QKL / Kao Lu Electronic Proportional Regulators and Flow Control Valves
Sizing and export quotation for QKL / Kao Lu (Kao Lu Enterprise / Genn Dih) proportional pressure, vacuum, and flow controllers (QKL-B1T, B1S, B3, B3-A, B4H, B3V, QKL-HS, FC-3000, PPV) with 0–10V, 4–20mA, and RS485.
Low-Pressure Regulators QKL-B1T, QKL-B1TR and QKL-B4HR
QKL-B1T closed-loop PID regulators control 0–2, 0–4, and 0–8 bar at 4–13 L/min with 0.0005 bar resolution. QKL-B1TR and QKL-B4HR reach ±0.005% F.S. step control via a 0.1 mm bleed orifice. Built for microfluidics, dispensing, and low-pressure leak testing.
- Output 0–2 / 0–4 / 0–8 bar (B1TR: 2/5/10 bar)
- Input & monitor: 0–10V, 4–20mA, RS485 Modbus
- Port PT 1/8", DC 24V, M12 connector, IP65
- Dual solenoid valves, pressure sensor, PCB
High-Flow Regulators QKL-B3, QKL-B3-A and QKL-B1H
QKL-B3 pairs dual solenoids with an internal volume booster for up to 1200 L/min at 0–8 bar and 0.1–0.25% accuracy. Economic QKL-B3-A (B3-AI) delivers 940 L/min at 7 bar for laser cutting. QKL-B1H reaches 5600 L/min at 8 bar for large chambers.
- Flow up to 1200 L/min (B3) / 5600 L/min (B1H)
- QKL-B3-A (B3-AI): 0–7 bar, G1/4", ±1% F.S.
- Input: 0–10V, 4–20mA, RS485, DC 24V <=4W
- Internal volume booster, solenoids, M12 lead
Medium-Pressure Regulators QKL-B1S and QKL-B3H (0–30 bar)
QKL-B1S regulates 0–30 bar (34 bar max inlet) at 40 L/min with 5 mV resolution for gauge calibration and leak testing. QKL-B3H delivers up to 6000 L/min at 30 bar with 0.5 s response for blow molding. Both support external pressure sensor feedback.
- Output 0–30 bar (435 psi), max inlet 34 bar
- B1S: 40 L/min (PT 1/8"); B3H: 6000 L/min (G3/8")
- Command 0–10V, 4–20mA, RS485, DC 24V supply
- High-pressure solenoids, transducer, NBR seals
High-Pressure Regulators QKL-B4H (0–60 and 0–70 bar)
QKL-B4H-P60 and B4H-P70 control 0–60 and 0–70 bar (74 bar max supply) at up to 170 L/min. With ±0.25% F.S. accuracy and 200 ms response, they serve test rigs, MOCVD, and physical foaming. Rated for -196 to +70 °C across inert gases and compressed air.
- Output 0–60 / 0–70 bar (max supply 74 bar)
- Flow up to 170 L/min, ±0.25% F.S. accuracy
- 200 ms response, temp range -196 to +70 °C
- 0–10V / 4–20mA / RS485, 1/8" PT, IP65, 800 g
Electronic Vacuum Regulators QKL-B3V, QKL-HS1V and B4HV
QKL-B3V electronic vacuum regulators control negative pressure from 0 to -101 kPa at 250–600 L/min via dual solenoid valves, internal sensor feedback, and IP65 M12 protection. QKL-HS1V, HS2V, and B4HV extend control from -101 to +900 kPa up to 900 NI/min.
- Vacuum 0 to -101 kPa (HS2V: -101 to +900 kPa)
- Flow 250–600 L/min (B3V) / 900 NI/min (HS2V)
- Accuracy ±0.5% F.S. (B3V) / ±0.2% F.S. (HS1V)
- Dual solenoids, vacuum sensor, G1/4", IP65
High-Speed 3/2 Proportional Regulators QKL-HS0, HS1 and HS2
QKL-HS 3/2 directly actuated seating regulators combine a proportional solenoid, pressure transducer, and programmable electronics for fast pressure switching up to 100 bar. Flow reaches 11,000 NI/min with <0.1% FS linearity, supporting air, hydrogen, and oxygen.
