnetic Drill Machine Specifications
- BYCON Thrall Petrol Post Drivers DPD-80/100/120 & Breakers
- BYCON Diamond Core Bits, Saw Blades and Grinding Tools
- BYCON After-Sale Service and Spare Parts Support
