Broadcom / Avago Technologies (PLX) Industrial Optoelectronics, Encoders & Fiber Optics

Industrial gate drive optocouplers (ACPL/HCPL), absolute & incremental encoders (AS38/HEDS/AEAT), Versatile Link fiber optics (HFBR/AFBR), and PLX PCIe switches for CNC, PLC, and drives. Hardware components only, excluding enterprise software.

IGBT & SiC MOSFET Gate Drive Optocouplers

Isolated gate drivers ACPL-355JC, ACPL-333J, and HCPL-316J deliver 0.4 A to 10 A output with 95–140 ns delay. DESAT protection, FAULT feedback, UVLO, and Miller clamping protect IGBT and SiC drives.

Stretched SO-16 packages serve CNC and VFD repairs.

  • Peak output current: 0.4 A to 10 A (ACPL-355JC 10 A)
  • CMR immunity: up to 100 kV/µs (ACNT-H343 / ACPL-355JC)
  • Reinforced VIORM insulation: up to 2262 VPEAK
  • Packages: SO-16, stretched SO-8, DIP-8 / gull-wing

Current & Voltage Isolation Amplifiers (ACPL-C / ACNT-H79)

ACPL-C79x, ACNT-H79x, and ACPL-C87xU optical isolation amplifiers monitor phase shunts and high-voltage DC buses.

Sigma-delta modulation delivers 100–200 kHz bandwidth, 1.6 µs response, and 0.5% gain accuracy.

Used to restore current sensing channels in industrial drives.

  • Gain tolerance tiers: ±0.5% (B), ±1% (A), ±3% (0)
  • Bandwidth: 200 kHz (current) / 100 kHz (voltage)
  • Working voltage VIORM: 1414 VPEAK to 2262 VPEAK
  • Temperature rating: -40 °C to +105 °C / +125 °C

Digital Fieldbus & IPM Interface Optocouplers

Dual and quad CMOS optocouplers ACPL-074L (15 MBd), ACPL-064L (10 MBd), and ACML-7400 (100 Mbps) isolate industrial fieldbuses.

ACNV4506 provides rugged isolation between logic MCUs and intelligent power modules (IPM).

Direct replacements repair damaged RS-485, PROFIBUS, and PLC I/O ports.

  • Data rates: 10–15 MBd CMOS, up to 100 Mbps (ACML-7400)
  • Supply voltage: 3.3 V / 5 V mixed-voltage translation
  • Operating range: -40 °C to +105 °C / +125 °C
  • Interfaces: RS-232, RS-422, RS-485, PROFIBUS, IPM

Optical & Magnetic Absolute Encoders (AS38 / AEAT / AR)

AS38-H39E optical kit encoders deliver 23-bit single-turn plus 16-bit battery-less energy-harvesting multi-turn tracking.

AR49, AS20, AR25/AR55 sensors and AEAT-9955 magnetic ICs output BiSS-C, SSI, SPI, and UVW signals.

Engineered as drop-in servo motor feedback assemblies.

  • Total resolution: 39-bit (AS38-H39E) and 10–18 bit (AEAT-9955)
  • Protocols: BiSS-C / SSI up to 10 Mb/s, SPI, ABI, UVW
  • Multi-turn design: battery-less Wiegand EHMT harvesting
  • Industrial specs: -40 °C to +125 °C (AEAT-9955), IP50

Optical Incremental Encoder Modules (HEDS / AEDR / AELT)

HEDS-9000/9100/9200 transmissive modules, AEDR-8400/9820/9930 reflective sensors, and AELT-8000 kits output quadrature TTL signals.

Standard HEDS-9000/9100 units support 96 to 1000 CPR from -40 °C to +100 °C.

Compact AEDR-8400 SMD modules replace worn feedback heads in tight stages.

  • Transmissive CPR: 96 to 1000 CPR (HEDS-9000 / HEDS-9100)
  • Reflective density: 254 and 318 LPI (AEDR-8400, 2.8 V)
  • Outputs: two-channel quadrature A/B and index TTL signals
  • Operating temperature: -40 °C to +100 °C (HEDS series)

Quadrature Decoders & Motion Interface ICs (HCTL / AEIC)

HCTL-2032-SC 32-pin quadrature decoder-counters and AEIC-3700 differential ICs link encoders to host CPUs.

Replacing these chips restores hardware axis counting on legacy CNC and multi-axis boards.

Obsolescence notice OBS0728164D1 covers legacy HCTL maintenance.

