HÄNDLE (Haendle) Heavy Clay Machinery & Parts

HÄNDLE GmbH equipment for brick, roof tile, refractory, and ceramic plants: Futura II vacuum extruders, Alpha II/Beta fine roller mills, Duo/Quadro pan mills, MDSG mixers, BKN box feeders, Nova III presses, and wear parts.

Combined De-Airing Extruders FUTURA II

FUTURA II units combine an extruder with a MDVG de-airing mixer. They shape bricks, pavers, and heavy clay products at 24 to 65 bar. Barrel sizes span 200 to 750 mm up to 105 t/h wet. Replaceable parts include augers, liners, naves, and knives.

  • Barrel Ø 200–750 mm
  • Extrusion pressure 24–65 bar
  • Throughput 0.2–60 m³/h (105 t/h)
  • ~6,000 extruders delivered

Fine Roller Mills Alpha II, Beta, Gamma

Alpha II, Beta, and Gamma roller mills grind plastic ceramic raw materials. Alpha II holds a 0.5 mm gap up to 79 m³/h, while Beta reaches 132 t/h wet at 0.8 mm. Roller widths run up to 1500 mm. Key wear items are roller shells, scrapers, and bearings.

  • Alpha II: 0.5 mm gap, up to 79 m³/h
  • Beta: 0.8 mm gap, up to 132 t/h wet
  • Diameter 800–1000 mm, width to 1500 mm
  • Scrapers exceed 12-week service life

Wet and Mixing Pan Mills Duo / Quadro

Duo and Quadro pan mills crush, moisten, and homogenize soft to hard ceramic raw materials. Four balanced runners in Quadro deliver roughly 1.8 times the capacity of two-runner mills. Service parts cover grid plates in six alloys, scrapers, and runners.

  • Duo: 2 runners, inner & outer tracks
  • Quadro: 4 equal runners, 1.8× capacity
  • Plant unit example: HMIQ 2170c
  • Perforated grid plates in 6 materials

Double-Shaft Mixers MDSG, MDG, MDVG

HÄNDLE double-shaft mixers handle mixing, steam-heating, kneading, and impurity separation. MDSG units provide hydraulic screen shifting for stony or fibrous clay, while MDG uses stationary screens. Wear parts include paddle shafts, knives, sleeves, and screens.

  • MDSG: hydraulic screen shifting
  • MDG: stationary screen design
  • MDVG 920f: de-airing twin-shaft mixer
  • Replaceable hard-faced mixing knives

Hammer Mills WHD & Crushers WMM/WMH

WHD hammer mills grind hard or dry mineral feedstocks, while WMM and WMH roller crushers break down coarse lumps. Hydraulically hinged side flaps and bolted wear parts speed up rotor access. Service parts cover turnable hammer heads, screens, and bearings.

  • WHD: turnable reversible hammer heads
  • WMM 416b / WMH 818a roller crushers
  • Bolted replaceable frame liners
  • Operates with or without screen

Box Feeders BKN, BKSS, BKNG

HÄNDLE invented the box feeder in 1906 for feeding, proportioning, and buffering raw clay, prepared bodies, and additives. Series include standard BKN, heavy-duty BKSS, and rubber-belt BKNG. Parts include metal-slat belts, paddle blades, scrapers, and seals.

  • BKN: standard clay & body feeder
  • BKSS: heavy-duty for coarse clay
  • BKNG: rubber belt for free-flowing bulk
  • Hinged belt scraper & auto lubrication

Roof Tile Presses NOVA III and WEGA

The NOVA III eccentric-cam press delivers 400-ton pressing force and 180-ton lateral force for oversized or thin roof tiles. WEGA turntable presses cut energy use by over 70% versus older hydraulic units. Service items include clamping hardware, seals, and wear plates.

  • NOVA III: 400 t force, 180 t lateral
  • Drum widths 2,000 mm and 2,400 mm
  • Up to 4 large tiles (8 per m²)
  • WEGA: >70% energy saving drive

MSW Die Changer, Circular Feeders, EF & IP²

ZMB Braun MSW quick-change die loading cuts extruder die swaps from 30 to 5 minutes using hydraulic wedges. HÄNDLE also builds circular screen feeders, EF refractory extruders, and the IP² pilot plant. Wear parts include composite scraper plates and PTA-hardfaced liners.

  • MSW: approx. 5 min hydraulic die swap
  • EF series: refractory mass extruders
  • IP²: mobile modular pilot test plant
  • PTA tungsten-carbide hard-faced parts

Complete Clay Preparation & Shaping Lines

HÄNDLE supplies complete heavy-clay preparation and shaping machinery including Futura II de-airing extruders (24 to 65 bar), Alpha II and Beta fine roller mills, Duo and Quadro pan mills, MDSG/MDG screen mixers, BKN/BKSS box feeders, and Nova III roof tile presses.

Reference plant layouts integrate BKN 1206c / BKNG 1206c box feeders, WMM 416b or WMH 818a roller crushers, Alpha II WFZH 10120d / Beta WF 10120e fine roller mills, HMIQ 2170c Quadro pan mills, and Futura II units (MDVG 920f + E56a/50).

Fine Grinding, Pan Milling & Screen Mixing

Alpha II hydraulic fine roller mills operate down to a 0.5 mm gap at up to 79 m³/h, while Beta mills achieve 0.8 mm gaps and up to 132 t/h wet at 20 m/s peripheral velocity.

Duo and Quadro wet pan mills perform two-stage comminution (Quadro delivers 1.8× capacity with four balanced runners), paired with MDSG hydraulic-shift or MDG stationary double-shaft screen mixers for impurity removal.

Extrusion, Roof Tile Pressing & Wear Engineering

FUTURA II modular units (200–750 mm barrels, up to 65 bar) and EF refractory extruders serve heavy clay, refractories, and fiber cement, complemented by 400-ton NOVA III roof tile presses and WEGA turntable presses (>70% energy saving).

ZMB Braun MSW quick-change die loading cuts die changeover to ~5 minutes, and over 6,500 wear items including PTA tungsten-carbide hard-faced parts sustain continuous operation.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.