Hangzhou Denice Machinery (DENICE) Equipment
Vertical and horizontal injection molding machines by Hangzhou Denice Machinery (DENICE): DV, DC, DK, CE, and BRF series (15–650 t vertical, 30–4,000+ t horizontal) for insert, LSR, and BMC molding.
DV Series Vertical Machines
Four-tie-bar DV vertical clamping presses span 25 to 450 tons and up to 961 g PS shot weight for insert molding. Screw diameters run 25 to 75 mm with injection pressure up to 2,570 kg/cm2 and 140 kg/cm2 hydraulics. Key parts include screws, barrels, heaters, seals, and proportional valves.
- Clamping force: 25–450 tons
- Screw diameters: 25–75 mm
- Max injection: 2,570 kg/cm2
- Opening stroke: 180–450 mm
DV-S and DV-DS Slide-Table Series
Single and double slide-table machines (DV-850S, DV-250DS to DV-2100DS) shuttle lower molds clear of the clamp for tube shoulders and inserts. Slide strokes reach 350 to 620 mm and lift output up to 30%. Replaceable items cover linear guides, slide cylinders, proximity sensors, and seals.
- Clamping (DS): 25–100+ tons
- Slide table stroke: 350–620 mm
- Cycle efficiency gain: up to 30%
- Parts: slide guides, cylinders, sensors
DV Rotary Table Series (2R / 3R)
Multi-station rotary table models (DV-850.2R, DV-1000.2R to DV-2500.2R) run 2 or 3 stations for bakelite handles, filters, and lancets. Rotary diameters span 1,200 to 1,400 mm at 100 to 167 tons. Service parts include slewing bearings, indexing pins, rotary unions, and heaters.
- Rotary table: 1,200–1,400 mm
- Stations: 2-station and 3-station
- Motor power (1600.2R): 18.5 kW
- Parts: slewing rings, pins, unions
DC Columnless C-Frame Series
DC machines (DC-450, DC-450DS, DC-750DS, DC-450.2R, DC-850.2R, DVC-600) pair vertical mold clamping with horizontal injection on a columnless frame. Three-side access simplifies loading long power cords and cable harnesses. Spare parts cover nozzles, thermocouples, transducers, and seals.
- Frame: columnless C-type
- Access: open on three sides
- Models: DC-450, DC-750DS, DC-850.2R
- Focus: power cords and plugs
DK Series (Bakelite, BMC, LSR)
DK machines (DK-400, DK-900.3R, DK-1200S.BMC, DK-1600, DK-2100S, DK-3500DS) combine four-column vertical clamping with a horizontal injection unit. High mold space supports phenolic bakelite, BMC, and liquid silicone rubber. Service items include special screws, check valves, and heaters.
- Layout: 4-tie-bar + horizontal unit
- Materials: bakelite, BMC, LSR
- Models: DK-400 to DK-3500DS
- Parts: special screws, valves, heaters
CE Special Series & BRF Horizontal
CE models (DV-600.CE, DV-850.3R.2C.CE, DV-1600.2R.CE) deliver high-speed, two-color, hybrid, and LSR molding, alongside DVU low-pressure units and BRF-78 / BRF-198 horizontal presses (30 to 4,000+ tons). Spare items cover servo drives, pumps, PLC modules, and interlocks.
- CE series: high-speed, 2C, LSR
- Horizontal range: 30–4,000+ tons
- Models: DV-600.CE, DVU, BRF-78/198
- Parts: servo motors, pumps, PLC boards
Selecting Hangzhou Denice Machinery (DENICE) Injection Presses
Hangzhou Denice Machinery builds vertical injection molding machines from 15 to 650 tons clamping force and 1 to 8,000 g shot weight across DV, DC, DK, and CE series.
Four-tie-bar DV machines handle general insert molding, columnless C-frame DC units provide three-side open access for long power cords and cable harnesses, and four-column horizontal-injection DK presses support large molds, bakelite, BMC, and liquid silicone rubber (LSR).
Table Architecture: Standard, Single/Double Slide, and Rotary
Standard vertical stations serve moderate insert runs, while double slide-table DV-DS presses (350 to 620 mm slide stroke) shuttle two bottom molds alternately out of the clamping zone to lift output up to 30%.
Two-station and three-station rotary table presses (DV-2R / 3R with 1,200 to 1,400 mm tables on DV-1000.2R–DV-1600.2R) overlap insert loading and mold cooling for automotive parts, filters, handles, and medical disposables.
Specialized Process Packages and Horizontal Range
Application-configured presses cover thermosetting phenolic bakelite, BMC, LSR, two-color (.2C), low-pressure encapsulation (DVU), and EU CE-compliant high-speed or servo-hybrid machines.
For high-volume horizontal molding, Hangzhou Denice Machinery also manufactures horizontal presses from 30 to over 4,000 tons clamping force, including BRF-78 and BRF-198.
Hangzhou Denice Machinery and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Hangzhou Denice Machinery and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Netstal
- Equipment and parts for Handanshi Kangmai Hydraulic
- Equipment and parts for VPC / Ningbo VPC Pneumatic
- Equipment and parts for E.MC Pneumatics / Zhejiang Eternal Automation
Documents and sources
- Hangzhou Denice Machinery — Official International Website (DV, DC, DK, CE, BRF Series)
- DV Series Vertical Injection Molding Machines Catalog
- DC Series Columnless C-Frame Injection Molding Machines
- DK Series Vertical Clamping Horizontal Injection Machines
- CE Series Vertical Injection Molding Machines
- Denice Horizontal Injection Molding Machines (30–4,000+ Tons)
- DV-DS Double Slide Table Machines Specifications (DV-250DS–DV-1000DS)
- DV Rotary Table Bakelite Machines Specifications (DV-1000.2R–DV-1600.2R)
- DV-1200 to DV-4500 Technical Specifications (120–450 Tons)
- DV-250 to DV-1000 Technical Specifications (25–100 Tons)
- Vertical Injection Molding Machine Architecture and Systems
- Hangzhou Denice Machinery Co., Ltd. — Chinese Official Portal
