Hassia-Redatron Packaging Machines and Spare Parts

German-engineered Hassia-Redatron vertical form-fill-seal machines (FlexiBag Bi/Bc pouch, Si sachet, STi StickPack), dry/liquid dosing systems, and OEM-grade spare parts sourced to order.

FlexiBag Bi/Bc Pouch Machines

FlexiBag Bi/Bc 260, 260 Twin, 400, 400 Duplex, and 600 are Two-Mode-Tec vertical form-fill-seal machines (Bi intermittent and Bc continuous). They pack products into 50-600 mm pouches from laminates, paper, and monofilms. We source forming sets, belts, jaws, and sensors.

  • Pouch width 50-600 mm, length up to 1100 mm
  • Film width up to 1240 mm, reel up to 600 mm
  • Output up to 140 (Bi) / 200 (Bc) cycles/min
  • Parts: forming sets, belts, jaws, sensors

FlexiBag Si Sachet Machines

Servo-driven 4-side sealed FlexiBag Si 300, Si 500, and Si 600 machines run 2 to 15 lanes for powders, gels, sauces, and cosmetics. They feature roller or gripper take-off, ~92 C hot filling, and Schneider/Elau or Rockwell PLC. Spares include heaters, jaws, and knives.

  • Up to 6 / 12 / 15 lanes (Si 300 / 500 / 600)
  • Format width max 600 mm, film max 1200 mm
  • Output around 100 cycles/min (DIN 8743)
  • Parts: heaters, sealing jaws, knives, dies

FlexiBag STi StickPack Machines

FlexiBag STi 300, STi 300 Duplex, and STi 450 produce 3-side sealed StickPacks across up to 15 or 2x12 lanes for powders, granules, and pastes. Cross jaws reach 900 mm with 200 mm draw-off and up to 80 cycles/min. Spares cover grippers, forming sets, jaws, and knives.

  • Up to 12, 2x12, and 15 lanes
  • Cross jaw width up to 600 / 2x600 / 900 mm
  • Draw-off length max 200 mm, up to 80 cycles/min
  • Parts: grippers, forming sets, jaws, knives

Dosing Systems and CIP/SIP

Dosing units include volumetric screw, cup, and belt fillers plus gravimetric scales for dusty powders, alongside liquid and paste fillers. Extended CIP/SIP systems use automated pneumatic cleaning tubs and Gemu venting valves. We supply augers, seals, and valves.

  • Dry dosing: auger, volume cup, multi-head scales
  • Wet dosing: low-viscosity fluids to heavy pastes
  • Extended CIP/SIP with automated tub and Gemu valves
  • Parts: augers, seals, Gemu valves, filling tubes

Sealing, Die-Cutting and Ultra Clean

Sealing options include digital heating pixel matrices, ultrasonic sealing for flowables and silica gel, and contour die-cutting. Ultra Clean systems apply UVC light and peroxide-lactic acid fogging (VDMA log 3, 99.9%). Spares include pixel bars, horns, dies, and lamps.

  • Digital sealing: individual heating pixel matrix
  • Ultrasonic sealing for silica gel and flowables
  • Contour die-cutting and rounded corner punches
  • Ultra Clean: UVC + fogging (VDMA log 3, 99.9%)

Legacy Portfolio and Control Retrofits

Portfolio support covers legacy FVL, FVP, FVT, FVU, SVL, SVP, FB, CB, RV, SRV, VMS, and VSC lines plus Deltapack (Delta, Deltacon) and Piltz (FB 240/330/630) baggers. Retrofits include condition surveys and PLC, drive, and HMI upgrades using original design archives.

  • Legacy FVL/FVP/SVL/SVP/FB/RV/SRV/VMS/VSC
  • Deltapack (Delta, Deltacon) and Piltz FB baggers
  • Control upgrades: PLC, power drives, HMI panels
  • Drawing archive spare parts for older machines

Turnkey Packaging Lines and Sealing Technologies

Hassia-Redatron vertical form-fill-seal machines (Butzbach, Germany) process heat-sealable laminates, paper films, and mono-materials.

Alongside peripheral partners, Hassia-Redatron supplies integrated packaging lines with dry or liquid feeding systems, checkweighers with tendency control, collecting and counting stations, and transfer units to secondary cartoning.

Depending on product and film behavior, machines can incorporate digital heating pixel matrices, ultrasonic sealing (including silica gel applications), contour die-cutting, or VDMA log 3 Ultra Clean UVC plus peroxide-lactic acid film disinfection.

Dosing Selection and Format Engineering

Selecting across FlexiBag Bi/Bc pouchers, FlexiBag Si 4-side-seal sachet machines, and FlexiBag STi StickPack lines depends on pouch dimensions, film width, lane count (2 to 15 lanes, or Twin/Duplex configurations), and required cycle rate under DIN 8743.

Dry products use volumetric screw, cup, or belt dosing as well as gravimetric multi-head or screw scales with dust extraction.

Liquid and pasty products from emergency water to high-viscosity sauces and pharmaceuticals (~92 C hot fill or Ultra Clean cold fill) use CIP/SIP dosing systems with automated pneumatic cleaning tubs and Gemu lane-venting valves.

Hassia-Redatron and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Hassia-Redatron and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.