Scintra / Shenzhen Scintra — Precision CNC Machining & Custom Extrusions
Custom CNC milled, turned, Swiss-machined parts and extruded aluminum profiles from Scintra (Shenzhen Scintra, est. 2009). ISO 9001 quality control, tolerances down to ±0.005 mm, and CMM inspection from prototype to batch production.
3/4/5-Axis CNC Milling
Scintra 3-axis, 4-axis, and 5-axis CNC milling centers produce housings, brackets, base plates, frames, and heat sinks from metals and plastics. Multi-face pockets, slots, contours, and tapped holes are machined in one setup. Tolerances follow ISO 2768-f down to ±0.005 mm.
- Axes: 3-axis, 4-axis, and 5-axis milling
- Tolerance: ISO 2768-f; ±0.005 mm critical
- Parts: housings, brackets, plates, frames
- CAD: STEP, STP, IGS, X_T, 2D PDF
CNC Turning
Scintra CNC turning centers manufacture drive shafts, bushings, bearing sleeves, spacers, flanges, and threaded fittings from prototype to repeat batches. Operations cover OD/ID turning, boring, facing, grooving, and threading. Critical concentricity features hold up to ±0.005 mm.
- Processes: OD/ID turning, boring, grooving
- Threads: Metric, UNC/UNF, BSP, custom
- Parts: shafts, bushings, sleeves, spacers
- Inspection: micrometers, plug & thread gauges
Swiss CNC Machining
Guide-bushing Swiss CNC lathes process bar stock from 0.5 to 32 mm for long, slender pins, micro shafts, connectors, and threaded fittings with minimal deflection. Live tooling machines cross holes and flats in one cycle. Typical tolerance is ±0.01 mm with batch repeatability.
- Diameter range: 0.5–32 mm bar stock
- Typical precision: ±0.01 mm repeatable
- Parts: pins, micro shafts, terminals, fittings
- Capability: guide bushing + live tooling
Custom Aluminum Extrusions
Scintra delivers custom aluminum extrusions including T-slot frames, tubes, extruded heat sinks, and linear guide rails. Profiles in 6063, 6061, 6082, and 6005 alloys are cut to length and CNC-drilled, milled, and tapped. Finishing options cover anodizing, powder coating, and brushing.
- Alloys: 6063, 6061, 6082, 6005 aluminum
- Profiles: T-slot, tubes, heat sinks, rails
- Post-CNC: cut-to-length, drilling, tapping
- Finishes: anodizing, powder coat, brushing
Production & Mill-Turn CNC
Scintra scales production from 1–5 pcs prototypes and 10–50 pcs pilot lots to 100–1,000+ pcs batch and repeat runs. Combined milling, turning, and Swiss machining support multi-process parts. Setup plans, tool wear checkpoints, and drawing revision records maintain lot consistency.
- Prototypes: 1–5 pcs design validation
- Pilot runs: 10–50 pcs process check
- Batch scale: 100–1,000+ pcs repeat supply
- Controls: fixture repeatability & lot ID
Metals & Engineering Plastics
Scintra machines aluminum (6061, 7075, 5052, 6063) and stainless steel (303, 304, 316, 17-4) for structural and corrosive environments. Carbon/alloy steels (1018, 1045, 4140), brass, copper, and titanium are also supported. Polymer options cover POM, PEEK, Nylon, and PTFE.
- Aluminum: 6061, 7075, 5052, 6063 alloys
- Stainless steel: 303, 304, 316, 17-4
- Steels & copper alloys: 1018, 1045, 4140, brass
- Plastics: POM, PEEK, Nylon, PTFE; heat-lot ID
Surface Finishing
Scintra coordinates standard and hard anodizing, stainless passivation, electroplating, bead blasting, polishing, black oxide, and powder coating. Masking areas on threads, bores, and mating faces are planned before machining. Coating buildup is factored into critical tolerances.
- Aluminum: clear, color & hard anodizing
- Stainless & steel: passivation, black oxide
- Coatings: nickel/zinc plating, powder coat
- Prep: thread masking & roughness Ra control
Quality Control & CMM Inspection
Scintra ISO 9001 quality control covers incoming material verification, first article inspection (FAI), in-process checks, and final shipment verification. Inspection tools include CMM, micrometers, pin gauges, thread gauges, and roughness testers. Dimensional reports are provided on request.
- System: ISO 9001, 7-step QC & FAI
- Metrology: CMM, micrometers, thread gauges
- Reference run: 304 shaft ±0.005 mm (50k pcs)
- Medical run: 316 part ±0.01 mm (60k pcs)
Shenzhen Scintra Engineering & DFM Review
Founded in 2009, Shenzhen Scintra (SanCan) Technology Co., Ltd. operates engineering support in Bao'an, Shenzhen, and CNC production facilities in Chang'an Town, Dongguan. All components are machined to customer 3D CAD models (STEP, STP, IGES, X_T), 2D PDF/DWG drawings, or approved samples.
Pre-quotation DFM review evaluates wall thickness, internal pocket radii, deep-pocket machining time, thread standards, and coating thickness allowances on mating bores.
Selecting CNC Turning vs. Swiss CNC Machining
Standard OD/ID CNC turning centers are suited for short-to-medium bushings, sleeves, spacers, flanges, and pipe fittings with metric, UNC/UNF, or BSP threads.
Guide-bushing Swiss CNC lathes handle 0.5–32 mm bar stock for long, slender shafts, pins, and micro terminals where deflection must be minimized.
Custom aluminum extrusions in 6063, 6061, 6082, and 6005 bridge raw profile tooling with cut-to-length sawing, CNC drilling, tapping, and anodizing under one workflow.
7-Step ISO 9001 Quality Control & Export Packaging
Scintra quality management follows seven checkpoints: drawing review, raw material grade and heat-lot verification, first article inspection (FAI), in-process dimensional sampling, surface finish verification, final CMM/gauge inspection, and shockproof export packing.
Custom foam trays, anti-scratch bags, thread caps, and batch-labeled cartons protect machined tolerances and anodized finishes during global transit.
Scintra and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Scintra and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Paul Horn
- Equipment and parts for HNK Machine Tool
- Equipment and parts for SIC MARKING
- Equipment and parts for HAM-LET Group
Documents and sources
- Scintra official website — custom CNC machining parts manufacturer home
- About Shenzhen Scintra (SanCan) Technology Co., Ltd. — Shenzhen & Dongguan
- Scintra 3/4/5-axis CNC milling services and tolerances
- Scintra CNC turning capabilities for shafts, bushings, and sleeves
- Scintra Swiss CNC machining for 0.5–32 mm precision parts
- Scintra custom aluminum extrusions and CNC post-machining
- Scintra production CNC machining workflow and batch scaling
- Scintra CNC machining materials — metals and engineering plastics
- Scintra surface finishing options and tolerance protection
- Scintra quality control workflow, FAI, and CMM inspection
