Indexator Rotator Systems: GV, AV and XR Hydraulic Rotators and Swivels
Technical overview of Indexator Rotator Systems AB (Sweden) rotators: GV, G, GX, AV, H, HX, IR, XR and SR series, K100 hose swivels and MPB swing dampers with model designations.
GV Grapple Rotators
GV rotators combine rotation with the grapple function: grapple open and grapple close. The GV 3, GV 4, GV 6, GV 12, GV 124, GV 14 and GV 17 models cover lifting capacities from 30 kN on the GV 3 to 160 kN on the GV 17. The GV 124 adds hydraulic channels for grapple saws or harvester heads.
- GV 3: 30 kN lifting capacity
- GV 12: 100 kN, part no. 5212049
- GV 17: 160 kN for terminal cranes
- GV 124: extra hydraulic channels
AV Harvester Head Rotators
AV rotators are fitted under harvester heads: AV models only have a rotation function, with no grapple function. The range includes AV 4, AV 12, AV 14 and AV 17. Lifting capacity runs from 45 kN on the AV 4 for lighter thinning to 160 kN on the AV 17 for heavy lifting.
- Rotation function only
- AV 4: 45 kN for lighter thinning
- AV 17: 160 kN for heavy lifting
- Models AV 4, AV 12, AV 14, AV 17
XR Heavy-Duty Rotators
Compact XR rotators run on slew bearings that handle radial and axial forces in forestry, timber handling, recycling and scrap handling. A vane motor drives rotation, with a relief valve in the motor. C versions add a central lubrication duct. Range: XR 300 to XR 600.
- Slew bearings for radial and axial forces
- Central lubrication duct (C models)
- XR 300 LS: part no. 8300003
- XR 600 E P X2 C: part no. 8600017
G and H Rotators for MPB
The G (grapple) and H (harvester) rotators of the new generation are purpose-built for MPB multi plate brake swing dampers. G range: G 101, G 121, G 141, G 171; the G 121 suits forwarders, timber trucks and material handling. H range: H 101, H 121, H 122, H 152, H 182. GV and G parts do not match.
- Grapple models G 101 to G 171
- Harvester models H 101 to H 182
- Built for MPB swing dampers
- GV and G parts are not interchangeable
IR Rotators for Excavators
IR rotators are designed for excavators and large cranes in forestry, material handling, scrap handling, recycling and timber handling. Range: IR 10, IR 12, IR 20, IR 22, IR 25. The IR 10 comes as a mechanical rotator without a motor and as a variant for up to five grapple cylinders.
- Models IR 10, 12, 20, 22, 25
- Up to five grapple cylinders direct
- Mechanical version without motor
- IR 10 M20: part no. 8000309
Low-Profile GX and HX Rotators
In the low-profile GX (grapple) and HX (harvester) rotators, external loads pass through the outermost part of the rotator, separate from the motor function. The GX 30 Y LS 203 targets tougher applications such as large forwarders. HX range: HX 25 LS, HX 35 LS, HX 35 Q LS, HX 35 D LS.
- External loads bypass the motor
- GX 30 Y LS 203: part no. 7320000
- HX 25 LS: part no. 7250000
- HX 35 LS: part no. 7350000
K100 and IDL Hose Swivels
Indexator hose swivels remove hose twisting: twisting a hose by as little as 10° shortens its service life by up to 90 percent. The K100 series uses a seal and support ring for high pressure plus a dirt and water-resistant seal. Versions include K100 G1/2 (9010000) and IDL G 1 - G 1 (5001294).
- 10° twist cuts hose life by up to 90%
- K100 seal and support ring
- K100 G1/2: part no. 9010000
- IDL G 1 - G 1: part no. 5001294
Swing Dampers, Links and Manifold Blocks
For most crane models Indexator offers links, single and dual swing dampers, including versions with protected hose routing. MPB swing dampers use multi plate disc braking. For grapples on XR rotators, manifold blocks feed oil to the grapple cylinder with axial (A) or radial (R) connection.
- Single and dual swing dampers
- MPB multi plate brake
- Manifold blocks: A axial, R radial
- Protected hose routing options
Indexator Rotator Series and Machine Fit
Indexator Rotator Systems AB develops and builds rotators in Vindeln, about 45 minutes northwest of Umeå, Sweden. The company has about 100 employees, around 80 per cent of production goes to more than 40 markets, and every product is individually tested.
Grapples on forestry and loading machines use GV, G and GX rotators; harvester heads use AV, H and HX; excavators and large cranes use IR; heavy bearing-equipped duty uses XR; skidders and full tree handling use SR.
Model Code Designations
The serial number is engraved on the rotator next to the model decal, on the processed section of the lower stator.
Letters in the code: LS means built for load sense with no restrictors; C means an extra duct through the rotator for central lubrication; K means a 4 bolt layout with cc 140 mm; A means axial connections only for grapple open and grapple close.
GV and G parts do not match because the two series differ in design, so a GV cannot be converted to a G. XR manifold blocks carry A (axial connection) or R (radial connection).
Swivels, Swing Dampers and MPB Brake
Twisting a hose by as little as 10° shortens its service life by up to 90 percent, so K100 or IDL hose swivels sit between the crane and the rotator. The K100 uses a seal and support ring for high pressure.
Brake block tightening torque is 30 Nm maximum, 60 Nm for the MPB brake; cleaning the MPB brake every 600 operating hours is recommended.
Indexator Rotator Systems and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Indexator Rotator Systems and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.
Related equipment manufacturers
- Equipment and parts for Vektek
- Equipment and parts for Velan
- Equipment and parts for Vecoplan
- Equipment and parts for VEIT
Documents and sources
- Indexator rotators — series overview
- GV rotators — model list
- GV 3 rotator — lifting capacity
- GV 4 rotator — lifting capacity
- GV 6 rotator — lifting capacity
- GV 12 rotator — versions and part numbers
- GV 17 rotator — lifting capacity
- GV 124 rotator — extra hydraulic channels
- AV rotators — model list
- AV 4 rotator — lifting capacity
- AV 17 rotator — lifting capacity
- XR rotators — models and part numbers
- XR rotators — design in brief
- G rotators — models for MPB
- G 121 rotator — applications
- H rotators — harvester models
- IR rotators — excavators and cranes
- IR 10 rotator — versions
- GX rotators — low-profile design
- HX rotators — harvester models
- SR rotators — skidders
- Indexator swivels — hose protection
- K100 swivel — seal design
- G-G swivels — part numbers
- Links and swing dampers — overview
- Single swing damper — MPB brake
- Manifold blocks — A and R connections
- FAQ — designations and maintenance
- About us — production in Vindeln
- History — owners and Lifco group
- Rototilt name change — company notice
