Zenit Italia (Zenit) Submersible Pumps, Mixers & Lifting Stations
Industrial and municipal submersible electric pumps, mixers, aeration diffusers, prefabricated lifting stations, and OEM wear parts from Zenit Italia (Zenit).
UNIQA Heavy-Duty Pumps (ZUG V / OC / CP / GR / HP)
Zenit UNIQA pumps pair EN 60034-30 IE3 motors (1.1–250 kW) with closed-circuit cooling for S1 duty in wet or dry pits. Hydraulics cover vortex, channel with ACS, chopper, grinder, and high-head duties. Dual SiC seals, oil lifter, and moisture probes guard the shaft.
- Power 1.1–250 kW, 2/4/6/8 poles
- Flow up to 1240.0 l/s, head 100.3 m
- AISI 431 or AISI 329 duplex shaft
- ATEX II 2G Ex db h IIB T4 Gb option
Grey Industrial & Civil Pumps (DGG / DRG / CTG / GRG / APG)
Zenit Grey pumps deliver 0.55–18.5 kW across vortex (DGG), channel (DRG), chopper (CTG), grinder (GRG), and high-head (APG) hydraulics. EN-GJL-250 iron bodies and GJL-600 or chromium-steel cutters process fibrous sewage. Two SiC-SiC seals sit in an inspectable oil chamber with leakage detection.
- Power 0.55–18.5 kW (50/60 Hz)
- Flow up to 205.3 l/s, head up to 59.5 m
- EN-GJL-250 & GJL-600 chopper parts
- Inspectable 2SiC oil chamber + probe
Special Alloy X-B-Y Pumps (DGX / DRX / DRY / DGB / DRB)
Zenit Special Alloy pumps serve chemical, pharmaceutical, brine, and marine duties where standard iron corrodes. ASTM A351 CF8M (AISI 316) DGX/DRX/DRY units handle pH 3–14 with Viton gaskets, while aluminum-bronze DGB/DRB handle pH 5–11. Oil-bath motors incorporate AISI 316 shafts and 2SiC seals.
- AISI 316 (pH 3–14) or Al-bronze (pH 5–11)
- Power 0.37–15.0 kW, flow up to 72.8 l/s
- AISI 316 shaft, Viton or NBR gaskets
- Dual 2SiC seals, DAC-R / DAC-X couplers
O Series & E-S Compact Industrial Pumps
Zenit O Series (DGO vortex, DRO channel, 0.37–1.5 kW) pairs an oil-bath motor with EN-GJL-250 iron construction for easy overhaul. E-S Series (0.9–1.7 kW) fits small pits with three-blade GRE/GRS grinders or high-head APE/APS impellers. Shafts use SiC plus Al-graphite or lip seals.
- O Series: 0.37–1.5 kW, up to 80 mm passage
- E-S Series: 0.9–1.7 kW, head up to 27.6 m
- Three-blade rotary knife & perforated plate
- SiC + alumina-graphite or lip shaft seals
bluePRO, Blue, E & Steel Submersible Pumps
Zenit bluePRO pumps (0.37–1.5 kW) pair EN-GJL-250 bodies, priming breathers, and 50 mm free passage for blueBOX tanks. E, Blue, and AISI 304 Steel units (5 mm floor suction) cover sump and drainage duties. Wear parts include 2SiC seals, impellers, strainers, and cable glands.
- bluePRO: 0.37–1.5 kW, up to 758 l/min
- Steel: AISI 304 body & impeller, 5 mm sump
- E Series: bolted dismantleable iron body
- 2SiC / SiC-Al seals, V-rings, float switches
ZM Submersible Mixers (ZMD / ZMR) & Flow-Maker PR
Zenit ZMD direct-drive mixers (0.75–4.5 kW, 1450–750 rpm, 155–1060 N thrust) and geared ZMR units (3–7.5 kW) run equalization and denitrification basins. Flow-Maker PR pairs iron bodies with stainless propellers. IE3 motors, ATEX options, and guide-rail hoists simplify service.
- ZMD: 0.75–4.5 kW, Ø 200/300/400 mm props
- ZMR reduction gear: 3–7.5 kW, 4/6 poles
- Flow-Maker PR with stainless steel blades
- IE3 motors & ATEX II 2G Ex db h IIB T4 Gb
Oxyplate, Oxytube, Oxyinox & Jetoxy Aeration Systems
Zenit aeration lines cover 9" and 12" Oxyplate disc diffusers, Oxytube 500–1000 mm tubular diffusers, Oxyinox L305–L610 coarse-bubble units, and Jetoxy Venturi aerators. Jetoxy 50 (0.37–1.5 kW) and 80–300 (3–30 kW) install without draining tanks and use replaceable Vulkollan polyurethane diaphragms.
