Wright Flow Technologies / Viking Pump Hygienic Equipment
Technical sizing and specifications for Wright Flow Technologies / Viking Pump Hygienic positive displacement pumps: TRA 10 and TRA 20 circumferential piston series, SteriLobe and Classic+ / MultiPump rotary lobe lines, Revolution replacements, and RTP / RTPE tanker pumps.
TRA 10 Series Hygienic Circumferential Piston Pumps
TRA 10 circumferential piston pumps handle flows up to 450 GPM (102 m³/h) and pressures up to 400 psi (27 bar) with non-galling WFT 808 alloy rotors and drop-in-place interchangeability. Built to 3-A standards for dairy and meat up to 200,000 cSt with 17-4 PH shafts.
- Flow: up to 450 GPM (102 m³/h)
- Pressure: up to 400 psi (27 bar)
- Models: TRA10/0060 to 3200
- Rotors: non-galling WFT 808 alloy
TRA 20 Series High-Pressure Circumferential Piston Pumps
TRA 20 series pumps handle dairy, bakery, and meat media up to 200,000 cSt and 150 °C at 500 psi (34 bar). CIP construction uses rotor O-rings and stainless bearing retainers. Spares cover WFT 808 rotors, 17-4 PH shafts, and flushed mechanical seals.
- Flow: up to 450 GPM (102 m³/h)
- Pressure: up to 500 psi (34 bar)
- Models: 60–3200 (incl. 1800, 2100)
- Sealing: single/double mechanical
SteriLobe Series Hygienic Rotary Lobe Pumps
SteriLobe rotary lobe pumps serve pharma, food, and beverage lines up to 753 GPM (171 m³/h) and 218 psi (15 bar) at 150 °C. Multi-lobe rotors lower shear and pulsation, while cover reliefs aid CIP/SIP draining and front-loading seals service in-line.
- Flow: up to 753 GPM (171 m³/h)
- Pressure: up to 218 psi (15 bar)
- Models: SLAS to SLGL (0.75–6 in)
- Maintenance: in-line front-load seals
Classic+ / MultiPump Series Modular Rotary Lobe Pumps
MultiPump (Classic+) modular rotary lobe pumps deliver up to 462 GPM (105 m³/h) at 174 psi (12 bar) with timed non-contacting rotors for CIP and COP service. Helical gears and tapered bearings serve pharma and foods. Spares cover seals, feet, and gears.
- Flow: up to 462 GPM (105 m³/h)
- Pressure: up to 174 psi (12 bar)
- Models: MP10 to MP40 (1–4 in ports)
- Rotors: timed non-contacting
Revolution Series Legacy Pumps & TRA 10 Replacement
Revolution models (R0150X to R2630P) handle up to 399 GPM (91 m³/h), 450 psi (31 bar), and 440,000 cSt with jacketed covers. Viking Pump Hygienic replaced this line with TRA 10 equivalents. Shaft sleeves, flushed seals, and O-rings remain serviceable.
- Flow: up to 399 GPM (91 m³/h)
- Pressure: up to 450 psi (31 bar)
- Viscosity: up to 440,000 cSt
- Status: replaced by TRA 10 series
RTP & RTPE Series Road & Chemical Tanker Pumps
RTP20 and RTP30 pumps unload HFCS, chocolate, and dairy tankers up to 338 GPM (76.8 m³/h) at 174 psi (12 bar). RTPE20 models transfer caustics up to 264 GPM (60 m³/h) with dry-run composite FFKM/PTFE or FKM seals and sealed long-life gearboxes.
- RTP: up to 338 GPM, 174 psi (12 bar)
- RTPE20: up to 264 GPM, 145 psi (10 bar)
- RTPE temp: -17 to +110 °C
- Drive: close-coupled SAE hydraulic
Circumferential Piston vs. Rotary Lobe Pump Selection
Choose TRA 10 (up to 400 psi / 27 bar) or TRA 20 (up to 500 psi / 34 bar) circumferential piston pumps when high differential pressure, tight internal clearances with non-galling WFT 808 alloy rotors, and single-piece 17-4 PH shafts are required for viscous dairy, meat, or bakery media.
Select SteriLobe (up to 753 GPM / 171 m³/h) or Classic+ / MultiPump rotary lobe pumps for pharma, biotech, and food lines requiring non-contacting low-shear rotors, self-draining cover profiles, and in-line front-loading mechanical seals.
Hygienic Compliance, Materials & Tanker Unloading
Viking Pump Hygienic (formerly Wright Flow Technologies, manufactured in Cedar Falls, USA and Eastbourne, UK) builds 316L stainless steel wetted ends conforming to 3-A Sanitary Standards, CE 2006/42/EC, and ATEX requirements.
For road tanker transfer, RTP20 and RTP30 handle HFCS, chocolate, and dairy up to 338 GPM (12 bar), while RTPE20 handles caustics and corrosives from -17 to +110 °C using dry-run composite FFKM/PTFE or FKM O-ring seals.
Revolution Series Supersession & Porting Options
Legacy Revolution models (R0150X through R2600P) are officially superseded by TRA 10/0180 through TRA 10/2200 equivalents, maintaining flow and pressure capability while standardizing spare parts across hygienic lines.
Porting configurations across the hygienic portfolio cover Tri-Clamp, DIN 11851, SMS, Camlock, ASME/ANSI 150/300 lb flanges, and rectangular hopper inlets for ultra-viscous pastes.
Wright Flow Technologies / Viking Pump Hygienic and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Wright Flow Technologies / Viking Pump Hygienic and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for VC999 Verpackungssysteme
- Equipment and parts for Woywod / PLASTICOLOR
- Equipment and parts for WOYO Compressor
- Equipment and parts for WOTAN Technisches Büro
Documents and sources
- Viking Pump Hygienic Official Division (Formerly Wright Flow Technologies)
- TRA 10 Series Circumferential Piston Pumps — Official Specifications
- TRA 20 Series High-Pressure Circumferential Piston Pumps — Official Specifications
- SteriLobe Series Hygienic Rotary Lobe Pumps — Official Specifications
- MultiPump (Classic+) Series Modular Rotary Lobe Pumps — Official Specifications
- Revolution Series Pumps & TRA 10 Replacement Cross-Reference
- RTP Series Hygienic Road Tanker Pumps — Official Specifications
- RTPE Series Chemical Tanker Rotary Lobe Pumps — Official Specifications
