Paul Horn (HORN) Precision Carbide Tooling Systems
Industrial tooling systems by Hartmetall-Werkzeugfabrik Paul Horn GmbH (HORN) for grooving, Supermini and Mini boring, milling, WSR gear skiving, and PCD/CBN machining.
Supermini and Mini Internal Machining Systems
System Supermini (105, 109, 110) covers internal machining from 0.2 mm to 8 mm diameter across more than 1,500 variants, including face-clamping holder sets. System Mini (106, 107, 108, 114, 116) starts from 8 mm bore diameter. Replaceable carbide inserts and wedges fit both.
- Supermini 105/109/110: 0.2–8 mm bore (>1,500 variants)
- Mini 106/107/108/10P/111/114/116/18P: from 8 mm diameter
- Face-clamping Supermini toolholder sets for Swiss lathes
- Spares: carbide inserts, clamping wedges, screws, holders
Grooving, Axial Turning, and Parting Systems
Paul Horn grooving and parting systems S100/101, 209–274, S224 (PT geometry for Swiss-type lathes), 312–316, 32T, 34T, and 64T handle external, axial, and contour turning. Inserts carry one to six cutting edges. Spare inserts, VDI holders, and clamping screws are replaced.
- Systems: S100/101, 209–274, S224, 312–316, 32T/34T, 64T
- Double-edged S224 with PT chip breaker for Swiss lathes
- One to six cutting edges per precision carbide insert
- Spares: indexable inserts, VDI holders, parting blades
Modular Toolholders, Cassettes, and Swiss Units
Modular grooving systems 220, 840, and 960, cassettes 842 and 845, and Index/Schütte multi-spindle assemblies adapt inserts to lathe interfaces. Quick-change linear units fit Citizen, DMG MORI, Hanwha, Star, Tornos, and Tsugami. Spare cassettes, clamping plates, and nozzles fit.
- Modular grooving systems 220, 840, and 960
- Cassettes 842/845 and multi-spindle units for Index/Schütte
- Linear quick-change units for Citizen, Star, Tornos, Tsugami
- Spares: holder shanks, cassettes, clamping plates, nozzles
Solid Carbide and Indexable Milling Systems
Solid carbide mills DS and DP plus exchangeable-head DG tools machine steels, stainless grades, titanium, CoCr, and aluminum. Systems M101, M310, 382, 383, M475, DAH8, and 304 thread mills (bores up to 8 mm) cover slot and circular milling. Heads, multi-edge inserts, and arbors wear.
- Solid carbide DS/DP mills and exchangeable-head DG cutters
- Slot and groove milling systems: M101, M310, 382, 383, M475
- Circular milling DAH8 and 304 thread mills (up to 8 mm)
- Spares: exchangeable heads, 3–9+ edge inserts, arbors
Gear Skiving WSR, Broaching, Reaming, and Whirling
The WSR gear skiving system produces internal and external gears and splines, while 117 and Supermini tools perform broaching. The portfolio adds DR reaming systems, solid carbide drills, and internally cooled Jet-Whirling thread heads. Skiving blades, inserts, and chucks are replaceable.
- WSR gear skiving system for internal and external gears
- Broaching systems 117 and Supermini; DR reaming systems
- Internally cooled Jet-Whirling thread whirling heads (2018+)
- Spares: skiving inserts, broaching tips, reamer blades, chucks
Ultra-Hard PCD, CVD-D, MCD, and CBN Tooling
Ultra-hard PCD (multi-tooth cutter DTM 1710), MCD/MKD high-polish diamond, CVD-D, and CBN grades machine non-ferrous alloys, abrasive plastics, and hardened steels, backed by Horn Hartstoffe carbide and RC2/RC4 coatings. Replaceable cartridges, tipped inserts, and Greenline blanks fit.
- PCD cutter DTM 1710 for non-ferrous alloys and filled plastics
- PCD, MCD/MKD high-polish, CVD-D, and CBN cutting materials
- In-house Horn Hartstoffe carbide and RC2/RC4 coatings
- Spares: brazed cartridges, tipped inserts, 5-day Greenline tools
Supermini and Mini Internal Machining Selection
System Supermini (105, 109, 110) addresses internal boring, grooving, chamfering, and threading in bores from 0.2 mm to 8 mm across more than 1,500 variants, including face-clamping toolholder sets designed for quick insert changes on Swiss-type automatic lathes.
System Mini (106, 107, 108 with chip-breaking geometry, 10P, 111, 11P, 114, 116, and 18P) extends internal machining from 8 mm bore diameter upward with high-rigidity carbide boring bars and replaceable clamping components.
Grooving, Parting Off, and Modular Toolholder Interfaces
Paul Horn grooving and parting systems S100/101, 209, 216, 217, 223, S224 (double-edged PT chip breaker for sliding-headstock lathes), 229/259, 231, 262, 264, 274, 312, 315, 316, 32T, 34T, and 64T carry one to six cutting edges per insert.
Modular grooving systems 220, 840, and 960, cassettes 842 and 845, VDI holders, and linear quick-change units interface directly with Index and Schütte multi-spindle automatics as well as Citizen, DMG MORI, Hanwha, Star, Tornos, and Tsugami lathes.
Milling, Gear Skiving WSR, and Ultra-Hard Tooling
Milling and rotary tooling spans DS and DP solid carbide end mills, exchangeable-head DG cutters, M101, M310, 382, 383, M475, and DAH8 slot/circular systems, 304 thread mills (up to 8 mm), WSR gear skiving cutters, 117/Supermini broaching tools, DR reaming systems, and internally cooled Jet-Whirling heads.
Founded in 1969 in Tübingen, Hartmetall-Werkzeugfabrik Paul Horn GmbH combines in-house R&D, RC2/RC4 coatings, and Horn Hartstoffe GmbH carbide production with PCD (DTM 1710), MCD/MKD, CVD-D, and CBN grades across 25,000+ standard tools and 5-day Greenline specials.
Paul Horn and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Paul Horn and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Hommel+Keller / zeus
- Equipment and parts for Kitagawa
- Equipment and parts for DMG MORI
- Equipment and parts for UVA LIDKÖPING
Documents and sources
- Paul Horn (HORN) Official Portal — Products and News Overview
- About Hartmetall-Werkzeugfabrik Paul Horn GmbH — History and Production
- HORN Engineering Know-How and Greenline Special Tooling
- Paul Horn Turning Systems — Supermini, Mini, S224, and Parting Off
- Paul Horn Milling Systems — DS, DP, DG, M101, M310, M475, and 304
- Paul Horn Thread Whirling and Jet-Whirling Tool Systems
- Paul Horn Download Area — 2025/2026 Product Catalogues
