ZPM Zahnradpumpenfabrik Mannheim Gear Pumps, Heat Exchangers & Filters

External gear pumps (NN, N, L, NE, ND, MANA, EP, FU, WHV, Nb, HW3), TEMA shell-and-tube heat exchangers, duplex oil filters, and custom oil supply units engineered in Mannheim since 1904.

Series NN and N low-pressure pumps

Series NN (8–1,056 l/min, up to 16 bar) and N (8–700 l/min, up to 16 bar) transfer mineral oils and self-lubricating fluids at 70–2,500 mm²/s without abrasives. Helical gears in gray iron, steel, or stainless steel. Replaceable mechanical seals, bearing bushings, and relief valves.

  • Flow: 8–1,056 l/min
  • Pressure: up to 16 bar
  • Viscosity: 70–2,500 mm²/s
  • Options: A/F, H, U, R, WD

Series L and 050 high-pressure pumps

Series L precision gear pumps cover 4 to 603 l/min at continuous pressures up to 60 bar and brief peaks to 125 bar, while compact series 050 handles 2 to 45 l/min up to 30 bar. Both serve 30–2,500 mm²/s fluids. Replaceable rotary shaft seals, lapped covers, and gear pairs.

  • Series L: 4–603 l/min, 60/125 bar
  • Series 050: 2–45 l/min, 30 bar
  • Viscosity: 30–2,500 mm²/s
  • Single or double pump units

Series NE and ND high-flow pumps

Series NE (735–1,950 l/min) and triple-bearing series ND (990–2,520 l/min) operate up to 10 bar at 70–2,500 mm²/s. Series ND integrates middle bearings and a combined start-up and flow control valve. Service parts cover composite bearing inserts, packing, mechanical seals, and gears.

  • Series NE: 735–1,950 l/min
  • Series ND: 990–2,520 l/min
  • Pressure: up to 10 bar
  • Triple-bearing shafts (ND)

Series MANA and EP viscous and chemical pumps

Slow-running MANA pumps handle 3–2,250 l/min at 2,500–38,000 mm²/s (special up to 300,000 mm²/s) and up to 16 or 30 bar. Stainless steel EP pumps deliver 8–53 l/min up to 16 bar for low-lubricity chemical and food media. Replaceable bearing inserts, gears, and seals.

  • MANA: 2,500–300,000 mm²/s
  • EP: stainless, 8–53 l/min
  • Pressure: up to 16 / 30 bar
  • Straight, helical, or V-gears

Series FU, WHV, Nb and hand pump HW3

Tank-mounted FU and reversible WHV pumps deliver 10–750 l/min up to 10 bar directly on gearboxes and tanks. Vertical immersion Nb pumps (150–600 l/min, up to 6 bar) include a check valve and strainer; HW3 hand pumps supply 0.32 l/rev up to 3 bar. Spare valves, strainers, and packings.

  • FU / WHV: 10–750 l/min, 10 bar
  • Nb immersion: 150–600 l/min
  • HW3 hand pump: 0.32 l/rev
  • Non-magnetic brass HW3 option

Shell-and-tube heat exchangers

ZPM manufactures about 128,000 shell-and-tube heat exchanger variants per TEMA and DIN 28183 across 0.2–950 m², up to 300 bar and 350 °C. Vertical, horizontal, and switchable double units in steel, stainless, and copper alloys (AEL–NEN). Spare tube bundles, chambers, and gaskets.

  • Surface: 0.2–950 m²
  • Rating: up to 300 bar, 350 °C
  • Series: AEL–AEW, BEL–BEW, NEN
  • Codes: TEMA, AD 2000, API 614

Simplex and duplex oil filters

ZPM simplex (AF, AFU) and switchable duplex oil filters (DFN, DFU, UMSFD, AFUD-R) operate up to 4,000 l/min, 16 bar, and 120 °C with 25 to 130 µm filtration fineness. Options include magnetic rods and mechanical or electrical clogging indicators. Replaceable star and disc screen elements.

  • Flow: up to 4,000 l/min
  • Pressure: up to 16 bar, 120 °C
  • Fineness: 25–130 µm
  • Star screens and disc packs

Oil supply systems and pump aggregates

Custom oil supply systems for turbine bearings, gearboxes, and plastic extruders reach 1,700 l/min, 1,000 kW heat output, 20 m³ tank volume, and 20 t weight, alongside standardized aggregate groups 1 to 6. Spare couplings, safety valves, heaters, flow meters, and level sensors.

  • Flow: up to 1,700 l/min
  • Heat output: up to 1,000 kW
  • Tank: up to 20 m³, 20 t max
  • Aggregate groups 1, 3, 4, 5, 6

Engineering heritage of ZPM Zahnradpumpenfabrik Mannheim

Founded in 1904 in Mannheim by Friedrich August Neidig, renamed ZPM Zahnradpumpenfabrik Mannheim GmbH in 1979, and strengthened by the 2015 integration of Gerberich, the German manufacturer engineers more than 1,500 external gear pump configurations and 128,000 shell-and-tube heat exchanger variants.

Standard gear pump ranges cover 2 to 4,000 l/min up to 125 bar, MANA viscous pumps reach 300,000 mm²/s, filters handle up to 4,000 l/min, and turnkey oil supply units reach 1,000 kW heat rejection.

Selection matrix for pumps, coolers, filters, and units

Pump selection relies on series (NN, N, L, NE, ND, 050, MANA, EP, FU, WHV, Nb, HW3), fluid viscosity, mounting type (foot A, flange F, immersion), shaft seal (mechanical, rotary, packing), heating jacket H, and shuttle valve inserts WD for reversing drives.

Shell-and-tube heat exchangers (AEL–AEW, AFL–AFW, BEL–BEW, BFL–BFW, NEN–NFN) are designed per TEMA, DIN 28183, AD 2000, EN 13445, ASME VIII Div. 1, and API 614/618/660 with switchable duplex redundancy.

ZPM Zahnradpumpenfabrik Mannheim and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of ZPM Zahnradpumpenfabrik Mannheim and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.