Rapid Granulator Granulators and Shredders

Rapid Granulator equipment (Sweden): 150–800 Series granulators, slow-speed OneCUT PRO, GT and ThermoPRO for thermoforming, Raptor shredders and auxiliaries. Selection by material and installation point.

Rapid 150 Series Beside-the-Press Granulators

The small 150 Series granulators sit beside the injection molding machine to grind sprues and small rejects at once and return the regrind to the process. The 150 mm rotor has staggered cassette knives; DeltaTECH covers standard models and PowerTECH suits filled and abrasive materials.

  • 150 Series rotor diameter: 150 mm
  • 150-21, 150-35, 150-42 motor: 2.2 kW
  • Optional motor: 4.0 kW
  • 150-21 and 150-42 weight: 160 and 220 kg

Rapid 200 Series Granulators for Sprues and Rejects

The 200 Series grinds sprues and rejects from injection molding and blow molding machines. The 200 mm rotor is staggered or open, and the Super-Tangential cutterhouse grips voluminous light products such as jars and bottles. Three rotor speeds are offered: 260, 400 and 840 rpm.

  • 200 Series rotor diameter: 200 mm
  • Rotor speeds: 260, 400, 840 rpm
  • Standard motor: 4.0–5.5 kW
  • Screen hole diameter: 6 mm

Rapid 300 and 400 Open-Hearted Granulators

The 300 and 400 Series work as central or inline granulators for sprues, molded items, profiles, smaller pipes and sheets. The Open-Hearted design opens the whole cutting area for cleaning and knife changes, fixed and rotating knives are both angled, and the screen is reversible.

  • 300 Series rotor diameter: 260 mm
  • 400 Series rotor diameter: 360 mm
  • 300 Series standard motor: 5.5 and 7.5 kW
  • 400 Series standard motor: 15 and 22 kW

Rapid 500 and 600 Open-Hearted Granulators

The 500 Series handles large quantities of sprues, large molded items, pipes, profiles and sheets; the 600 Series tops the Open-Hearted range. The cutterhouse is Super-Tangential, with Pre-Cut as an option. The 600 base can be made of MCT mineral composite against vibration.

  • 500 Series rotor diameter: 450 mm
  • 600 Series rotor diameter: 600 mm
  • 600 Series standard motor: 75 and 90 kW
  • 600-90 and 600-150 weight: 6,500 and 9,000 kg

Rapid 800 Series Granulators for Large Products

The 800 Series is built for high-volume granulation of large products in central and inline processing, and it is also optimized for wet granulation. The patented knife holder system allows knife changes from outside the granulator, and the knives are preset in a fixture.

  • 800 Series rotor diameter: 800 mm
  • Knives: 24 rotating, 8 fixed
  • Cutterhouse: 2000×800 mm
  • Standard motor: 132 kW

Rapid OneCUT PRO Slow-Speed Granulator

OneCUT PRO is a slow-speed granulator for smaller products and sprues. FlexiSPEED changes the rotor speed within 15–35 rpm, and the QRR system opens the housing and disconnects the rotor in about 30 seconds. The fixed knives and cutting hooks are turnable.

  • Rotor speed: 15–35 rpm
  • 100-22, 100-33, 100-44 motor: 1.5 kW
  • QRR rotor release: about 30 s
  • 100-44 cutterhouse: 445×220 mm

Rapid GT, ThermoPRO and 300-LBB for Thermoforming

GT and ThermoPRO granulate skeletal waste inline after thermoforming; with full sound enclosure ThermoPRO runs below 80 dB(A), depending on material. The low 300-LBB runs inline with a roll feeder or under the thermoforming line. Widths: ThermoPRO 600–1200 mm, 300-LBB 900–1500 mm.

  • GT models: GT1100 and GT1600
  • GT rotor diameter: 350 mm
  • ThermoPRO in enclosure: below 80 dB(A)
  • ThermoPRO stand-alone loop control: up to 200 mm

Rapid Raptor FlexiPUSH, PowerPUSH and DUO Shredders

Raptor shredders in 800 and 1350 mm widths reduce all types of thermoplastics, including 1200-liter IBC containers and lumps. FlexiPUSH uses a pneumatic pusher, PowerPUSH a hydraulic one, and Raptor DUO 1350 carries an integrated granulator based on the 400 Series.

  • FlexiPUSH and PowerPUSH rotor: 280 mm
  • FlexiPUSH rotor speed: 60 rpm
  • FlexiPUSH and PowerPUSH motor: 11 and 22 kW
  • FlexiPUSH and PowerPUSH screen: 16–75 mm

Selecting a Rapid Granulator by Installation Point

Beside the molding machine, compact models are used: the 150 Series with a 150 mm rotor, the 200 Series for sprues and rejects from injection and blow molding, and the slow-speed OneCUT PRO at 15–35 rpm.

The 300 and 400 Series work as central or inline granulators, the 500 and 600 handle large volumes, and the 800 suits large products and wet granulation.

For thermoforming skeletal waste there are GT1100 and GT1600, ThermoPRO in 600, 900 and 1200 mm widths, and the low 300-LBB in 900, 1200 and 1500 mm widths. Bulky products, 1200-liter IBC containers and lumps are first reduced by Raptor shredders in 800 and 1350 mm widths.

Materials, Screens and Regrind Size

The manufacturer lists commonly recycled plastics: ABS, EPS, HDPE, LDPE, PA, PC, PC/ABS, PET, PETG, PMMA, PP, PS and PVC. In a granulator, rotating knives cut against fixed knives and the screen sets the output size: regrind is usually less than 25 mm.

A shredder runs at lower speed with higher torque.

Screen holes: 5 mm on the 150 Series, 6 mm on the 200 Series (optional 4, 5, 8, 10 or 12 mm), 8 mm on the 300–600 Series; the 400 and 600 Series offer 6, 10 or 12 mm as options. Raptor FlexiPUSH and PowerPUSH shredders run without screens if needed, with optional holes of 16–75 mm.

The PowerTECH version of OneCUT PRO is for very abrasive materials.

Auxiliaries: Edge Trim Feeding, Metal and Dust

For sheet extrusion edge trim there is the RFE roller feeder in RFE 15, 30 and 45 versions and a guillotine system, usually two guillotines with one for each edge trim.

Metal detectors are installed in the conveyor belt (plate type) or around it (tunnel type), and on slow-speed granulators on the inlet hopper.

Positive pressure dust separation covers DS-50 up to 250 kg/h and DS-800 up to 1,000 kg/h; the negative pressure NPDS 1500 handles up to 1,500 kg/h. Rapid Connect tracks power, temperature and vibration, sends alerts by SMS and email, and works with Rapid machines old and new as well as other brands.

Rapid Granulator Company

Harry Johansson founded Rapid Granulator in 1942 in Bredaryd, Sweden, where the head office, production and development remain. The company builds equipment for recycling industrial plastics such as sprues, rejects, skeletal waste and edge trim rather than household waste.

In North America the company operates as Rapid Granulator Inc. For machine owners the manufacturer runs the Rapid Service Center portal with manuals, wiring diagrams, spare parts lists and maintenance tracking; machine type and serial number are on the machine plate.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.