Rototilt Tiltrotators and Machine Couplers

Rototilt Group equipment (Sweden): RC1–RC9 tiltrotators for 1.5–43 t excavators, RC System control, S and QuickChange machine couplers, buckets and grapples. Selection by excavator weight.

RC1, RC2 and RC3 Compact Tiltrotators

RC1 and RC2 are compact tiltrotators for mini excavators and the last models released in the RC series; the SecureLock safety lock and ILS central lubrication come as standard. RC3 is designed for excavators of 6–12 tonnes. The tool rotates 360° and tilts ±40° to both sides.

  • RC3 excavator class: 6–12 t
  • RC series starts at: 1.5 t
  • Tool rotation: 360°
  • Tool tilt: ±40°

RC4, RC5 and RC6 Pressure-Compensated Tiltrotators

RC4, RC5 and RC6 have pressure-compensated hydraulics, so tilt and rotation work at the same time and independently. The rotor housing is made in one piece and oil-filled, and a hydraulic motor drives rotation through a worm gear. The SecureLock safety lock is standard across the RC series.

  • RC4 rotor housing oil: 1.5 l
  • RC5 and RC6 rotor housing oil: 2.0 l
  • First oil change: at 500 h
  • Next oil changes: every 1,000 h

RC8 and RC9 Tiltrotators for Heavy Excavators

RC8 and RC9 are the heavy models of the RC series. RC9 was launched in spring 2022 as the first product of Rototilt Control and is designed for excavators of 32–43 tonnes with breakout forces of up to 280 kN. Pressure-compensated hydraulics let the tool tilt and rotate at once.

  • RC9 excavator class: 32–43 t
  • RC9 machine breakout force: up to 280 kN
  • RC8 rotor housing oil: 3.0 l
  • RC9 rotor housing oil: 4.0 l

RC System Control and RC Joysticks

RC System is a proportional control system: all tiltrotator functions work in one digging movement, with home position, angle display and pulse function. It has a 4.3 inch touch display, and SecureLock takes two keystrokes. The RC Connect app gives remote troubleshooting and software updates.

  • RC System touch display: 4.3 inch
  • RC Joysticks buttons: up to 8
  • RC Joysticks rollers: up to 4
  • RC Joysticks safety: ISO 13849

QuickChange Automatic Coupler and SecureLock

QuickChange changes hydraulic tools without leaving the cab; it is built into the machine coupler, beneath the tiltrotator and into the attachment frame. The Q14 electrical connector links it to the control system. The SecureLock lock with sensors monitors tool locking and meets EN 474.

  • Coupling pressure drop: halved
  • RISE tests: QC60-5 frame
  • Coupler electrical connector: Q14
  • SecureLock standards: EN 474, ISO 13031

S and QuickChange Machine Couplers

Rototilt S-series machine couplers fit excavators of 2–43 tonnes, and QuickChange versions fit 5–43 tonnes. The frame is tempered steel with a play-free locking wedge. For machines with high locking pressure, a pressure reduction valve brings it down to 50 bar.

  • S-couplers: 2–43 t excavators
  • QuickChange couplers: 5–43 t excavators
  • Locking pressure with valve: 50 bar
  • S-standard attachments: S30–S80

Rototilt Buckets for Tiltrotator Work

Four bucket types: trenching, sorting, digging and universal. The hanger bracket angle is matched to Rototilt tiltrotators and machine couplers. Wear parts and exposed sections use HB450 and HB500 steel, J-series teeth are self-sharpening, and the top section is reinforced.

  • Trenching bucket: 1.5–32 t excavators
  • Sorting bucket: 2–25 t excavators
  • Digging bucket: 1.5–43 t excavators
  • Wear steel: HB450 and HB500

Grapples and AFT Tool Attachment Frames

The new generation of multi and sorting grapples has a load-holding valve integrated into the cylinder and replaceable expander pins; under a tiltrotator they use the AFT ST frame. AFT ST is welded with a bolted coupling ramp, while AFT HD is a heavy-duty frame for hydraulic hammers.

  • Railroad grapples: 10–19 t excavators
  • Grapple frame: AFT ST
  • Hydraulic hammer frame: AFT HD
  • Frame interface standard: Open-S

Selecting a Rototilt Tiltrotator by Excavator Weight

Rototilt RC tiltrotators cover excavators of 1.5–43 tonnes: RC1 and RC2 for mini excavators, RC3 for 6–12 tonne machines, RC4–RC9 with pressure-compensated hydraulics, and RC9 for 32–43 tonne excavators with breakout forces of up to 280 kN.

The tiltrotator is mounted on a machine coupler (sandwich), so it can be set aside to work with the tool alone, or directly on the stick for a lower installation height. S-couplers fit excavators of 2–43 tonnes and QuickChange couplers fit 5–43 tonnes.

Control and Excavator Integration

RC System is a proportional control system with a 4.3 inch touch display and RC Joysticks, and it can be fully integrated with the MiC 4.0 standard. The RPS positioning solution shows the tool position in Leica, Topcon, Trimble, MOBA/Novatron and other excavation systems.

Volvo excavators with the Smart Connect option are delivered prepared for Rototilt tiltrotators. Since September 2025 the Komatsu PC220LC/LCi-12 is available with factory preparation for Rototilt, and an OEM agreement with Hitachi Construction Machinery Europe applies from early 2026.

Couplers, Open-S and SecureLock

Open-S is an open standard for fully automatic quick couplers built on the S standard; Rototilt and Steelwrist launched it in 2020. Open-S links to MiC 4.0 through the Open-S V14 electrical connector, while QuickChange uses the Q14 connector.

The SecureLock lock with sensors monitors tool locking, meets EN 474 and ISO 13031, and is standard in the RC series and all QuickChange products. RISE tests on machine couplers and the QC60-5 frame documented high flows and low pressure drops.

Rototilt Group Company

The first tiltrotator under the Rototilt name was launched by Noreco in 1986; in 1992 the product rights passed to Indexator, and in 1997 the RT60 got an oil-filled rotor housing. Since 2015 the company has been called Rototilt Group AB and is owned by the family of Anders Jonsson.

The head office and a large part of production are in Vindeln, Sweden, and the group has over 300 employees. In 2021 the factory was expanded by 4,600 square meters with an investment of over SEK 160 million, and in spring 2022 the RC9 opened the Rototilt Control line.

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.