- 9"/12" Oxyplate & 500–1000 mm Oxytube
- Jetoxy 50 (0.37–1.5 kW) & 80–300 (3–30 kW)
- Replaceable Vulkollan ejector diaphragm
- Oxyinox L305–L610 coarse-bubble diffusers
BlueBOX & LiftBOX Stations, DAC Couplers & Controls
Zenit polyethylene lifting stations span BlueBOX (60–500 L, EN 12050-1/2) and underground LiftBOX S/M/L (650–19 000 L, DN50–DN150). Accessories cover DAC-V/H/E bottom couplers, FLX flushing valves, check/gate valves, 4–20 mA probes, MAC 3 floats, and control panels.
- BlueBOX (60–500 L) & LiftBOX (1000–19000 L)
- DAC-V / DAC-H / DAC-E automatic couplers
- FLX tank flushing valves & 90° bend unions
- 4–20 mA level sensors, MAC 3 & panels
Selecting Zenit UNIQA, Grey & Special Alloy Submersible Pumps
Zenit Italia UNIQA heavy-duty pumps (1.1–250 kW, 2/4/6/8 poles) use EN 60034-30 IE3 motors and an internal closed-circuit cooling system for continuous S1 operation in wet pits or dry chambers.
Hydraulic options cover ZUG V vortex (up to 150 mm free passage), ZUG OC open channel with ACS anti-clogging groove (up to 1240.0 l/s and 100.3 m head), ZUG CP chopper, ZUG GR grinder, and ZUG HP high-head pumps, with ATEX/IECEx configurations.
For civil and industrial duties from 0.55 to 18.5 kW, the Grey series pairs EN-GJL-250 iron bodies, GJL-600 CTG cutters, and inspectable dual SiC-SiC seal chambers with moisture sensors.
Aggressive chemical, pharmaceutical, and marine media are served by Special Alloy X-B-Y pumps in ASTM A351 CF8M (AISI 316, pH 3–14, Viton) and aluminum-bronze (pH 5–11, NBR).
Mixers, Aeration Systems, Lifting Stations & Spare Components
Wastewater equalization and denitrification basins utilize Zenit ZM direct-drive (ZMD 0.75–4.5 kW, 155–1060 N thrust) and geared (ZMR 3–7.5 kW) mixers alongside Flow-Maker PR units with stainless steel propellers.
Oxygen transfer is supported by Oxyplate 9"/12" disc diffusers, Oxytube 500–1000 mm tubular diffusers, Oxyinox L305–L610 units, and Jetoxy submerged Venturi aerators with replaceable Vulkollan diaphragms.
Prefabricated polyethylene lifting stations include BlueBOX (60–500 L, EN 12050-1/2 compliant, 4–20 mA probe) and underground LiftBOX S/M/L (650–19 000 L, DN50–DN150).
Spare wear components—dual SiC seals, V-rings, AISI 431/329/316 shafts, bearings, impellers, cutters, DAC couplers, and FLX flushing valves—are matched by pump nameplate data.
Zenit Italia and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Zenit Italia and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Zeilfelder Pumpen
- Equipment and parts for Stallkamp / Erich Stallkamp ESTA
- Equipment and parts for STAMO
- Equipment and parts for Hans Sasserath / SYR
Documents and sources
- Zenit Group Official Portal — Product Overview
- Zenit Italia Production Unit (San Cesario sul Panaro)
- Zenit Group History — Italy and China Facilities
- Zenit China Official Portal (Chinese)
- Zenit UNIQA Industrial Submersible Pumps Series
- Zenit Grey Professional & Industrial Pumps Series
- Zenit Special Alloy X-B-Y Submersible Pumps Series
- Zenit O Series Oil-Bath Submersible Pumps
- Zenit E-S Compact Submersible Pumps Series
- Zenit bluePRO Heavy-Duty Submersible Pumps
- Zenit Steel AISI 304 Submersible Pumps
- Zenit Blue Submersible Pumps Series
- Zenit E Series Dismantleable Cast Iron Pumps
- Zenit ZM High-Efficiency Submersible Mixers
- Zenit Mixing Systems (ZM & Flow-Maker PR)
- Zenit Aeration Systems & Air Diffusers
- Zenit Jetoxy Submerged Venturi Aerators
- Zenit LiftBOX Industrial Lifting Stations
- Zenit BlueBOX Lifting Stations
- Zenit Prefabricated Lifting Stations Range
- Zenit Hydraulic & Electrical Accessories
