Bausano Extruders — MD and E-ON Twin Screw, E-GO Single Screw

Extruders by Bausano S.p.A. (Italy): MD twin screw extruders with Multidrive and E-ON conical models for PVC, E-GO single screw extruders for pipes and profiles, E-GO R for recycling, COEX E-GO co-extruders. Selection by task.

MD twin screw extruders with Multidrive drive

MD parallel counter rotating twin screw extruders process rigid, plasticised and filled PVC. MD 52, 66 and 75 serve technical profiles, pipes and compounds; MD 158 and 170 serve pellets, masterbatch and highly filled compounds. From MD 92 up, Multidrive 4×2 runs four motors; smaller sizes use 2×2.

  • Range: MD 52 to MD 170
  • MD 170 main motors: 4 × 55 kW
  • MD 170 installed power: 411/435 kW
  • Smaller models drive: 2×2

E-ON conical twin screw extruders

The E-ON series is built for rigid PVC: corrugated pipes and technical profiles. E-ON 53, 63 and 80 have 53, 63 and 80 mm screws with L/D 23; output for PVC-U pipes is 50–150, 50–270 and 150–400 kg/h. A dry degassing vacuum pump without liquid ring is standard.

  • Screws: 53, 63, 80 mm
  • E-ON 80 PVC-U pipes: 150–400 kg/h
  • E-ON 80 PVC-U profiles: 120–300 kg/h
  • E-ON 80 motor: 69 kW

MD 30 laboratory extruder

MD 30/19 and MD 30/30 are laboratory twin screw extruders for recipe development, feasibility tests and material analysis on PVC, PE, PP, ABS, PLA, additives and masterbatch. The 30 mm screw comes with L/D 19 or 30 and a Multidrive 2×2 drive. Dies cover pelletising, profiles and small pipes.

  • Screw: 30 mm
  • L/D ratio: 19 or 30
  • Main motors: 2 × 1.5 kW
  • Drive: Multidrive 2×2

E-GO single screw extruders for pipes

E-GO pipe extruders come with 45–150 mm screws and L/D 30, 37 or 40. They process PP, PP-R, PE, HDPE, LDPE, PE-X, PE-RT, PMMA, PC, PA and PU into single layer or multilayer pipes. E-GO 150 delivers 1,707 kg/h of PE100 with a 620 kW motor; Maddock mixing elements can be added to the screw.

  • Screws: 45–150 mm
  • L/D ratio: 30, 37, 40
  • E-GO 150 PE100 output: 1,707 kg/h
  • E-GO 150 motor: 620 kW

E-GO single screw extruders for profiles

Profile E-GO extruders come with 45, 60, 70, 75 and 90 mm screws and L/D 25–30. They process PVC, PE, HDPE, LDPE, PP-R, WPC, ABS, PC/ABS and PMMA for window profiles, ducts, roller shutters, skirting boards and window sills. Barrel heating uses ceramic band heaters or induction.

  • Screws: 45–90 mm
  • L/D ratio: 25–30
  • E-GO 90 total power: 135 kW
  • Heating: ceramic band or induction

E-GO R and MD recycling extruders

E-GO R turns HDPE, LDPE and PP into pellets with 45–210 mm screws, L/D up to 47, 30–640 kW motors and 30–2,000 kg/h output. It has one or two high vacuum degassing zones, screen changers and strand, water ring or frontal air cutting. For PVC regranulation, MD 158 and MD 170 run at 260–435 kW.

  • E-GO R screws: 45–210 mm
  • E-GO R output: 30–2,000 kg/h
  • E-GO R degassing: 1 or 2 zones
  • MD for PVC: 260–435 kW

COEX E-GO co-extruders

COEX E-GO units feed an extra layer into a multi-channel die for pipe and profile co-extrusion: identification stripes, functional and protective layers. Screws are 25–35 mm with L/D 25–30 and 3–22 kW motors. Output is up to 80 kg/h of PE, 17 kg/h of PVC. They also handle PEEK, FEP, ETFE and PVDF.

  • Screws: 25–35 mm
  • PE output: up to 80 kg/h
  • PVC output: up to 17 kg/h
  • Motor: 3–22 kW

Dies, calibration and haul-off units

Bausano pipe heads for LDPE, HDPE and PP cover 5–1,200 mm and up to 1,500 kg/h of PE 100; multilayer heads reach 2,000 kg/h, with IPC internal cooling in the mandrel. Profile benches are 3,500–8,700 mm long, haul-offs run from 0.2 to over 27 m/min, cutters include TAV/160 and TAO/1200.

  • Pipe heads: 5–1,200 mm
  • Multilayer heads: up to 2,000 kg/h
  • Profile bench: 3,500–8,700 mm
  • Haul-off: 0.2–27+ m/min

Selecting Bausano extruders by task

For rigid, plasticised and filled PVC, Bausano builds counter rotating twin screw extruders: parallel MD and conical E-ON. E-ON 53, 63 and 80 deliver 50–150, 50–270 and 150–400 kg/h for PVC-U pipes; MD 158 and 170 are designed for pellets, masterbatch and highly filled compounds.

For recipe development there is the MD 30 laboratory extruder with a 30 mm screw.

Pipes in polyolefins and engineering polymers run on E-GO single screw extruders with 45–150 mm screws, profiles on E-GO with 45–90 mm screws. E-GO R recycles HDPE, LDPE and PP at 30–2,000 kg/h, while MD 158 and MD 170 handle PVC regranulation.

COEX E-GO co-extruders add extra layers, and pipe heads cover 5–1,200 mm diameters.

Bausano S.p.A. manufacturing

The company traces its history to 1946, when Clemente Bausano opened a small factory, Costruzioni Meccaniche Clemente Bausano, in Rivarolo Canavese (Turin), soon specialising in plastic extrusion machines.

In 1965 production moved to a larger facility on the outskirts of the town, which is still the headquarters. Address: C.so Indipendenza 111, 10086 Rivarolo Canavese (TO), Italy.

The Multidrive system was patented in 1982 and induction barrel heating in 2024. Bausano do Brasil opened in São Paulo in 1999, and the Rajoo Bausano Extrusion joint venture followed in India in 2011.

Gearbox housings, shafts and gears of the Multidrive transmission are made in the Bausano mechanical workshop in Italy.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.