HANBELL / Hanbell Precise Machinery Compressors & Vacuum Pumps

Industrial screw refrigeration compressors (RC2, RE, LT-S, RH, RG, EX), high-temp heat pumps (RC2-G/T), screw air ends and compressors (AA/AB/AD, AA6/AE6, SAM), and vacuum pumps (PS, PD, iPH, IPM, PX, PZ).

RC2, RC2-E, and RE Semi-Hermetic Screw Compressors

HANBELL RC2, RC2-E, and RE semi-hermetic screw compressors use a patented 5-to-6 rotor profile with over 40 motor A/B configurations. They serve industrial chillers and HVAC plants up to 1527 m3/h at 50 Hz on R134a and R407C. Wear items include oil filters, seals, sensors, and valves.

  • RC2: 40+ models, up to 1527 m3/h at 50 Hz
  • RC2-E: 17 R134a models (300–1539 m3/h)
  • Patented 5-to-6 asymmetric screw rotor
  • Parts: oil filters, flow switches, valves

LT-S, RH (CO2), RG (Ammonia), and EX Explosion-Proof Series

HANBELL LT-S (-L/-V/-IVX), LBII-PLUS, RC2-D, open-type RG (R717/hydrocarbons), CO2 RH, and ExdIIBT4 EX compressors cover down to -65 C. They operate in blast freezers, petrochemical, and low-temperature refrigeration plants. Service parts include shaft seals, bearings, and valves.

  • LT-S two-stage & VFD: -60 to -65 C evap.
  • RG open-type: R717/HC, Vi 2.6–5.6, SKF
  • RH for R744 (CO2) >30 bar; EX ExdIIBT4 rated
  • Parts: John Crane seals, bearings, tubes

RC2-G/T, LT-S-H(A), and RC2-PLUS Heat Pump Compressors

HANBELL RC2-G (up to 85 C on R134a), ultra-high RC2-T (up to 125 C on R245fa), LT-S-H(A), and low-ambient RC2-PLUS (down to -40 C) compressors target heat pumps. They enable industrial waste heat recovery, steam generation, and district heating. Spares cover filters, valves, and sensors.

  • RC2-G (R134a): condensing temp up to 85 C
  • RC2-T (R245fa): up to 125 C direct steam
  • RC2-PLUS: 6 models, suction down to -40 C
  • Parts: EEVs, check/stop valves, oil filters

AA, AB, AD, PM Screw Air Ends and AA6/AE6 Air Compressors

HANBELL screw air ends (AA, AB, AC, AD, two-stage BX, and coaxial PM series) and AA6/AE6 compressors span 5.5 to 160+ kW at 5–35 bar.g. They supply industrial air networks in powder, chemical, and manufacturing plants. Spares cover intake valves, separators, oil filters, and sensors.

  • Single-stage AA/AB/AC/AD: 7.5–160+ kW
  • Two-stage BX: 11.4–45 m3/min, 5–35 bar.g
  • Coaxial PM air ends (7.5–75 kW), AE6/AA6
  • Parts: separators, intake & min-press. valves

Oil-Free Scroll Air Ends (3.7 & 5.5 kW) and SAM Compressors

HANBELL oil-free scroll air ends (3.7 kW and 5.5 kW) and SAM compressors deliver 340 to 600 L/min at 8 to 10 bar with zero oil in compression chambers. They serve medical gas, dental, food, and laboratory air lines. Service items include tip seals, filters, and cooling fans.

  • 3.7 kW scroll end: 340–402 L/min, 8–10 bar
  • 5.5 kW scroll end: 440–600 L/min, 2500–3000 rpm
  • 100% oil-free compression, integral cooling fan
  • Parts: sealing strips, intake filters, bearings

PS, PD, iPH, IPM, PMF Dry Screw and PX/PZ Rotary Vane Vacuum Pumps

HANBELL dry screw vacuum pumps (PS, PD, iPH, IPM) and rotary vane series (PX, PZ) cover 4 to 1850 m3/h down to 7.5e-4 Torr. They handle lithium-battery drying, solar, coating, and harsh semiconductor etch processes. Spares include seals, bearings, timing gears, and check valves.

  • iPH100–1820: 120–1850 m3/h, 7.5e-4 Torr
  • PD: <=0.01 mbar / 1 Pa, ATEX option
  • PX (10–630 m3/h), PZ (4–90 m3/h @ 50 Hz)
  • Parts: shaft seals, timing gears, check valves

Selecting HANBELL Refrigeration, Low-Temp, and Heat Pump Screw Compressors

Shanghai Hanbell Precise Machinery Co., Ltd.

(established in 1996, SZSE-listed in 2007; parent company founded in Taiwan in 1994) engineers over 40 semi-hermetic RC2 screw compressor models with A and B motors up to 1527 m3/h at 50 Hz, alongside water-cooled R134a RC2-E (300–1539 m3/h) and 5-to-6 rotor RE series.

Low-temperature duties down to -65 C use compound two-stage LT-S (-L/-V/-IVX) and LBII-PLUS models, R744 (CO2) RH compressors above 30 bar, open-type RG units (R717/R290, John Crane seals, SKF bearings), and ExdIIBT4-rated EX compressors.

For industrial waste heat recovery and high-temperature hot water or steam generation, HANBELL supplies RC2-G (condensing to 85 C on R134a), RC2-T (up to 125 C on R245fa), two-stage LT-S-H(A), and low-ambient RC2-PLUS air-source heat pump compressors operating down to -40 C suction saturation temperature.

Selecting HANBELL Air Ends, Compressors, Oil-Free Scroll, and Vacuum Pumps

Compressed-air OEMs and factories integrate single-stage AA, AB, AC, AB+, AA-H, and AB-L screw air ends (7.5–160+ kW at 8 bar.g), space-saving AD integrated air ends with built-in separator and valves, two-stage BX blocks (11.4–45 m3/min up to 35 bar.g), coaxial permanent-magnet AB-PM/AC-PM blocks (7.5–75 kW), and packaged AE6 (5.5–37 kW) or AA6/AA6-AM compressors.

Oil-free 3.7 kW and 5.5 kW scroll ends and SAM compressors deliver 340–600 L/min at 8–10 bar for medical and food lines.

Process vacuum lines employ PS fixed-pitch and PD variable-pitch dry screw pumps (down to <= 0.01 mbar / 1 Pa, ATEX options), harsh-duty iPH (120–1850 m3/h, 7.5e-4 Torr with booster), IPM (100–600 m3/h), PMF, and PA META VFD systems, plus PX single-stage (10–630 m3/h) and PZ double-stage (4–90 m3/h at 50 Hz) rotary vane vacuum pumps.

Hanbell Precise Machinery and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Hanbell Precise Machinery and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.