- Pressure up to 0–50 bar (HS0/1) and 0–100 bar (HS2)
- Flow up to 11,000 NI/min @ 30 bar, <0.1% FS
- Signals: 0–10V, 4–20mA, RS485, IO-Link option
- Proportional solenoid, refined spool, FKM/FFKM
Flow Control Valves FC-3000, KLPV and QKL-CLC Controller
Stepper-driven FC-3000 needle valves modulate 0–5000 L/min air or 0–94 L/min water across -1 to 20 bar with ±0.1% F.S. repeatability. KLPV proportional solenoids cover 0–300 L/min with PWM tuning. QKL-CLC adds 12-bit PID closed-loop control via RS485.
- FC-3000: 0–5000 L/min air, 0–94 L/min water
- Pressure -1 to 20 bar, PT 1/2", Viton or FFKM
- KLPV solenoid: 0–32 / 140 / 300 L/min via PWM
- QKL-CLC: 12-bit PID, 0–5V, 4–20mA, RS485
Proportional Pinch Valves PPV with PM Stepper Driver
PPV-04, PPV-06, and PPV-08 proportional pinch valves modulate flow or pressure by squeezing flexible tubing (3.5–9 mm O.D., heavy-duty up to 1" O.D.) with zero fluid contact. Built for clinical analyzers, dosing, and bioprocessing. Driven by PM controllers over 0–10V, 4–20mA, or RS485.
- PPV-04 (3.5–4.5 mm), PPV-06 (5.5–7 mm), PPV-08 (7–9 mm)
- High-torque versions support tubing up to 1" O.D.
- PM driver: 0–10V, 4–20mA, or RS485 Modbus input
- Non-contact sterile pinching, quick tube slot
Closed-Loop Architecture of QKL / Kao Lu Regulators
Kao Lu Enterprise Co., Ltd. / Genn Dih Enterprise Co., Ltd. (founded in 1980 in Taichung, Taiwan) builds QKL electronic proportional regulators around dual inlet/exhaust solenoid valves, an internal or external pressure transducer, and a high-speed PID microprocessor board.
For high-flow dynamic lines, QKL-B3, QKL-B1H, and QKL-B3H integrate internal volume boosters, while QKL-HS 3/2 direct-acting seating valves support air, hydrogen, and oxygen up to 100 bar.
Selecting Pressure Range, Flow Capacity and PLC Interfaces
Model selection starts with target pressure (from -101 kPa vacuum on QKL-B3V up to 70 bar on QKL-B4H or 100 bar on QKL-HS2), required ANR flow rate, port threading (PT 1/8", G1/4", G3/8", PT 1/2"), and wetted materials.
Control and feedback options cover 0–10 VDC, 4–20 mA, RS485 Modbus, and IO-Link over 24 VDC with IP65 M12 cabling. Clean dry compressed air filtered to 5 um is recommended for long-term stability.
QKL / Kao Lu and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of QKL / Kao Lu and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Boule Diagnostics
- Equipment and parts for Zeilfelder Pumpen
- Equipment and parts for Vieworks / Vieworks X-ray Imaging
- Equipment and parts for Vieworks / Vieworks X-ray Imaging
Documents and sources
- Kao Lu / Genn Dih — Official Manufacturer Website
- Kao Lu — About Us (Established 1980)
- Low Pressure Proportional Regulators QKL-B1T, QKL-B3, QKL-B3-A (0–8 bar)
- Low Pressure High Flow Digital Regulator QKL-B1H (0–8 bar, 5600 L/min)
- Ultra High Resolution Regulators QKL-B1TR and QKL-B4HR
- Medium Pressure Proportional Regulators QKL-B1S and QKL-B3H (0–30 bar)
- High Pressure Proportional Regulator QKL-B4H (0–70 bar)
- Electronic Vacuum Regulator QKL-B3V (0 to -101 kPa)
- High Speed 3/2 Proportional Regulators QKL-HS0, HS1, HS2
- Proportional Flow Control Valves KLPV and FC Series
- Stepper-Controlled Proportional Valve FC-3000 (0–5000 L/min)
- Closed-Loop PID Controller QKL-CLC
- Proportional Pinch Valves PPV
- Kao Lu Enterprise Co., Ltd. — Traditional Chinese Site
- Kao Lu / Genn Dih — Simplified Chinese Site
