Hommel+Keller / zeus Precision Lathe Tooling

Selection of Hommel+Keller / zeus (QUICK, hobit) precision lathe tools: RD/RF form and cut knurling holders, PM-HSS wheels, zeus CORE P1/P2 shanks, marking, burnishing, broaching, and gear cutting.

Form knurling RD1, RD2, and RD3

Hommel+Keller / zeus RD1, RD2, and RD3 form knurling holders cold-deform metal without chip removal, increasing outer diameter. RD1 covers all profiles, RD2 cuts axial RGE knurls, and RD3 handles small end-piece diameters right up to the collar. Wear parts include knurling wheels, pins, and screws.

  • Series RD1, RD2, RD3
  • Chip-free cold forming
  • End, inner, conical knurls
  • Wheels, pins, screws

Cut knurling RF1-LD, RF2-A, and RF3

Hommel+Keller / zeus RF1-LD, RF2-LD, RF2-A, and RF3 cut knurling tools mill profiles with minimal radial load on thin-walled, soft, or tough alloys. RF1-LD targets sliding-headstock lathes, RF2-A adds holder-head toothing, and RF3 works pressure-free. Spare parts: wheels and heads.

  • RF1-LD, RF2-LD, RF2-A, RF3
  • Swiss-type lathe design
  • Low radial load on thin walls
  • Replaceable wheels & heads

PM-HSS knurling wheels

Hommel+Keller manufactures zeus and QUICK knurling wheels from powder metallurgical high-speed steel (PM-HSS) as standard, plus HSS and carbide on request. In-house batch heat treatment and surface coatings optimize service life and runout. Replaceable parts include wheels, pins, and spacer washers.

  • PM-HSS standard; HSS & carbide
  • In-house batch heat treatment
  • Fits zeus and QUICK holders
  • Wheels, pins, spacer washers

zeus CORE quick-change P1 / P2

The patented zeus CORE modular interface fits Swiss-type lathes via P1 shanks (10x16, 12x16, 16x16 mm) and universal centers via P2 shanks (16x20, 20x20, 25x20 mm) with backlash-free repeatability. Heads swap between right- and left-hand setup. Spares: shanks and heads.

  • P1 Swiss shanks: 10x16 to 16x16 mm
  • P2 shanks: 16x20 to 25x20 mm
  • Backlash-free patented joint
  • Base shanks, die heads, clamps

Revolving marking systems

Hommel+Keller / zeus revolving marking heads keep the roll engaged across multiple rotations for high-volume cylindrical, end-face, conical, and groove lettering. Setup requires ø 0.03 mm concentricity and ±0.025 mm diameter tolerance. Spares: marking rolls, pins, bearings.

  • Concentricity ø 0.03 mm required
  • Workpiece diameter tol. ±0.025 mm
  • Groove, end-face, conical marking
  • Marking rolls, pins, bearings

Spring-return marking & stamps

Hommel+Keller / zeus spring-return heads emboss in one partial rotation independent of workpiece diameter (ø 0.03 mm concentricity), right up to a shoulder. Engraving adds scribing rolls and PVD-coated machine or segment stamps. Spares: segments, springs, rolls.

  • Independent of workpiece diameter
  • 3 driving dots before/after text
  • Exchangeable marking segments
  • Segments, springs, PVD stamps

Diamond & roller burnishing

Hommel+Keller / zeus diamond burnishing tools 510 (fixed 35°/45° head) and 520 (±90° swivel) use an 8-fold indexable MKD tip for Rz < 1.0 um up to 65 HRC at 130–150 m/min and 0.02–0.1 mm/rev. Roller burnishing series GW530 and GW540 deliver 450 N spring force, 2 mm travel, and Rz < 1.6 um.

  • Series 510/520 MKD: Rz < 1.0 um
  • Up to 65 HRC, 130–150 m/min
  • GW530/GW540: 450 N, 2 mm stroke
  • MKD tips & R0.4/R0.6/R1.0 rolls

Rotary broaching & gear cutting

Hommel+Keller / QUICK rotary broaching tools use a 2.0° inclination to cut force by 20–30%, feature internal cooling above 40 HRC, and machine square, hex, Torx, Torx Plus, and polygon profiles. Gear hobs and form cutters cut machining time by up to 60%. Spares: broaches and bearing units.

  • 2.0° inclination cuts force 20–30%
  • Internal cooling above 40 HRC
  • Hex, square, Torx, Torx Plus
  • Gear hobs: up to 60% time saving

Form vs. cut knurling selection across RD and RF series

Form knurling holders (zeus RD1, RD2, RD3) plastically displace metal without chips, supporting shoulder, end, inner, and conical knurling when workpiece rigidity allows cold forming. Blank diameter must match the selected pitch.

Cut knurling holders (RF1-LD, RF2-LD, RF2-A, RF3) mill the profile with minimal radial force, making them suited to thin-walled parts, Swiss-type sliding-headstock lathes, soft alloys, and stainless steels.

Modular zeus CORE integration, burnishing, and rotary broaching

The patented zeus CORE quick-change interface uses P1 shanks (10x16, 12x16, 16x16 mm) on Swiss-type machines and P2 shanks (16x20, 20x20, 25x20 mm) on automatic and universal turning centers for backlash-free repeatability.

Turning cycle consolidation expands with diamond burnishing series 510/520 (Rz < 1.0 um up to 65 HRC, 130–150 m/min), roller burnishing GW530/GW540 (450 N, R0.4/R0.6/R1.0 mm rolls), 2.0 degree rotary broaching with internal cooling above 40 HRC, and QUICK/hobit gear cutters.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.