  • Legacy decoder IC: HCTL-2032-SC 32-pin SOIC CMOS counter
  • Driver / receiver IC: AEIC-3700 differential encoder interface
  • Core function: hardware 4x quadrature decode and bus readout
  • MRO focus: drop-in repair chips for legacy CNC axis cards

Industrial Fiber Optics (Versatile Link / HFBR / AFBR)

Versatile Link HFBR-0500Z (660 nm), AFBR-1529Z/1539Z (DC–10 MBd), and HFBR-1414Z/2416Z (820 nm) transceivers eliminate ground loops in noisy plants.

AFBR-5978Z SC-RJ transceivers handle Fast Ethernet and Profinet links.

Modular snap-in connectors and patch cords simplify cabinet board servicing.

  • POF / HCS reach: up to 50 m (1 mm POF) and 200 m (200 µm HCS)
  • Glass fiber reach: up to 2700 m with 820 nm HFBR-1414Z/2416Z
  • Data rates: DC to 10 MBd and 100 Mbps Profinet (AFBR-5978Z)
  • Connectors: Versatile Link HFBR-4501Z snap-in and SC-RJ

PLX PCIe Switches, Industrial Ethernet & LED Indicators

ExpressFabric PEX89000 (Gen 5.0, 144 lanes, 115 ns), PEX88000, and industrial-temp PEX8700/8600 switches interconnect multi-host backplanes.

BCM5315x RoboSwitch Gigabit ICs integrate TSN and 10GbE uplinks.

HDSP-2530..2534 8-digit LED displays and HLMP lamps maintain operator HMI panels.

  • PCIe fabrics: PEX89000 Gen 5.0 (144 lanes / 72 ports, 115 ns)
  • Industrial GbE: BCM5315x with TSN and integrated Cortex-M7
  • Smart displays: HDSP-2530..2534 8-char 5x7 dot matrix LED
  • Indicator lamps: AlInGaP Red/Amber and InGaN Green/Blue HLMP

Power Stage Isolation for Motor Drives, VFDs & Inverters

Broadcom / Avago Technologies gate drive optocouplers (ACPL-355JC, ACPL-333J, HCPL-316J, ACNT-H343) combine reinforced IEC 60747-5-5 insulation up to 2262 VPEAK with fast DESAT fault detection and active Miller clamping for IGBT and SiC MOSFET modules.

Paired with sigma-delta current isolation amplifiers (ACNT-H79x) and DC-bus voltage sensors (ACPL-C87xU), they maintain stable control loops under high dv/dt switching transients up to 100 kV/µs.

Motion Control Feedback & Legacy Maintenance Compatibility

Battery-less AS38-H39E multi-turn optical encoders (39-bit combined resolution via Wiegand energy harvesting) eliminate backup battery service cycles on servo axes, while programmable AEAT-9955 magnetic encoder ICs scale from 10 to 18 bits.

Standard incremental encoders (HEDS-9000/9100, AEDR-8400/9930, AELT-8000), differential AEIC-3700 interfaces, and HCTL-2032-SC quadrature decoders (covered under OBS0728164D1) support both new CNC architectures and fleet maintenance.

Industrial Fiber Links, PCIe ExpressFabric & TSN Ethernet

Versatile Link transmitters and receivers (HFBR-0500Z at 660 nm, AFBR-15x9Z from DC to 10 MBd) isolate PLC and rectifier racks over 1 mm POF (50 m) or 200 µm HCS (200 m), while 820 nm HFBR-1414Z/2416Z links reach 2700 m and AFBR-5978Z handles 100 Mbps Profinet.

Backplane connectivity relies on ExpressFabric PEX89000 PCIe Gen 5.0 switches, industrial-temp PEX8700/8600 ICs, BCM5315x TSN Gigabit Ethernet switches, and HDSP-2530..2534 operator panel displays.

Broadcom / Avago Technologies and model names are trademarks of their respective owners and are used only to identify the equipment for which we source parts. SpareX is not an official dealer, distributor or representative of Broadcom / Avago Technologies and is not affiliated with the trademark owner. Origin, documents and warranty are stated for each item in the quotation.

Related equipment manufacturers

Documents and sources

Industrial equipment

Request a quote

Describe your requirements and attach up to 5 files, each up to 20 MB.

You can also drag photos or documents here.

You can also email us. Opening your email app does not send an enquiry automatically.

WeChat · Nastia

English-speaking contact

WeChat QR code: Nastia

Scan the QR code to add Nastia on WeChat.

Save QR image

On this phone: save the image, then choose it from your photos in WeChat’s scanner.

Telegram · Nastia

Contact Nastia

Telegram QR code: @ananasprosto

Scan the QR code or open @ananasprosto in Telegram.@ananasprosto в Telegram.

Save QR image

Scan the QR code or open @ananasprosto in Telegram.